Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

JTS .22 Pellets from my Evol Mini

Dairyboy

HAM Sniper
383
1,355
WA
HAM Points
1,385.25
Airguns of Arizona - 10% discount
Country flag
Been hearing about these JTS pellets for awhile and being very consistent pellets in weight and size. I figured that I might try some as I've had issues with JSB consistency in the past. Got them in today and very impressed with them. Love the small screw top tins better than the large press fit tins of JSBs. Pellets look perfect unlike my recent tin of JSB 15.9 where half are bent quite badly. Here's the 3 I got, left to right. 18.1gr, 21.53gr and 22.07gr.20230915_143221.webp
So initial shooting and I'm impressed. These are groups at 43yds off a rest. All 5 shot groups here's the FX 16gr which are my go to pellets for my Evol and the JTS 18gr.
20230915_173623.webp
These are the 21gr and 22gr from JTS. Both have an extra shot which is the top right pellet for an aim point. The 21gr has 6 shots as I wasn't sure if the one to the left was a flyer or me pulling it so did an extra.
20230915_173641.webp
So my Evol does seem to like these pellets. The 18gr might be my new go tos.

Next part I through them over the chronograph. I have the original FX Radar. I did it attached to the airgun, and then down at 43yds, 3 shot avg at each position. Here's my results:

FX 16gr - 895fps - 760fps
JTS 18gr - 850fps - 748fps
JTS 21gr - 772fps - 665fps
JTS 22gr - 770fps - 670fps

Based upon these numbers I have BC numbers on my gun with these speeds. YMMV. BTW conditions today were 85*F, 30" barometric, 40% humidity. And 782ft elevation.

FX 16gr - .037 which confirms what I've been using on Strelok for a year with no problems.

JTS 18gr - .045 these ones really surprised me

JTS 21gr - 0.35

JTS 22gr - 0.38

I'm at a loss on the heavier ones? I'll need to verify shooting at distance to see how accurate those numbers are. But I'm happy with how they all shoot! Hoping to try longer range tomorrow for groups.
 
Been hearing about these JTS pellets for awhile and being very consistent pellets in weight and size. I figured that I might try some as I've had issues with JSB consistency in the past. Got them in today and very impressed with them. Love the small screw top tins better than the large press fit tins of JSBs. Pellets look perfect unlike my recent tin of JSB 15.9 where half are bent quite badly.

So my Evol does seem to like these pellets. The 18gr might be my new go tos.


I'm at a loss on the heavier ones? I'll need to verify shooting at distance to see how accurate those numbers are. But I'm happy with how they all shoot! Hoping to try longer range tomorrow for groups.
any new updates?
are you still likeing the 18gr? what about the others?
 
I haven't shot it too much the last month but as far as I'm concerned the 18gr is all I really plan on putting through it now. I do have 16gr JSBs I'll need to go through eventually but the JTS 18gr are fantastic
I shoot the jts 22 grains out of my 15 inch Evol at 920 with the regulator at 2250 psi, 60 shots per fill and never looked back as far as it comes to pellets, love it!
 
Ya the center and right pellet look deformed bs th left one that looks kinda good. ..

The head of the center pellets kinda looks flattened or something ??and the on the right looks like some kinda casting mark on the top of the head ?? So the left well made pellet gave best result ..
 
Ya the center and right pellet look deformed bs th left one that looks kinda good. ..

The head of the center pellets kinda looks flattened or something ??and the on the right looks like some kinda casting mark on the top of the head ?? So the left well made pellet gave best result ..
The middle is designed as a semi wadcutter. Hence the flattened head. The right ones yeah have the "nipple" or whatever you want to call it but still seem to shoot well
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top