What'cha doing air gun related today?

[Florida_Man]

Now I’m watching the southern flying squirrels and making sure I’m ready if a rat shows up.

 

[Florida_Man]

I took out a bird feeder invader this morning with my P35 25 cal, way overkill.

I set up my PP750 to see how many shots I get a fill. I got 30 rounds in during my break.

 

[PapaT]

Received my PA order, discovered a secret 4th shipment associated with that part of the order, and separated out my Avenger related items from the order for my wife to hide until my birthday. Then I took some practice shots with my 3622, 25yds with irons, at my new atfl target during a break in the rain. Also brought home target printouts for st patty challenge. Feels like a great airgun day!

 

[Dogowski]

Received my PA order, discovered a secret 4th shipment associated with that part of the order, and separated out my Avenger related items from the order for my wife to hide until my birthday. Then I took some practice shots with my 3622, 25yds with irons, at my new atfl target during a break in the rain. Also brought home target printouts for st patty challenge. Feels like a great airgun day!

It's like Christmas in February PapaT. I love opening presents!

 

[Danman]

My Pic/Arca rail clamp came in. That was fast...While testing it on the Ghost for fitment I noticed my Reg creeped up! Was 165Bar when I got it, now it appears to be 175. Last week after destroying my old phone I did some grouping @ 50Y with it and it was pretty bad. Hmm might have been running too hot

 

[Soren Drost]

I am off to Birmingham from Denmark attending the British Shooting Show 2025

Looking so much forward to the reveal of the new platform Daystate BlackWolf

 

[PapaT]

I am off to Birmingham from Denmark attending the British Shooting Show 2025

Looking so much forward to the reveal of the new platform Daystate BlackWolf

View attachment 11473

You can visit nate and check out his new products too. Have fun at BSS

 

[FL22]

I am off to Birmingham from Denmark attending the British Shooting Show 2025

Looking so much forward to the reveal of the new platform Daystate BlackWolf

View attachment 11473

I’d take that over some beef jerky any day .

 

[Elexious Musick]

Rebuilding a Crosman 150 with parts from Mike Baker of Arizona. These guns and parts are getting harder to find. Does anyone know where to find a complete hammer assembly for one?

 

[Florida_Man]

Took my PP750 completely apart. cleaned everything of factory lubricants. Drilled all air paths to 3.5mm. Filed and de-bur all internals. Installed a 3D printed cocking handle. Increased reg to 1600psi, trying to find the right HS setting.

 

[Dogowski]

Took my PP750 completely apart. cleaned everything of factory lubricants. Drilled all air paths to 3.5mm. Filed and de-bur all internals. Installed a 3D printed cocking handle. Increased reg to 1600psi, trying to find the right HS setting.

I've got the aluminum cocking handle coming in today for my Notos. Is it a hard process installing these handles? I just got the peek poppet installed two days ago from Maple Products and now will have to tear it down again. Part of the fun for me is working on them too. I'll have to find a youtube video showing the process. Any tips are appreciated!

 

[Florida_Man]

I've got the aluminum cocking handle coming in today for my Notos. Is it a hard process installing these handles? I just got the peek poppet installed two days ago from Maple Products and now will have to tear it down again. Part of the fun for me is working on them too. I'll have to find a youtube video showing the process. Any tips are appreciated!

Well since you already had it apart, the pins should be easier to get out. Pin 33 gets pushed out the top, that free’s the linkage at the rear. I think it’s pin 71 in this diagram is the tough one that is the front pivot point of the linkage. I found a wood board the same height as the receiver on the table and had to knock it hard to free that pin. It comes out by hitting the bottom side with a punch. I removed part 44 and the spring, but I don’t think I had to. If you do it allows the probe to move around free.

I have the metal one coming for my Notos.

 

[Dogowski]

Well since you already had it apart, the pins should be easier to get out. Pin 33 gets pushed out the top, that free’s the linkage at the rear. I think it’s pin 71 in this diagram is the tough one that is the front pivot point of the linkage. I found a wood board the same height as the receiver on the table and had to knock it hard to free that pin. It comes out by hitting the bottom side with a punch. I removed part 44 and the spring, but I don’t think I had to. If you do it allows the probe to move around free.

I have the metal one coming for my Notos.

Just went to the mailbox and mine is here. I appreciate the tips and im going to install it this weekend. I found the Maple Products install video for the PP750 plastic one they print so that helps too. Thanks again!

 

[Florida_Man]

Just went to the mailbox and mine is here. I appreciate the tips and im going to install it this weekend. I found the Maple Products install video for the PP750 plastic one they print so that helps too. Thanks again!

That’s the one i put on my pp750. It’s very sturdy

 

[Florida_Man]

I have a 3 day weekend, so i took off a target scope and put on a all purpose Discovery fixed 6x. With any luck an agama or rodent will show up this weekend.

 

[Florida_Man]

Look at the other side.

 

[Scriv]

Ordered Daystate's new Black Wolf.

 

[pan60]

View attachment 11473

all I can think about is the coffee and cake : )

 

[FL22]

I finally broke down and purchased a replacement barrel ($75) for my BSA Meteor Super .

Hopefully I’ll get the replacement by next week, I went ahead with disassembly just in case there were further complications…

You live, you learn, you Airgun .

 

[Florida_Man]

I finally broke down and purchased a replacement barrel ($75) for my BSA Meteor Super .

Hopefully I’ll get the replacement by next week, I went ahead with disassembly just in case there were further complications…

You live, you learn, you Airgun .

View attachment 11509

What was wrong with the old barrel?