Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

PCP Epic Vision .22 420mm

Dairyboy

HAM Sniper
373
1,245
WA
HAM Points
1,292.50
Airguns of Arizona - 10% discount
Country flag
As a Taipan fan, I've always been curious about Epic airguns as they are owned by the same people. The Epic 2 didnt interest me much as heard about slow first shots and heavy with the rear butt stock. Wasn't aware of the Epic 2 lite until recently but still wasn't sure about the valves and slow first shots.

I then learned about the Vision and I was liking what I was seeing. Redesigned valve specifically for the slow first shots and easier tuning was big to me. And was designed for hunters in mind. Like said a big Taipan fan but generally like a Carbine for shooting and wanted something with alittle more power and adjustability than my Long. Didnt want to change it into something it wasnt.

Seeing the 420mm .22 Vision was capable of 53fpe, i knew it had the power i was looking for. The AR platform is of course something i prefer also. Forward cocking and something with externally adjustable reg and HS with marking so I know exactly where its set. And of course a unchoked CZ barrel. I was really hoping it would shoot my 20.83gr KOs really well. So I took the chance. And so far im thrilled with it.
20260505_210608.webp
Got it yesterday and no lack of quality here. Very impressed with the fit and finish and the balance felt great. Cocking is almost effortless and really smooth. Trigger is great. Mags are easy to load and there is absolutely no resistance when pushing a pellet or slug forward through the mag. Very well designed. Came shooting the 20.83gr KOs at 950fps at a 145bar reg pressure. Alittle too hot for my liking. The chrony printout I got with the gun showed 880fps with the 25.3gr pellets. Anyways testing accuracy I wasn't disappointed at all. Really likes the 20.83gr KOs and even shooting the 20.83gr Lights did well at 970fps. Anyways gun was loud and so I backed put the HS to the 1st line at got me to 935fps. Lowered my reg pressure to about 100bar and was shooting at 860fps. Im set now at 120bar and shooting the KOs at 900fps. Very very accurate at 50yds. Shot 10, 5 shot groups at 52yds and the biggest of the groups I think was .6" and had quite a few under .4"
20260505_211723.webp20260505_211735.webp
The biggest question was going to be in the morning, does it have a slow first shot. Checked the reg in the morning after sitting over night and no reg creep. And first shot on the chrony was exactly where it should have been. Really looking forward to shooting this gun more.
 
Oh im getting reg creep of course. I swear the last 3 or 4 guns ive bought all seem to have an issue. But it is what it is. Ive owned alot with very minimal problems but seems my luck has run out lol
Maybe the reg picked-up a tiny chip from the machining process that wasn't cleaned out before assembly. Might be worth pulling the reg, loosening the washers and blowing it out with an air compressor.
 
Nice looking pcp @Dairyboy, looks like a pesters dream indeed!
My .22 Ghost HP came to me @ exactly 53fpe with the 600mm barrel/Mrds, so quite impressive power numbers. I agree 100% on poor first shot accuracy, some of my airguns will sit for a week or 3 before I grab one to take a pesting shot. If I can't hit what im aiming at it better be my fault and not the gun lol.
Hopefully you get the reg creep sorted, did it only happen after you lowered your reg pressure?🤔
Taipan/Epic...one of the few airgun brands that aren't sold in Canada that I wish were.
 
Maybe the reg picked-up a tiny chip from the machining process that wasn't cleaned out before assembly. Might be worth pulling the reg, loosening the washers and blowing it out with an air compressor.
I did clean the reg best I could. Didn't see anything wrong really. But the disk at the bottom that holds the small ball bearing I couldn't remove, or shall I say without potentially damaging it. That part is the one people have changed and fixed the creep. Im waiting on Epic to see how to do that part.
 
Nice looking pcp @Dairyboy, looks like a pesters dream indeed!
My .22 Ghost HP came to me @ exactly 53fpe with the 600mm barrel/Mrds, so quite impressive power numbers. I agree 100% on poor first shot accuracy, some of my airguns will sit for a week or 3 before I grab one to take a pesting shot. If I can't hit what im aiming at it better be my fault and not the gun lol.
Hopefully you get the reg creep sorted, did it only happen after you lowered your reg pressure?🤔
Taipan/Epic...one of the few airgun brands that aren't sold in Canada that I wish were.
Thanks! It's a really good gun. Very accurate and easy to shoot. Yes first shot is very important and the new valve seems to have fixed that. Well the creep doesn't but no big deal ill get it sorted one way or another. So I lowered the reg the first day and tuned it to my liking. I then checked the next day and no creep and first shot was dead on where it was supposed to be. The 3rd day I degassed the gun to twist the end cap a hair to make it so the gauge sat at 90* as it was more at about a 45* angle. After that is when I noticed the creep the next day. So I dont think it was the adjustment at all but after the degas it messed it up which is weird but is what it is.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top