New Pinty P-Force rifles

[JimT66]

Ok, here is pic of playing a round with the .22 grain Apollo slugs. When I seen it would shoot them, I fired a few just to.see.how accurate they would be. No adjustments made to the scope at all.

 

[JimT66]

This is the new scope. The one I ordered for the P-Tac was Inoperable. Half of it is black inside, it started by not holding zero, and got much worse. This CVlife scope is pretty nice though. Great magnification, adjusts down to 10 meters, and is red/green reticle..

 

[PapaT]

Looks like it's doing good so far.

 

[Hvacguy]

Thanks for posting these pics. It’s hard to find personal experiences online! Are the picatinny and mlok bits aluminum or polymer?

 

[JimT66]

Thanks for posting these pics. It’s hard to find personal experiences online! Are the picatinny and mlok bits aluminum or polymer?

They are aluminum. The only polymer is the pistol grip and forearm.

 

[JimT66]

Thanks for posting these pics. It’s hard to find personal experiences online! Are the picatinny and mlok bits aluminum or polymer?

Since you brought that up, I remember I have a whole.pack of different sized mlok rails! I just attached 3 of them.

 

[Hvacguy]

Since you brought that up, I remember I have a whole.pack of different sized mlok rails! I just attached 3 of them.

Nice! Is the Moderator effective? Earlier reports said it didn’t tame the bark much. No idea what settings they used though. Also read it was not 1/2 UNF threads which is a huge bummer. Can you see what the moderator internals look like? Curious if they went with baffles, foam, or both.

 

[JimT66]

Nice! Is the Moderator effective? Earlier reports said it didn’t tame the bark much. No idea what settings they used though. Also read it was not 1/2 UNF threads which is a huge bummer. Can you see what the moderator internals look like? Curious if they went with baffles, foam, or both.

No, it's not 1/2 threaded unfortunately. Thinking it's 14x1. The moderator does work, but it's short so it does still make noise. Take it off though and it will really give you a blast. I am having a new one made now, from this file.
I'm not 100% on the internals of factory suppressor, but think I read it is baffles.

 

[JimT66]

Nice! Is the Moderator effective? Earlier reports said it didn’t tame the bark much. No idea what settings they used though. Also read it was not 1/2 UNF threads which is a huge bummer. Can you see what the moderator internals look like? Curious if they went with baffles, foam, or both.

I can tell you though for a .22 cal, it's nowhere near as loud as my .22 Condor, or my .25 EscapeSS. If you have any experience with AirForce rifles to go by, that will help.

 

[PapaT]

No, it's not 1/2 threaded unfortunately. Thinking it's 14x1. The moderator does work, but it's short so it does still make noise. Take it off though and it will really give you a blast. I am having a new one made now, from this file.
I'm not 100% on the internals of factory suppressor, but think I read it is baffles.

It is definitely M14x1.0, you could put it on your P-Rifle if you wanted.

 

[JimT66]

It is definitely M14x1.0, you could put it on your P-Rifle if you wanted.

hmmm, I wonder how the P-rifle would sound with the shorter suppressor? I never bothered to get one for it. Now I gonna have to find out. Guess I will need to remove the P-rifle tube to get it to fit.

 

[Hvacguy]

I’m curious about comparability with AF guns. Is this a true 1:1 clone? If so, I may pick one up just as a donor for my condors. I don’t expect the trigger group for example to be drop in. But what about the breech or hammer? Would love to see someone try this out!

 

[JimT66]

I’m curious about comparability with AF guns. Is this a true 1:1 clone? If so, I may pick one up just as a donor for my condors. I don’t expect the trigger group for example to be drop in. But what about the breech or hammer? Would love to see someone try this out!

One of the guys on another page is a head guy at pyramyd air. He has used .177 and .22 airforce barrels in the P-tac, just by turning the small end down a little, and said prolly can with 25. Other stuff though, I havent seen it said. So I kinda doubt it.

 

[PapaT]

hmmm, I wonder how the P-rifle would sound with the shorter suppressor? I never bothered to get one for it. Now I gonna have to find out. Guess I will need to remove the P-rifle tube to get it to fit.

Just have to take the cap off the end to expose the threads on the end of the tube. P-Rifle barrel is threaded 1/2x20UNF. I love my RCO moderator on my P-Rifle though.

 

[JimT66]

I’m curious about comparability with AF guns. Is this a true 1:1 clone? If so, I may pick one up just as a donor for my condors. I don’t expect the trigger group for example to be drop in. But what about the breech or hammer? Would love to see

Just have to take the cap off the end to expose the threads on the end of the tube. P-Rifle barrel is threaded 1/2x20UNF. I love my RCO moderator on my P-Rifle though.

Just have to take the cap off the end to expose the threads on the end of the tube. P-Rifle barrel is threaded 1/2x20UNF. I love my RCO moderator on my P-Rifle though.

I know his moderator on my Elf sure makes it quiet! He definitely knows his stuff

 

[Hvacguy]

@JimT66 were you able to confirm if the shroud is threaded 14x1.0mm?

 

[JimT66]

@JimT66 were you able to confirm if the shroud is threaded 14x1.0mm?

It is. I even had a moderator made for it. Will be picking it up Saturday.

 

[JimT66]

This is it. Made from files on another page.

 

[JimT66]

@JimT66 were you able to confirm if the shroud is threaded 14x1.0mm?

If you make 3d prints, or have someone to make for you, this is the entire free given codes to print it.. the long one, the short version is hardly more quiet than the factory version. Reports are that everyone likes it, and quiets the P-tac immensely. Even for indoor basement shooting

 

[Hvacguy]

If you make 3d prints, or have someone to make for you, this is the entire free given codes to print it.. the long one, the short version is hardly more quiet than the factory version. Reports are that everyone likes it, and quiets the P-tac immensely. Even for indoor basement shooting

That's cool. Can you share a link to the file?