Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Ghost BRK Ghost Review

4 years...

So I'm past the 4 year mark now. I thought folks might be interested to see how it's holding up. Mechanically, everything works exactly like it should. The only way you'd know it's seen so much use is from the anodizing on the frame fading. Here are some photos of that...

PXL_20261118_013232734.jpg

PXL_20261118_013249516.jpg

PXL_20261118_013504449.jpg

PXL_20261118_013513523.jpg

PXL_20261118_013527419.jpg



The flecks by the magazine gap are lead (driver side), I'm guessing that's transferred from the projectile container to the frame when I'm single-feeding.

There is some wear by the fill port from the extended female foster rubbing against the sides of that recessed area (sorry didn't grab a photo).

Since last shot count report these have been the primary projectile...

Screenshot_20261118-081206.png



Bout 9000 shots in that stack of empties. Seems like I was something like 15,000 to 20,000 shots the last time I did a count. So we're probably up north of 25,000 shots through this particular Ghost now, and it might even be closer to 30k.

It's the gun I grab when I want to reach out and touch something, usually a prairie dog. I've been shooting prairie dogs with airguns for about 14 years, and I've never been more efficient at whacking them than I can be with this gun. For that use, it's the perfect combination of: high shot count, low report, cheap projectiles (especially relative to BC), consistency (in fps and holding scope zero), OAL, and ergonomics.

I feed it air and pellets. Other than spinning the power wheel to max for slugs and "6" for pellets, I haven't made any adjustments to it for longer than I can remember. Dope sheet for each projectile there on the bottle. Maintenance consists of pulling the barrel every 3-4 boxes of slugs and pushing some Gunzilla soaked tight patches through it.

Overall I've greatly enjoyed this one, and continue to do so.
Funny recently I thought my anodizing was getting rough too, but I hit it with some brake cleaner on a rag and it came up like new again!

Man if I get 90% of the accuracy with my inbound .22 slug barrel as you get with your .20 I will be happy😅
The .22 (mine anyways) is a one trick pony on one tune- 25.39gr Mrds only, and they have to be the deep or the regular ones, JTS, any light pellets, and slugs all sucked. 3 weeks ago I dumped 25 mrds into a very nice small cluster @ 50Y with only one (nasty!) flier after it sat for weeks.
@Franklink I know you have done this with the B.W. (decreased) but have you ever increased your ghosts plenum or seen this done? I heard tell of someone doing so at a U.S. competition and was shooting his ghost as a .357!
In .177 or .22 the Ghost as-is has all the power youll need for slugs but I may try pulling my reg gauge at some point and making a small blank for some more cc's of plenum air.
 
Funny recently I thought my anodizing was getting rough too, but I hit it with some brake cleaner on a rag and it came up like new again!

Man if I get 90% of the accuracy with my inbound .22 slug barrel as you get with your .20 I will be happy😅
The .22 (mine anyways) is a one trick pony on one tune- 25.39gr Mrds only, and they have to be the deep or the regular ones, JTS, any light pellets, and slugs all sucked. 3 weeks ago I dumped 25 mrds into a very nice small cluster @ 50Y with only one (nasty!) flier after it sat for weeks.
@Franklink I know you have done this with the B.W. (decreased) but have you ever increased your ghosts plenum or seen this done? I heard tell of someone doing so at a U.S. competition and was shooting his ghost as a .357!
In .177 or .22 the Ghost as-is has all the power youll need for slugs but I may try pulling my reg gauge at some point and making a small blank for some more cc's of plenum air.
The .20 Ghost venture has been outstanding, as I've crowed about extensively for a couple years now.

I have not experimented with an increase or decrease in the plenum size on the Ghost. I agree that it mostly has a sufficiently sized plenum for .22 and under. With the only possible exception being heavy 40 grain .22 slugs. If I was working towards a .22/40grain slug shooting Ghost, and not getting the speeds I wanted, I think I'd try to go the longer barrel route before I'd experiment with adding plenum.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top