Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Alpha/Delta Wolf Delta Wolf .22 Regulator Creep ?

Centerfire

HAM Sharp Shooter
105
133
USA
HAM Points
988.50
Regarding a Delta Wolf Bronze, 17, .22 My situation is that I am noticing Regulator Creep.
If I am supposed to set the regulator at 155 (+ or - 5 bar) with in a couple of shots I'm at 154 bar and a few more shots I am at 153 bar.
I have not been able to find any literature source regarding this situation and am asking should I be readjusting the regulator to to the 155 bar as I continue to shoot.
Shooting JSB 25.43 gr pellets.
Thanks in advance,
Centerfire
 
And (because he's amazing) Sub12 Airgunner just dropped a video on how to service that reg! The kit he installs includes everything you need from daystate. O-rings, crush disc, etc. I will probably order a kit myself next year or so. Better to have it on hand....My reg I'm convinced (New Brk Ghost) has moved from 155 to 165bar and back with no real rhyme or reason. also not worried but keeping an eye on it. May spend the coin someday for better gauges on it....
 
I always let the chronograph tell me if something is off. Temp has a lot to do with pressures too. I wouldn’t sweat it. I love my guns with no reg gauges it’s one less thing to look at but on the flip side I can’t just look and see if the reg is good
 
I always let the chronograph tell me if something is off. Temp has a lot to do with pressures too. I wouldn’t sweat it. I love my guns with no reg gauges it’s one less thing to look at but on the flip side I can’t just look and see if the reg is good
Its funny you say that, I kind of agree....if speed and poi is good, keep on sending that lead! the S510 has tank pressure gauge only. The selectable power makes a HUGE difference in speed/FPE like under 500 fps to 960 min to max with a 14.3pellet. But they take a much different route than the hammer spring/reg pressure adjustments that is typical. I believe AA goes this route for less user error and less chance of leaks.
 
It’s funny you say that, I kind of agree....if speed and poi is good, keep on sending that lead! the S510 has tank pressure gauge only. The selectable power makes a HUGE difference in speed/FPE like under 500 fps to 960 min to max with a 14.3pellet. But they take a much different route than the hammer spring/reg pressure adjustments that is typical. I believe AA goes this route for less user error and less chance of leaks.
I LOVE that . Just shoot it.
 
It's not really what I would call reg creep - as this happens over the course of changing bottle pressure, not when the rifle has been sitting for a bit. I experienced the same thing during my 1.5 years ownership of an Alpha Wolf. First reg I had would swing almost 10 bar from a 250 - 150ish bar fill. Got a replacement which was a bit better and would only swing about 5 bar over the course of a fill.

If you are using the advanced settings with a fixed voltage and dwell setting then it can impact POI a tiny bit over the course of a bottle fill.

If you are using the built-in programs, they are able to self-correct for the set fps. So whether it is you changing the reg pressure, or the reg pressure changing over the course of a fill, the computer will compensate.
 
It's not really what I would call reg creep - as this happens over the course of changing bottle pressure, not when the rifle has been sitting for a bit. I experienced the same thing during my 1.5 years ownership of an Alpha Wolf. First reg I had would swing almost 10 bar from a 250 - 150ish bar fill. Got a replacement which was a bit better and would only swing about 5 bar over the course of a fill.

If you are using the advanced settings with a fixed voltage and dwell setting then it can impact POI a tiny bit over the course of a bottle fill.

If you are using the built-in programs, they are able to self-correct for the set fps. So whether it is you changing the reg pressure, or the reg pressure changing over the course of a fill, the computer will compensate.
CTshooter, Thank you for your reply. My Delta Wolf is a new 17" .22 with a new firing valve. It is used indoors, stable 68 degree temp several times a week. Just started experimenting with moving the regulator up to the 25 gr factory setting. Shoots 5 shots at 803 average fps. I thing I will follow your advice and keep my bottle pressure on the high side and continue to test.
Centerfire
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top