Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Hawke Frontier LRF Laser Rangefinding Binoculars

1759535640545.webp

Before starting this review of Hawke Frontier LRF Laser Rangefinding Binoculars, I probably should give a little personal background…

  • I’ve always been interested in optics, mainly associated with photographic cameras. I value high optical quality. But optical quality is something like accuracy in shooting, it means different things to different people, so I try to quantify it wherever possible.
  • However my experience has mainly been with “single lens systems” – cameras and riflescopes, rather than binocular “twin lens systems”.

So that’s my background to this review. What did I find?

HAM-Hawke-5-8128181.jpg



Hawke Frontier LRF Laser Rangefinding Binoculars – Product Overview​


Hawke Frontier LRF Laser Rangefinding Binoculars are available in two configurations. There’s a 10 x 42 (10 x magnification, 42 mm objective diameter) and a 8 x 42 model.

We’re looking here at the 8 x 42 version. Why the lower magnification? Well, firstly it’s because 8 X magnification is easier to hold still than 10 X (we all know this from our experience with riflescopes). And “still” is an important practical component of achieving a sharp view…

Secondly, the 8 X magnification has a broader Field of View than the 10 X model. In fact, the specifications are for a 393 Feet FoV at 100 Yards. That’s 25% more than the higher-magnification model.

Hawke Frontier LRF Laser Rangefinding Binoculars


If you’re “glassing” the terrain, more power is not always better, but the wider FoV gives you the chance to spot something at the edges that might escape the narrower 10 X view. Plus – if you’re using these laser range finding binoculars for hunting – the scope on your air rifle probably gives you a (much?) higher magnification for sighting-in on the target.

Thirdly, optical theory and personal experience indicate that – all other things being equal – for a certain diameter objective (front) lens, a lower magnification will provide a brighter image than higher. That could be critical for viewing in low light conditions, in deep shade or at dusk.

HAM-Hawke-10-2612221.jpg


But these are not just binoculars, they include a laser rangefinder. In fact, the rangefinder displays in the right eyepiece but you’re not aware of that in normal use. It’s just “there”, when requested, in the image you see – apparently – with both eyes.

As with other laser rangefinders, this one has a number of modes of operation. It can also display distances in Yards or Metres, at your choice. It’s also adjustable for brightness, as you would expect.

For this review, I set the mode to “Hunt”. This measures the straight line distance to the target, ignoring distractions such as long grass or brush. In addition, it also displays a second range – the horizontal distance – to accommodate for the near-certainty that your target is not at precisely the same elevation as you.

I’ve labeled the display points in this version of the photograph below.

Hawke Frontier LRF Laser Rangefinding Binoculars


Incidentally, I took this photograph using my iPhone and the Hawke Smartphone Spotting Scope Adapter. The image was much zoomed-in using Photoshop for display here.

At 2 Lbs 2 Oz weight, these binoculars are not exactly light – but they are about 2 Oz lighter than the 10 X model – hey, another benefit!

However that weight indicates the use of a considerable amount of high quality optical glass, plus a really solid magnesium alloy chassis. It certainly gives an immediate impression of solidity and robustness.

The “straight through” design indicates that these binoculars use a roof prism image erector system. That helps give a compact size (6 1/2 Inches length) and high quality image, at the expense of some additional weight. If you look in through the objective lens – with the laser rangefinder OFF! – you can see something of that optical system design.


Hawke Frontier LRF Laser Rangefinding Binoculars – What’s Included?​


As with all Hawke products, these binoculars are well-packaged and comprehensively-equipped. Among the accessories included are front and rear eyecups, a battery (for the rangefinder), neck strap, padded carrying case and comprehensive harness for carrying the case.

HAM-Hawke-13-8233591.jpg


Interestingly, there’s also a quality control inspection document. This is serial-numbered to the unit and confirms the optical and mechanical checks that it has passed.

Incidentally, the “Strehl Ratio” is a measure of image quality that’s not commonly discussed in consumer optics. You can read more about it here. To me, that shows that Hawke takes its optics seriously…

HAM-Hawke-12-9567280.jpg


Rangefinder controls are very simple. There’s a “power” button that turns-on the laser rangefinder. The rangefinder automatically cuts-out after 15 seconds, so button-pushing is minimized. There’s also a “M” (Mode) button that’s used in the setup.

That’s all.

Our binoculars are rubber-armored, have water-repellant coating on the lenses and are IPX7-rated. That means that they are specified to withstand immersion in water to a depth of 1 Meter for up to 30 minutes. (I’m satisfied that they’re good for all weather use, even if I didn’t actually try an immersion test myself!)


Hawke Frontier LRF Laser Rangefinding Binoculars – Subjective Testing​


First, I set-up the binoculars for my specific eyesight in the recommended way by using the diopter correction controls on the eyepieces. (Hawke describes this simply but well on page 5 of the user guide.)

