Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Introductions Rob from Baton Rouge

RobBruce

New member
2
13
HAM Points
33.25
Country flag
Hello all, glad to be a new forum member.

I had a Benjamin pump as a kid unfortunately I sold it a long time ago. Now I’m 60 years young and now it’s my number favorite hobby.

Got back into air guns about 10 years ago when we had a rat problem at my parents house. Started out with a Gamo break barrel, which I found unacceptably inaccurate tried a Ruger Blackhawk. Still no satisfaction.

I then made the leap into PCP with a Crosman disco. Which I liked, but still it wasn’t accurate enough as I was trying to shoot rats at 30 yards. I made the jump to a marauder soon after that in 25 caliber.

I would bait the rats at night and shoot them with a Sony camcorder in night vision mode attached to the end of the rifle scope. This set up could hit a quarter at 33 yards in complete darkness with a good IR torch.

Fast-forward and I discovered the Bayou air gun club in 2018. We have a variety of competitions weekly. On weekends, we have field target and bench rest competitions every Saturday.

For a retired people there’s also a Wednesday morning 6 fpe competition using a variety of untraditional events.

For example, silhouette shooting 10 m rifles with targets at 40 yards with a scope. Shooting at what we call fly paper, 50 flies to a target at 25 yards. I have been using an FWB C 60 CO2 powered rifle for that but today I received my Crossman 2021 Challenger, which appears to be up to the task.

My collection expanded to a FX impact in 22 caliber. I won my first BR competition with that. I have purchased a .177 and a .25 barrels.

For our field target events, I have been using my Daystate Huntsman regal xl regulated with a hawke 4-24x sidewinder.

My current project is to improve my benchrest rifle within budget with a Weaver T-36. I currently have an Athlon FFP 8-34x.

I’m also looking for advice on improving the accuracy of the . 177 impact barrel from FX. I just watched a video on barrel polishing and air guns. I have JB polish and flitz on the way!

I also just read that the Challenger 2021 takes a marauder shroud and I might try that by borrowing it from my marauder. He’s unfortunately been side lined since it doesn’t have the shot string necessary for our competitions.
 

Attachments

  • IMG_0158.webp
    IMG_0158.webp
    253.9 KB · Views: 6
  • IMG_5928.webp
    IMG_5928.webp
    509.5 KB · Views: 6
  • IMG_5926.webp
    IMG_5926.webp
    801.2 KB · Views: 6
Welcome to the HAM community!

Sorry to tell you this, but you cannot swap the Marauder .25cal shroud over to the CH2021. The barrels have different outside diameters. You would need a shroud mount and shroud spacer from a .177 or .22. You can order all the parts you need from Crosman Customer Service.

John
Yeah, I don’t know where I read that.
 
Hello all, glad to be a new forum member.

I had a Benjamin pump as a kid unfortunately I sold it a long time ago. Now I’m 60 years young and now it’s my number favorite hobby.

Got back into air guns about 10 years ago when we had a rat problem at my parents house. Started out with a Gamo break barrel, which I found unacceptably inaccurate tried a Ruger Blackhawk. Still no satisfaction.

I then made the leap into PCP with a Crosman disco. Which I liked, but still it wasn’t accurate enough as I was trying to shoot rats at 30 yards. I made the jump to a marauder soon after that in 25 caliber.

I would bait the rats at night and shoot them with a Sony camcorder in night vision mode attached to the end of the rifle scope. This set up could hit a quarter at 33 yards in complete darkness with a good IR torch.

Fast-forward and I discovered the Bayou air gun club in 2018. We have a variety of competitions weekly. On weekends, we have field target and bench rest competitions every Saturday.

For a retired people there’s also a Wednesday morning 6 fpe competition using a variety of untraditional events.

For example, silhouette shooting 10 m rifles with targets at 40 yards with a scope. Shooting at what we call fly paper, 50 flies to a target at 25 yards. I have been using an FWB C 60 CO2 powered rifle for that but today I received my Crossman 2021 Challenger, which appears to be up to the task.

My collection expanded to a FX impact in 22 caliber. I won my first BR competition with that. I have purchased a .177 and a .25 barrels.

For our field target events, I have been using my Daystate Huntsman regal xl regulated with a hawke 4-24x sidewinder.

My current project is to improve my benchrest rifle within budget with a Weaver T-36. I currently have an Athlon FFP 8-34x.

I’m also looking for advice on improving the accuracy of the . 177 impact barrel from FX. I just watched a video on barrel polishing and air guns. I have JB polish and flitz on the way!

I also just read that the Challenger 2021 takes a marauder shroud and I might try that by borrowing it from my marauder. He’s unfortunately been side lined since it doesn’t have the shot string necessary for our competitions.
Hey man welcome to the HAM forum!
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top