EVOL HPS HPS 30 Models

[Madeintheuk]

The 50.15 never shot well for me. The 44 grain shoot better, but I’ve never had results at 100 like the 33.95. Consistency, bc, accuracy at a wide range of speed. They’re an all round fantastic pellet. I’ll go out on a limb to say the best pellet jsb manufactures.

 

[ctshooter]

The 50.15 never shot well for me. The 44 grain shoot better, but I’ve never had results at 100 like the 33.95. Consistency, bc, accuracy at a wide range of speed. They’re an all round fantastic pellet. I’ll go out on a limb to say the best pellet jsb manufactures.

Still being a bit new to .25 myself, I have had good experience with the 34gr. Are you referring to the MkI or MkII here? Or, just 34gr in general and whichever version your gun shoots better?

I am definitely considering bumping my 15" .22 up to a .25 when available.

 

[CTAirgunner]

Still being a bit new to .25 myself, I have had good experience with the 34gr. Are you referring to the MkI or MkII here? Or, just 34gr in general and whichever version your gun shoots better?

I am definitely considering bumping my 15" .22 up to a .25 when available.

I shot mk1 and mk2 33.95 out of my taipan long, MOA at 115 yards in wind all day long. Right at around 900 fps. I think theyre a really IMO overlooked pellet.

 

[Madeintheuk]

Still being a bit new to .25 myself, I have had good experience with the 34gr. Are you referring to the MkI or MkII here? Or, just 34gr in general and whichever version your gun shoots better?

I am definitely considering bumping my 15" .22 up to a .25 when available.

I never had the chance to shoot mk1, and I’ve noticed like others, than buying mk1 today has mk2 in the mix. The mk2 has done no wrong by me. I’ve shot them from a wildcat mk2, leshiy 2, vet standard, impact, crown, prophet, and a couple more in sure I’m missing. All shot unbelievably well, and anywhere from 850-960fps.

 

[American Air Arms]

@American Air Arms I was curious if there were plans to add a detent to the cocking handle to hold the probe in the rear cocked position to help with mag loading? Sometimes when im trying to load mags into the mini the probe wants to creep forward enough to stop the mag. Not a deal breaker but it would be a very nice addition to an already wonderful pcp.

I'm enjoying my mini very much. Big thanks to @CTAirgunner! I'll definitely be ordering one of those .223s or .257s in the future! Keep up the great work!

Hope everyone is having a great day.

This was a consideration early on. After considering the added complexity and that you would feel the detent every time you cocked the gun with or without a mag it seemed there were too many cons.

It doesn't take long to acquire the muscle memory need. Before long you will not even notice.

 

[CTAirgunner]

@American Air Arms any rough time frame on when the br/prs models with the long barrels will be released? I have dreams of the .223 or .257 im not sure if its healthy haha

 

[Dairyboy]

@American Air Arms any rough time frame on when the br/prs models with the long barrels will be released? I have dreams of the .223 or .257 im not sure if its healthy haha

I don't know if any of us addicted to these airguns are healthy but I'm not to the dreaming part yet

 

[Madeintheuk]

I’m just over here waiting for the new hammer system to hit the shelves

 

[Woogie_man]

I don't know if any of us addicted to these airguns are healthy but I'm not to the dreaming part yet

Its healthy!!! I can quit any time!!

Tom, when can I send you a credit card number for one of the new rifles lol

 

[Dairyboy]

I’m just over here waiting for the new hammer system to hit the shelves

 

[Woogie_man]

Any update? Or will this be a Christmas gift from my wife.....I swear she will know about it. Lol

 

[pan60]

Any update? Or will this be a Christmas gift from my wife.....I swear she will know about it. Lol

my wife also know about it but i think i will be SOL

 

[Woogie_man]

During the wait I am starting to get the bug again for my RC planes. Getting some of my long range planes and things going. They are great ways to scout for new shooting areas. Though cost a bit of money as well......lol

 

[AtlasAirguns]

During the wait I am starting to get the bug again for my RC planes. Getting some of my long range planes and things going. They are great ways to scout for new shooting areas. Though cost a bit of money as well......lol

I used to do RC. Traxxas, Team Associated etc. There are a lot of guys that were in that before airguns. There are a lot of similarities: fine tuning, tinkering, tunes, and yes money. My favorite was the Team Associated B4 right when they started with the Brushless motors. Anyway, I do like airguns more because there are so many good friends we make globally in the sport.

 

[Woogie_man]

Exactly! I met so many people while at NAC, and many I still talk to. The brotherhood/family feel is awesome.

 

[AtlasAirguns]

Exactly! I met so many people while at NAC, and many I still talk to. The brotherhood/family feel is awesome.

99.99% of shooters out there will drop whatever they are doing to help someone out. I wish more sports or society at large were like that. With RC stuff I felt like I would be lucky to meet up with a couple guys and their models typically were not in the same ballpark as mine: either too slow or too fast, or a different scale etc. It seemed more like a open my trunk up and when I'm done drive off, whereas with airguns guys/gals want to talk about their persuit with accuracy and share it - half the time sharing it with their competitors. Anyway enough of my ramblings: hopefully we get an update soonish. Pm me your plane setup

 

[Sound Tribe]

Oh man...I've thinking about what to do for a new long range setup. Great to see these different options with airguns... and the AAA platform has caught my eye from the very start

I love the style of the Evols and the Paradigm looks great too, but a dedicated .223 gun with the new upgrades just sounds so awesome

Can't wait to see it in action! I will be seriously considering one of these

 

[pan60]

i still want to see some pics of the these guns!

 

[EDventure Outdoors]

Are you going to offer the Arca rail as an option on the Hunter model. And what size are the factory plenums on these 3 rifes

I'd be interested in the Arca rail option too.

 

[Slugslinger]

Does anyone know the size or volume of the stock plenum in the standard Evol.30. I wonder what the new HPS .30 comes installed with from Tom