Doing this, I was impressed with the click adjustment mechanism of the eyepieces. This allows for easy rotation of the eyepieces for setting, yet makes your chosen setting more difficult to dislodge during everyday handling. It also has a very pleasing tactile effect.

As shown in the photograph below, the built-in eyecups can be extended (left) for use with normal eyesight. The pushed-in position (right) is for spectacle-wearers, such as myself.

These eyecups rotate in and out using a helical thread that – again – allows for easy setting but limits inadvertent changes.

HAM-Hawke-3-1712047.jpg


The control buttons are well-placed and easy to use. Ditto for the focusing wheel that’s ideally-placed for operation by the index finger. However I would have liked to see deeper ridging on the surface to facilitate use in inclement weather.

After several prolonged periods of glassing, I noted the following observations…

Brightness. The image seen through the binoculars appeared brighter than observed with the naked eye. This was particularly apparent in deep shade and at dusk. This made it possible to pick-up details that I otherwise could not see under such conditions. Here, of course, is a critical advantage for hunters.

High contrast. The images were sharp and detailed – as well as bright. They were definitely not washed-out and “dingy”. That’s the result of insufficient optical contrast that can be seen in low quality optics.

Resolution. The observable level of detail also seemed very high, whatever the subject. Although our natural tendency is to concentrate on the center of the image, I found that an impressive detail capability extended out to the edges of the field. (This impression is quantified by our structured testing, below).

Hawke Frontier LRF Laser Rangefinding Binoculars


Color correction. Neutral. Subjects appeared to be the same color when viewed through the binoculars as to my naked (plus spectacles) eyes, too. And I saw no color fringing – those “halos” of many colors – that can be produced by optical imperfections in poor quality optics.

Distortion. When looking deliberately at straight lines – fence posts and similar – straight lines really did look straight – even at the edges of the field. There was no sign that I could detect of either “barrel” or “pincushion” distortion, the optical defects that causes straight lines to look curved.

HAM-Hawke-1-2371725.jpg


But for me, the most impressive aspect of the optical performance was the ability of these binoculars to impart a dramatic three-dimensional look to the world.

When I focused – for example – on one tree trunk in a woodland, that specific tree really “popped” out from the others around it that were just slightly less in focus.

Yes, I’ve seen this effect other binoculars, but rarely in such a pronounced manner. The result is that the subject you focus on “pops” clear of the background, making it easy to determine the range and study in detail.


Hawke Frontier LRF Laser Rangefinding Binoculars – Structured Rangefinding Test​


Hawke specs indicate a rangefinding accuracy of +/- 1 Meter. This is a common specification. That’s good for long ranges – say 100 Yards plus. However, it’s not inspiring for shorter range airgun use.

The good news is that I found that the distance measurements produced by these binoculars to be much more precise than the specifications suggest.

The distances called-out by the Hawke LRF binoculars I tested very closely matched those displayed by other laser rangefinders out to 140 Yards. At short ranges they matched the results from a good, old-fashioned measuring tape, too!

These binoculars focus closer than the minimum rangefinding distance. However I was able to obtain accurate rangefinding distance measurements as close as 13.7 Yards (41 Feet).

HAM-Hawke-14-3407553.jpg


But I will make a comment about rangefinding here…

Initially, I was producing wildly-different distance readings on trees in distant woodland. However I realized soon enough that this was the result of operator error!

It transpired that I had a tendency to move slightly as I pressed the rangefinding button. That means that I ended-up recording the distance of a different tree. Hence the difference.

The learning is to hold the binoculars very still when rangefinding so as to ensure that they are pointed exactly at the subject you want – not where you think they should be…


Hawke Frontier LRF Laser Rangefinding Binoculars – Structured Optical Test​


Subjective optical testing is all well and good. But it depends on the individual person making the test. In this case me!

So I set-up the Frontier LRF binoculars at 20 Yards – checked by the rangefinder and tape – from our Hard Air Magazine resolution test target.

This test target has four USAF test targets towards the center, as you can see below.

Hawke Frontier LRF Laser Rangefinding Binoculars


USAF resolution test targets are widely used in the optics industry. You can read more about them here if interested. They are specifically designed for the assessment of image resolution by combining many different-sized blocks of different thickness lines. Each block on our target is 1 7/8 Inches wide.

The smallest pair of lines that you can “read” as separate bars represents the resolution. So, the smaller the sub-blocks, the higher the resolution. Simple!

Of course, all these readings depended on the optical capabilities of my own eye, plus glasses. Your mileage may vary with this type of testing, for obvious reasons.

So what did I find?

Well, I was able to resolve the blocks as indicated in the photograph above. For red, blue and black, the individual lines of each block are just 44 Thou (0.044 Inch) wide. I would describe that as an excellent result at 20 Yards!

The width of the yellow lines was slightly larger, at 62 Thou (0.062 Inch). It’s common in my experience for the yellow lines to be less visible, largely due to the lower contrast with the white background. Again, I would describe that as excellent resolution.

