Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And “crickets “ on how the Marksman did?Well i have hammers headed my way from everyone now. Fx just sent me a bill and then sent tracking from cali. Shot a bunch of different weight zan today all shot pretty well. Shot some 40 gr air marksman today to 850 fps on current tune.
Yea ya know even the expensive fx guns have trouble pushing the 40 to real high velocity. I would say that it depends on what your looking for. Want a light accurate slug slinger for 200 yds and less that handles like a 22 lr its your ticket. Want to try to push 40 grain over 1000 fps get a m4 that is heavier and more compact. But remember a40 gr at 1000 has .4 wind drift at 100 yds with a 2 mph breeze. The 33 in the same wind at 905 fps has .6 drift is it really worth a heavier gun that costs almost twice as much shoting more expensive ammo to gain .2 in a 2 mph breeze? In a 10 mph wind its 3.6 for the 33 2.4 for the 40. Thats up to you but for me and where i live 100 yds is a long shot cause of trees etc. so im good with it.That’s disappointing. So much for 40 grains. How do you like it otherwise? Recommend, Keeper, or okay?
Their numbers are from using the gun with the slug power kit and the SHP plenum.. so you are correct it’s not the stock gun.In stock form. I believe they are exaggerating. here's a picture I posted of the standard Dynamic port next to a Huma full flow port and the difference is big.
Anyways, I believe their numbers are based on using all of their potential parts and not the stock ones. Even in my Dynamic I am limited to setting the reg to about 160b unless I want to put in a heavier spring or hammer. They make them, but I don't want to use them. As it stands I do have my gun doing what they claim it can do, but I only got there with aftermarket parts and right up there settings.
I got your numbers wrong when I calculated your power, with the 33s you were getting 62.7fpe. Regardless, way less than 79. I wonder if they don't maximize everything in the system before calculating their numbers? It seems to me they do. Though, like I said, I doubt their numbers are achievable in stock form.
Every person has said that the tungsten hammers will beat up your gun. I don't know why they make them if that's the case, but everyone that talks about hammers says not to use them in anything but the Impacts I guess.Their numbers are from using the gun with the slug power kit and the SHP plenum.. so you are correct it’s not the stock gun.
But the SHP plenum is only 63cc vs 53cc so one should be able to get close to those listed numbers with the slug power kit. Maybe even just the tungsten hammer?
That’s good to know! Because I just ordered my .30 cal DRS MK2 700mm.Every person has said that the tungsten hammers will beat up your gun. I don't know why they make them if that's the case, but everyone that talks about hammers says not to use them in anything but the Impacts I guess.
That’s very good to know! Where did you find the sleeve? I’ve been looking for one and they show sold out everywhere.Ok so I haven’t posted about this for a bit. Things started out pretty good then accuracy with slugs especially went south was still pretty good with pellets though. I had been playing with hammers and hammer springs and just wasn’t finding any appreciable results while keeping the reg in the 125-130 zone then i pulled the barrel to see if it was a 1-16 heavy which it was and slug accuracy went to. Put a 700 mm carbon sleeve in and everything is rosey! Shooting many slugs now accurately.
I called Utah airguns and they told me that yes it’s possible. Specifically a Dynamic/Panthera attachment. I’m waiting to actually my hands on it before I make any final conclusions of course.@Cantona256 Hpp has a couple 700 mm carbon sleeve left i think. Haven’t puled the barrel completely yet so no pin probe. Check the length of the 580 bottle before you buy it might make your length of pull too long as it seems most use a 480.
Are you sure that works? Looking at pics the bottle gun doesn’t have a hammer adjuster i think.
What ever works just wanted to make sure you knew what your getting intoI called Utah airguns and they told me that yes it’s possible. Specifically a Dynamic/Panthera attachment. I’m waiting to actually my hands on it before I make any final conclusions of course.
I did see in another video someone said all the DRS MK2 blocks come with the channel to receive air from the back. I’m trying to remember which one it is but I’m at work so it’ll have to wait.
We use essential cookies to make this site work, and optional cookies to enhance your experience.