Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

What'cha doing air gun related today?

I didn't mean I could not slow them down. I meant I had no idea how fast they were going at that point. I wanted a speed of around 940 but had no idea when I reached that because the chronograph was not giving me the correct readings. I kept letting the pressure drop all the way to 1500psi and the pellets dropped a couple of inches and were all over the place while the chronograph still was reading over 1050fps at that point I was sure I could no longer trust the chronograph and filled it back up to 2700psi and it started shooting good again but I have no idea what speed they were going.
👍
I got ya now . Sounds like my luck on how it goes ... Ya with out a within reason crony your just guess'n and head scratch'n .
 
👍
I got ya now . Sounds like my luck on how it goes ... Ya with out a within reason crony your just guess'n and head scratch'n .
Yep, some people are Leo's or Sagittarius etc., I was born under the sign of the turd. :ROFLMAO: But Mike had suggested that I try JSB Jumbo Beast 33.95 grains and I have a feeling that I may get the results I am expecting with those and my chronograph may not seem like it has lost its Chips. I believe the valve in this and the barrel length combo just makes it too powerful for the normal weight pellets and this video shooting 40 grain slugs' kind of reinforces that in my mind. Still love the gun just taking a pause till I can quite it down some and get some heavier stuff to shoot out of it.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
Last edited:
Got this sweet sweet new bed for my guns to sleep soundly in along with me...told the wife it was for her🤣. Always wanted a storage bed, quick test and the longest air rifle (the slav) fits! Ordered a little Air Venturi inline moisture filter for my Hill hand pump along with some filters.
 

Attachments

  • 20240720_231443.webp
    20240720_231443.webp
    204.7 KB · Views: 6
I shot my Avanti Valiant CZ200 Hunter to set it up for the next round of workplace marksmanship challenge. Dialed her in a 10m.
Got home and shot my 25 cal P35. It hits so hard at my resetting target at 18y it won’t reset. It goes up with such force it slaps off and falls back down. But I have to keep it zeroed there for large pests at my bird feeder. It’s shooting 25gr at 830fps.
 
Between heat and wind just about all i did was set up a card at 10m and adjust the R9's hinge bolt. It was a exciting 10-20 shots . Pretty much moring or afternoon shooting been a bust . So back in the AC sipping tea and trolling forums and gun shopping for a deal that aint there..lol
Was looking at the red dot and reflex sights I have accumulated and discovered that I have extra sights, so I guess I will have to get some more guns to mount them on!🤣
 
A few things today.
1. Finished the workplace shooting competition. It took double overtime. The winning score was 44 and 2nd place had a 43. It’s a 10m indoor competition. They started with a full rest in the first round. 2nd round was a front rest only. 3rd round between two shooters was from a table and only arms to support the rifle. Great shooting. I always have a prize, but all they care about is bragging rights 🤣

2. Tuned my bullshark 177 to 880 fps with 13gr JSB.

3. Shot my CZ200 Hunter at 10m to make sure it was ready for the final of the competition. Probably around 50 rounds.

4. Cleaned the barrel of my Bullshark.

5. Zeroed the newly tuned. Bullshark to the distance of my bird feeder.
 

Attachments

  • IMG_6511.webp
    IMG_6511.webp
    534.9 KB · Views: 5
A few things today.
1. Finished the workplace shooting competition. It took double overtime. The winning score was 44 and 2nd place had a 43. It’s a 10m indoor competition. They started with a full rest in the first round. 2nd round was a front rest only. 3rd round between two shooters was from a table and only arms to support the rifle. Great shooting. I always have a prize, but all they care about is bragging rights 🤣

2. Tuned my bullshark 177 to 880 fps with 13gr JSB.

3. Shot my CZ200 Hunter at 10m to make sure it was ready for the final of the competition. Probably around 50 rounds.

4. Cleaned the barrel of my Bullshark.

5. Zeroed the newly tuned. Bullshark to the distance of my bird feeder.
And I shot this from the window of my office before it became too dark. Love the Talos 10x. The barrel seems to be seasoning in since the barrel cleaning. I made a few clicks throughout. Started at the bottom and moved up.

 
Big news today is I found my Crown Saver! I moved offices at work and it was mixed with some stuff I forgot I stashed under the desk.
I spent a good deal of time in my shed at home looking for that thing last weekend.

I ordered some supplies before i found it to make my own pull. I still plan on making some for myself and friends. I want a shorter pull for my under 500mm barrel rifles, and a thinner pull for my 177’s. It should be fun for a rainy day.
 
Earlier I took a few shots at my KYL with my Concept on low TP setting, got all 4 in a row.

Got one a few minutes ago. I love having a camera on the feeder.

That’s my Concept Lite XR 22 with Pard DS35-50mm shooting 18gr on the low TP setting, so 500 fps 10 fpe.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top