3D printers for airgun parts??

[Firewalker]

I ordered the same setup its getting delivered thursday, seems like a big improvement over my Vyper.
You must have done the founders deal they did from jan 2 to the 12th

Yupper! Good price, about 1/2 the price of the same printer Bambu offers.

It will be my PETG dedicated printer. The Ender will continue to sling PLA.

 

[Woogie_man]

A Shroud for the rapid mk2. With the bottle so close it was a challenge to get things correct. Working on the final piece to make it solid.

Thinking of burlap, cotton wool, or something else stuffed in the sections. Will end up gluing all together once happy.

 

[Firewalker]

Great idea!

 

[Firewalker]

SWMBO called me asking if this was ok....

 

[pan60]

SWMBO called me asking if this was ok....

oaky can we define what SWMBO means?

 

[elwoodblues]

She who must be obeyed
Hey wheres the sauce for that spagetti

 

[Woogie_man]

Well just tested the unit and it is stupid quiet! Going to add material inside the units, and I have to modify the end unit, but as it sits I am happy.

Was worried that the exit hole at .250 would be to tight being 5" from the muzzle......but zero issue. No clipping or marks on the plastic. The test was with the final addition empty with no baffles or anything, just an end cap.

 

[elwoodblues]

The Kobra S1 is here and printing have some ASA going right now reprinting the subscriber Plume for Air venturi avenger, the PLA+ that I did the original on the Vyper is doing fine but the ASA is supposed to be better for outdoor use, we shall see

 

[Woogie_man]

Have been attempting to get some LW-PLA to print for my other hobby. But man is this stuff a pain in the butt

 

[elwoodblues]

LW-PLA ?? never heard of it, the ASA bed temp 100c head temp 260c wow thats hot I dont ever turn my oven that hot 500f

 

[Firewalker]

The Kobra S1 is here and printing have some ASA going right now reprinting the subscriber Plume for Air venturi avenger, the PLA+ that I did the original on the Vyper is doing fine but the ASA is supposed to be better for outdoor use, we shall see

Any issues with the printer? My copy got delayed, I hope it ships this week.

 

[Woogie_man]

LW-PLA ?? never heard of it, the ASA bed temp 100c head temp 260c wow thats hot I dont ever turn my oven that hot 500f

It is a foaming type of filament for rc planes.

 

[Firewalker]

It is a foaming type of filament for rc planes.

Speaking of TC planes, Orca slicer just went Beta with thier 2D wing settings for the lightest infill ever!

I'll print a wing when the S1 arrives to see what the weight ends up as.

 

[elwoodblues]

The only issues I've had with the printer is getting it found on my network, I have it out in my shop so its remote print and not a strong wireless signal. So far the prints have been excellent.

 

[Woogie_man]

This project is finished and ready for the next one!

 

[Non Timebo Mala]

The only issues I've had with the printer is getting it found on my network, I have it out in my shop so its remote print and not a strong wireless signal. So far the prints have been excellent.

Here is an ancient web page I built to help college kids with links between dorms back around 2004, something like that. These little corner reflectors and the eazy surfer were quite popular back in the day. If your wireless devices have antennas they will easily double your signal strength. That makes the link more reliable and/or faster. Put one at each end for an additional boost.

Suppose you don't have antennas? Sit the remote AP in the corner of a card board box lined with tin foil. You'll be surprised.

www.freeantennas.com