Now it’s important to say that this test was run in bright, afternoon daylight with the target in light shadow, as seen in the photograph above. The results will be less good under lower illumination levels.


Hawke Frontier LRF Laser Rangefinding Binoculars – Summary And Conclusions​


Given the relatively low powers and limited ballistics of most air rifles, accurate range estimation is a must for accurate shooting. We all know this!

These Hawke x 42 rangefinder binoculars are suitable for use at any practical airgun hunting range and will undoubtedly help your downrange hit rate.

At not much more than 2 Lbs weight, these binoculars are also significantly lighter than any air rifle plus scope combination. This – plus the much wider field of view – makes it so much easier to survey the scene for an extended period of time than using a riflescope.

Sure, rangefinding binoculars are yet one more item to carry in the field. But they are sure to be an essential item for a successful hunt, for both finding and ranging your quarry.

Everything about these Hawke binoculars indicates that they are quality product, capable of giving many years of service. At a MSRP of $999.00, they are well priced too, for what they offer.

Even more so if you buy from Pyramyd where you’ll find them for $100 less at $899.99.

BUY FROM PYRAMYD​

Hawke Frontier LRF 1800 8×42 Binocular OLED Green
image-100159921-13713383


The post Hawke Frontier LRF Laser Rangefinding Binoculars appeared first on Hard Air Magazine.
 
Hawke Frontier ED X 8x42 binoculars are one of the best deals going for a few years now. I spent about a half hour with a pair comparing them against my 25 year old Leica 8x32 trinovids and I had to admit that the new coatings of the Hawke bested the Leica. I was more than a little stunned by just how good the Hawkes were, especially for the price. I don't know if these range finding versions have the ED X lenses, but if you are just looking for a really good pair of binoculars, you can't go wrong. Real world prices for the ED X is $469, and for the Frontier HD it's $230, the LRF is $900.
Now the LRF does not say that they use ED X glass, so I would assume that they do not, which means you are paying a lot for the range finder because the base binocular is pretty inexpensive. Not having a pair of ED X Frontiers to compare them against, I'm sure the the view would still look great compared against most range finders, but the ED X view is really something to behold, even against top end glass. So the question is, how much of a premium are you willing to pay for the range finder with a binocular view? If the binocular view is what you want to use mostly, do yourself a favor and get the ED X and buy a separate $100 range finder.
 
Hawke Frontier ED X 8x42 binoculars are one of the best deals going for a few years now. I spent about a half hour with a pair comparing them against my 25 year old Leica 8x32 trinovids and I had to admit that the new coatings of the Hawke bested the Leica. I was more than a little stunned by just how good the Hawkes were, especially for the price. I don't know if these range finding versions have the ED X lenses, but if you are just looking for a really good pair of binoculars, you can't go wrong. Real world prices for the ED X is $469, and for the Frontier HD it's $230, the LRF is $900.
Now the LRF does not say that they use ED X glass, so I would assume that they do not, which means you are paying a lot for the range finder because the base binocular is pretty inexpensive. Not having a pair of ED X Frontiers to compare them against, I'm sure the the view would still look great compared against most range finders, but the ED X view is really something to behold, even against top end glass. So the question is, how much of a premium are you willing to pay for the range finder with a binocular view? If the binocular view is what you want to use mostly, do yourself a favor and get the ED X and buy a separate $100 range finder.

I'm thinking about buying the Vortex Optics Diamondback HD 2000 Laser Rangefinder. Do you know anything about it? My binoculars are cheap Chinese ones and need to be replaced. Maybe a combo range finder and binoculars would work? Any member feedback would be appreciated.
 
I love the fact that the inspection document was included. That tells me someone is paying attention and cares enough to convey that. I own two Hawke scopes and pretty much satisfied with their performance. The one caveat was the reticle on the more expensive was weak, but that may have been my mistake for not going with the more expensive FFP unit; live and learn I guess, but dam, it was expensive anyway! When spending $600 for a scope I have a tendency not to experiment with another brand and they have been a solid product. Pretty sure the binos are solid.
 
I'm thinking about buying the Vortex Optics Diamondback HD 2000 Laser Rangefinder. Do you know anything about it? My binoculars are cheap Chinese ones and need to be replaced. Maybe a combo range finder and binoculars would work? Any member feedback would be appreciated.
A friend has one and I have used it. It is a good range finder. The nice thing about Vortex is the warranty, so they are a safe buy. If you are a dusk to dawn hunter you will really appreciate the L.E.D. display, I really like that feature. I think the combo units are only a good deal when the range finder matches the optics and the price reflects the quality of both. I don't think that's happening with the Hawkes in this article. For under $500 binoculars though, the Hawke Frontier ED X beat any Vortex that are at the same price point on image quality to me. Vortex has one of the best warranty policies around so if you think you'll need it, only then is it a coin toss.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top