Florida_Man
Master HAMster
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What'cha doing air gun related today?
- Thread starter Hateful McNasty
- Start date
- Latest activity Latest activity:
- Replies 4K
- Views 347K
Farmplinker2
HAM Wizard
Late to post, ordered a Cometa 300 with tune from Keystone.
Florida_Man
Master HAMster
Danman
Grand HAMster
German engineering...not just for cars...lol I hate working on German cars
Are they copper coated then @Florida_Man ? I have some coated .22 H&N baracudas (possibly both made by H&N in same factory!?) Thet hit hard but I just use for plinking, not accurate enough for anything else in either of my guns. And I still wonder if they could damage a barrel over time
Farmplinker2
HAM Wizard
Looked at some emails from manufacturers and PA, nothing else.
Florida_Man
Master HAMster
one less rodent in the world. It’s what the atomic was built for. Unfortunately I forgot to press record on the pard.
Nice! I hate rodents.
Took advantage of the Reg going out on my Airacuda Max .30. Topped it off, and shot a good string over the Chrony. Started at 3500 psi and shot to 1900 psi. Kept an eye on the pressure as I went. You can tell where the hammer spring finally overcame the valve. Seemed to be peek right around 2300 psi.
Danman
Grand HAMster
Yikes that's quite a spread, time to fix the reg
I saw they came out with some new stocks for the JTS guns as well @ shotshow.
No lie! Good news is I know EXACTLY where to set the reg for ALL the POWAH!!!! I need to look that up. The stock is the only thing I dislike.Yikes that's quite a spread, time to fix the reg
I saw they came out with some new stocks for the JTS guns as well @ shotshow.
Soren Drost
HAM Expert
Out testing factory setups with my good friend in the Delta Wolf and also shooting with my Red Wolf GP 
That’s insane. Especially in a .177.Out testing factory setups with my good friend in the Delta Wolf and also shooting with my Red Wolf GP
View attachment 11269
Way to go Soren. Excellent groups as usual sir!Out testing factory setups with my good friend in the Delta Wolf and also shooting with my Red Wolf GP
View attachment 11269
Stripped the Airacuda Max down to investigate the Reg. O rings looked fine. Seemed like the reg adjustment screw walked itself out. Tightened it to snug, backed it off one full turn, aired it up and….. like 400 PSI on the reg. lol. De-gassed, disassembled, cussed, 1 more full turn and…… went all the way to 3000 psi and I stopped airing it up. Cussed… Degassed, disassembled, backed it off 1/2 turn (1-1/2 turns from snug) and…… 2400 PSI on the reg, 3500 in the tube. Been holding for an hour now. I wanted 2300, but, I’m gonna let it ride for now. Put it over the Chrony again and see what it does.
Scriv
Master HAMster
Went out and smacked the steel around a bit with the Ghost, and Red Wolf. Been awhile since I shot the Red Wolf. It was good.
Florida_Man
Master HAMster
I have two Notos and one PP750. I also have three drop blocks and 2 CF bottles( 220 and 360)
I have two aliexpress regs, and a Huben Notos dream i bought from Haj. One reg I al going to work on clocking, one I sent to Wes with my Part 66 for him to clock, and I have the Notos dream to work with in the interim. The notos dream will eventually land on a Notos project because it has a built in plenum.
The PP750 is the rifle I am running the notos valve on now until hopefully I can clock the aliexpress correctly, or I get one back from Wes haha. The 177 PP750 doesnt need the plenum size, and I want it to be very compact in the end, so this reg won't stay on it.
Today I tuned the reg to the factory setting of 1400 psi and attached the 220 bottle and filled to 4500 psi. I took 54 shots and still have 2500 psi in the bottle. I ran through all my 3d printed mags, two 15rd Carm and two 12rd Maple.
I started with a Huma mod 30 22 cal 4 baffle sets, my groups tightened when I changed to a Tatsu.
I have two aliexpress regs, and a Huben Notos dream i bought from Haj. One reg I al going to work on clocking, one I sent to Wes with my Part 66 for him to clock, and I have the Notos dream to work with in the interim. The notos dream will eventually land on a Notos project because it has a built in plenum.
The PP750 is the rifle I am running the notos valve on now until hopefully I can clock the aliexpress correctly, or I get one back from Wes haha. The 177 PP750 doesnt need the plenum size, and I want it to be very compact in the end, so this reg won't stay on it.
Today I tuned the reg to the factory setting of 1400 psi and attached the 220 bottle and filled to 4500 psi. I took 54 shots and still have 2500 psi in the bottle. I ran through all my 3d printed mags, two 15rd Carm and two 12rd Maple.
I started with a Huma mod 30 22 cal 4 baffle sets, my groups tightened when I changed to a Tatsu.
Attachments
Florida_Man
Master HAMster
So I’ve commented in the past that when I bought a Notos, I didn’t feel a real attachment to it. I bought it to take the place of my beloved PP700SA.
That is not the case with the 177 PP750. Crazy how just caliber change can change an attitude.
That is not the case with the 177 PP750. Crazy how just caliber change can change an attitude.
I remember you saying that your Notos didn’t have a soul or something to that effect. Good to hear you’re happy with the PP750 in .177
Florida_Man
Master HAMster
I adjusted the reg, filled to 4500, and shot about 100 pellets with my PP750 177
Recorded the 100 pellets with Labradar LX.
I also compared SST to Carm 15rd and Maple 12rd mags. I didn’t see a difference in the front rest only shooting I did. I will do it again on a double rest. I have the trigger adjusted down to the minimum that allows cocking and the safety to work. It will stay there as long as I’m just doing 10m indoor bench shooting.
it’s putting out about 9-10 fpe right now with 10 and 8 gr pellets.
Recorded the 100 pellets with Labradar LX.
I also compared SST to Carm 15rd and Maple 12rd mags. I didn’t see a difference in the front rest only shooting I did. I will do it again on a double rest. I have the trigger adjusted down to the minimum that allows cocking and the safety to work. It will stay there as long as I’m just doing 10m indoor bench shooting.
it’s putting out about 9-10 fpe right now with 10 and 8 gr pellets.
Attachments
Looks mean man. I like the way you have it set up!
Create an account or login to comment
You must be a member in order to leave a comment
Create FREE account
Create a FREE account on our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
