Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Alloy pellets

I have shot H&N copper plated lead pellets and H&N Green pellets. They are decent but not quite "match grade" I got them for plinking and pesting. The copper plated pellets beat the crap outta thin steel! I have shot ice and steel with the greens and they just laugh it off...most of them still look 100% usable after being smashed head first 1000+fps. The greens also bleed energy super quick vs lead. I do fear they could damage the barrel but I don't know? I have tossed a copper coated pellet or 2 with a badly bent skirt....would probably gouge up the breach o-ring and no way that skirt is expanding properly? The pellet below was shot @ 1100fps+ into ice 25Yards away.... It didn't mind one bit!
 

Attachments

  • 20241224_160855.webp
    20241224_160855.webp
    576.7 KB · Views: 6
  • 20241224_163223.webp
    20241224_163223.webp
    317.1 KB · Views: 6
  • 20241224_163250.webp
    20241224_163250.webp
    74.3 KB · Views: 6
  • 20241224_163258.webp
    20241224_163258.webp
    106.2 KB · Views: 6
I have shot H&N copper plated lead pellets and H&N Green pellets. They are decent but not quite "match grade" I got them for plinking and pesting. The copper plated pellets beat the crap outta thin steel! I have shot ice and steel with the greens and they just laugh it off...most of them still look 100% usable after being smashed head first 1000+fps. The greens also bleed energy super quick vs lead. I do fear they could damage the barrel but I don't know? I have tossed a copper coated pellet or 2 with a badly bent skirt....would probably gouge up the breach o-ring and no way that skirt is expanding properly? The pellet below was shot @ 1100fps+ into ice 25Yards away.... It didn't mind one bit!
Came out like new. You would think being as hard as they are they can cause more damage to the pcp rifle barrels and seals. I have a few tins in different calibers I've had for years. They are so expensive to shoot!
 
Came out like new. You would think being as hard as they are they can cause more damage to the pcp rifle barrels and seals. I have a few tins in different calibers I've had for years. They are so expensive to shoot!
I kind of thought of that, The GTO pellets being so hard , Don't shoot the copper ones so don't no about them..
Both my GKl pistols favor the GTO pellets , I don't think the hard pellets will hurt the seals, I never have to clean the barrels shooting the GTO pellets , Not yet anyway..
Mike
 
Last edited:
I kind of thought of that, The GTO pellets being so hard , Don't shoot the copper ones so don't no about them..
Both my GKl pistols favor the GTO pellets , I don't think the hard pellets will hurt the seals, I never have to clean the barrels shooting the GTO pellets , Not yet anyway..
Mike
That's the thing, I've never heard of the harder alloys damaging barrels/seals either but It does worry me a bit. The skirt edge is definitely sharper and I don't believe the air blast can correct a bad skirt like it can on a lead pellet. I chronoed the greens once from my S510 and it was a bit erratic....possibly from poor barrel to skirt seal? Was planning to use em on garden pests. The copper coated ones truly make no sense to me? They still have a lead center and just are not as accurate as their lead counterparts, (but not bad) Cost is more and the possibility of damage🤔....mine came in a H&N hunting pellet assortment.
 
I've and Air Venturi target trap, balistic putty with steel plate. Around 20' away from my recliner. Low power .177 with alloy pellets. The low power guns will not penetrate 1/2 inch drywall, don't ask how I know.
@Nordic Norm Makes more sense. You also don't have to worry about lead fragments on the floor that pets or grandchildren might ingest.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top