I See That The New Benjamin Pellets Are Available Here...

[Pguadalupe]

I look forward to ordering a few tins. It'll have to be 8 so that Pyramyd can give me 2 free. Good buy. Good shooting too, I hope. Made in the US of A. Orv.

Pellets are definitely made in the USA. Bloomfield NY this to be exact

 

[AtlasAirguns]

That's great I'll pick some up soon

 

[Hoppalong Doc]

Will they be making them in .22 cal anytime soon? I'll buy 'em off the 1st pallet Pyramyd gets. Orv.

 

[baranjhn]

I can't wait to try them! I'm getting a little disappointed in my JSB's with all the dented and out of round skirts lately.
I ordered two tins about two weeks ago and I'm patiently waiting for them to arrive.

 

[Pguadalupe]

Will they be making them in .22 cal anytime soon? I'll buy 'em off the 1st pallet Pyramyd gets. Orv.

In the works now. It shouldn't take as long as the .177's. Most of the work was the developments of the new process and materials. So as long as nothing major comes up then its just baselining the performance of the pellets in comparison of the standard production pellets.

 

[baranjhn]

In the works now. It shouldn't take as long as the .177's. Most of the work was the developments of the new process and materials. So as long as nothing major comes up then its just baselining the performance of the pellets in comparison of the standard production pellets.

Will they also be offered in .20?

 

[Pguadalupe]

Will they also be offered in .20?

No. That’s is not currently in the plan.

 

[baranjhn]

No. That’s is not currently in the plan.

That’s too bad. Good .20’s are hard to find, it would be an opportunity to bring glory back the line

 

[Dairyboy]

In the works now. It shouldn't take as long as the .177's. Most of the work was the developments of the new process and materials. So as long as nothing major comes up then its just baselining the performance of the pellets in comparison of the standard production pellets.

For .22 I'm assuming 14.3gr or would any heavier weights be added? Maybe the 19gr?

 

[Hoppalong Doc]

For .22 I'm assuming 14.3gr or would any heavier weights be added? Maybe the 19gr?

I'm shooting ca. 16g with my TX200 .22g. I find that my JSB and AA pellets, followed by thr H&N'S shoot best. I'm really looking forward to these new Benjamin's. Orv.

 

[Farmplinker2]

No. That’s is not currently in the plan.

You guys should make some. The 5mm enthusiasts here and other forums are starting to convince me I need one! Also think of all the Sheridans out there. Support your legacy rifles! (And I would really like a 360 or 3660 for my collection/pesting!)

 

[Pguadalupe]

For .22 I'm assuming 14.3gr or would any heavier weights be added? Maybe the 19gr?

yes. to start it will be 14.3gr. Once we get the main 3 going we will look at other opportunities in other areas to expand. We have always thought about heavier grain weights but have not made the commitment towards that.

 

[Smitty]

I wonder if it’ll take more than 6 months for the .22 cal to be available. Trying to decide if I should buy a few tins now of the .177’s or just wait. Thoughts?

 

[TerryE1]

I’m waiting for one tin on order. Looking forward to trying these in 25 meter bench rest.

 

[Luis Leon]

I wonder if it’ll take more than 6 months for the .22 cal to be available. Trying to decide if I should buy a few tins now of the .177’s or just wait. Thoughts?

Am waiting for them in .22, am excited that Benjamin/Crosman is committed to making match grade pellets.

 

[baranjhn]

I just received my shipped notification for them this morning! Looks like they'll be here 10/02.

 

[Pguadalupe]

I just received my shipped notification for them this morning! Looks like they'll be here 10/02.

sweet. they did just pack a bunch of this week. I'm sure most of them will be gone with the back orders

 

[Pguadalupe]

Am waiting for them in .22, am excited that Benjamin/Crosman is committed to making match grade pellets.

definitely wont take 6 months to have the .22s ready. like i said in the past most of the time and wait for the .177 was spent developing and redefining the process for these pellets. Now that everything has been defined from a process and control standpoint. We have the new dies and trial runs are underway.

I'm really excited to see the latest results because we ran a small batch a long time ago and they were really good but a lot has changed since then. So the latest trial run should be that much more better in theory.

 

[Pguadalupe]

I’m waiting for one tin on order. Looking forward to trying these in 25 meter bench rest.

Please share your results when you do get them.

 

[Pguadalupe]

I wonder if it’ll take more than 6 months for the .22 cal to be available. Trying to decide if I should buy a few tins now of the .177’s or just wait. Thoughts?

it shouldnt take 6mos. Were doing a trial run right now. it could be a few weeks and if all test well then those will go in to inventory and full production will get scheduled.