Red Wolf Red Wolf probe

[Shortcut]

I did a trade and got this very nice Red Wolf HP Midnight with a Heliboard in .22 cal. I have had Red Wilfs before but never with the Heliboard so that will require some learning. I also have never seen a pin probe like this as it has threads anyone know if there is something missing or just the way it’s made.

 

[pan60]

bump

 

[Solo1]

Looks to me like someone cut the pin off and drilled and taped to be able to change seating depth. Thats not stock. Here’s a pic of mine

 

[Shortcut]

I knew it wasn’t stock, seems to work fine.

 

[Pesty3782]

You can reach out to AoA for a replacement, but I know they will be setting up EBR starting Monday…

Tony P.

 

[Shortcut]

Good luck at EBR Tony!!

 

[GHairgunner]

I had one of those but it was just for testing. I was using it to change the seating depth and figure out how long my permanent length needed to be. The air flow over the screw threads was so bad that it didn't give the results I was looking for.

 

[Pesty3782]

Good luck at EBR Tony!!

Thanks...We have Barb's ghost all setup, I got Matt's (Youngest son) ghost setup and finally started working on mine ......

I hope you get the probe figured out if you need me to drop by AoA after EBR just let me know.

Tony P.

 

[Shortcut]

Thanks...We have Barb's ghost all setup, I got Matt's (Youngest son) ghost setup and finally started working on mine ......

I hope you get the probe figured out if you need me to drop by AoA after EBR just let me know.

Tony P.

Thank you Tony, I will give Jared a call after EBR is over. Don’t set up Barbara and Matt’s Ghosts to good or they might do better then you! Oh well that’s what Dad’s and husbands do. Best of luck to all three of you and have fun!!!