Others New drs tactical mk2

[Solo1]

Well i have hammers headed my way from everyone now. Fx just sent me a bill and then sent tracking from cali. Shot a bunch of different weight zan today all shot pretty well. Shot some 40 gr air marksman today to 850 fps on current tune.

 

[Billm]

Well i have hammers headed my way from everyone now. Fx just sent me a bill and then sent tracking from cali. Shot a bunch of different weight zan today all shot pretty well. Shot some 40 gr air marksman today to 850 fps on current tune.

And “crickets “ on how the Marksman did?

 

[Solo1]

Oh i didn’t shoot them outside shot inside to get muzzle velocity. Want to see what the hammers are going to do. Im hoping to get 33 to 950 and the 40 to 900. The 40’s are a pain to load they are as long as the opening so i have to take my single shot loader out load it while closed and put it back in to be able to shoot them. If i get them to 900 though that would be almost 72 fpe which i think is all you could get without going to that tungsten hammer and 170 or so bar and beat up the valve.

 

[Solo1]

Oh i made a boo boo on shot count i must have added air when i got that shot count of 40. I just did it again and its 30 shots to a fill on current settings. And the mki spring is not needed for 125 bar. We will see what a 12 gram hammer does with this tune.

 

[Solo1]

Well got hammers and springs. Tried some changes up to 135 bar 12 and 13 gr hammer and a shorter stiffer hammer spring and had a total gain of 10-15 fps which i didn’t feel was really worth lower shot count so im back to where i was 33 at 900. Oh well

 

[RobbieGio]

That’s disappointing. So much for 40 grains. How do you like it otherwise? Recommend, Keeper, or okay?

 

[Solo1]

That’s disappointing. So much for 40 grains. How do you like it otherwise? Recommend, Keeper, or okay?

Yea ya know even the expensive fx guns have trouble pushing the 40 to real high velocity. I would say that it depends on what your looking for. Want a light accurate slug slinger for 200 yds and less that handles like a 22 lr its your ticket. Want to try to push 40 grain over 1000 fps get a m4 that is heavier and more compact. But remember a40 gr at 1000 has .4 wind drift at 100 yds with a 2 mph breeze. The 33 in the same wind at 905 fps has .6 drift is it really worth a heavier gun that costs almost twice as much shoting more expensive ammo to gain .2 in a 2 mph breeze? In a 10 mph wind its 3.6 for the 33 2.4 for the 40. Thats up to you but for me and where i live 100 yds is a long shot cause of trees etc. so im good with it.
Oh just so you know the 40 at 850 FPS in 2 mph drifts .3 at 100
You have to remember too that you don’t always get advertised bc. Im usind 1.2 for the 33 and .2 for the 40 and the new zan boat tail hollow point 33 claims .17 at 930 fps. I just got some but only shot for velocity which is same as air marksman.

 

[Solo1]

You have to remember all the you tubers are trying to sell new guns and if you want to give your cash away every year on a new gun the only person that can stop you is you——or your wife!

As pumacarl has found hes shooting h&n as they have a decent bc and shoot well. Not always does the highest bc slug shoot well out of a particular gun

 

[Solo1]

Bc is funny too this is for a Remington

55gr FMJ (M193)​

• Muzzle Velocity: 3240 fps
• BC (G1): 0.255
• Use: Training & general purpose

This is just to keep things real

 

[Solo1]

Something else i should mention. I originally went for the tactical because of how solidly it was built and it had a larger plenum than the classic, there wasno extra chassis to buy or anything else for that matter i did add a stock for better use from bench. It was also half the price of the cheapest blackwolf and now that i have 2 i have probably 90 % of what the bw can do with 2 barrels! Mine are set no need to make changes. 1 for squirrels and 1 for playing at long shots. I think thats better

 

[RobbieGio]

Food for thought. Thank you for the knowledge. I was thinking of the Tactical with the bottle or Redline and add the larger plenum. Like you say, trying to sling 40 grain slugs on hopes and dreams is not worth it over good and great 33 grainers.

Moot point, anyway. Currently back ordered.

 

[Solo1]

Ya its easy to get caught up in this stuff since things have really changed the last couple years. I believe the classic now has the same size plenum but you don’t get a arca rail. If you don’t mind your face on the bottle that should give a big shot count and decent power.

 

[Cantona256]

In stock form. I believe they are exaggerating. here's a picture I posted of the standard Dynamic port next to a Huma full flow port and the difference is big.

https://community.hardairmagazine.com/attachments/largerports-webp.19934/

Anyways, I believe their numbers are based on using all of their potential parts and not the stock ones. Even in my Dynamic I am limited to setting the reg to about 160b unless I want to put in a heavier spring or hammer. They make them, but I don't want to use them. As it stands I do have my gun doing what they claim it can do, but I only got there with aftermarket parts and right up there settings.

I got your numbers wrong when I calculated your power, with the 33s you were getting 62.7fpe. Regardless, way less than 79. I wonder if they don't maximize everything in the system before calculating their numbers? It seems to me they do. Though, like I said, I doubt their numbers are achievable in stock form.

Their numbers are from using the gun with the slug power kit and the SHP plenum.. so you are correct it’s not the stock gun.

But the SHP plenum is only 63cc vs 53cc so one should be able to get close to those listed numbers with the slug power kit. Maybe even just the tungsten hammer?

 

[Pumacarl]

Their numbers are from using the gun with the slug power kit and the SHP plenum.. so you are correct it’s not the stock gun.

But the SHP plenum is only 63cc vs 53cc so one should be able to get close to those listed numbers with the slug power kit. Maybe even just the tungsten hammer?

Every person has said that the tungsten hammers will beat up your gun. I don't know why they make them if that's the case, but everyone that talks about hammers says not to use them in anything but the Impacts I guess.

 

[Cantona256]

Every person has said that the tungsten hammers will beat up your gun. I don't know why they make them if that's the case, but everyone that talks about hammers says not to use them in anything but the Impacts I guess.

That’s good to know! Because I just ordered my .30 cal DRS MK2 700mm.