Last 1 of these i got from aoa cause i couldn’t find 1 anywhere else cost me $100Today I am researching the construction of European pellet pouches!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Last 1 of these i got from aoa cause i couldn’t find 1 anywhere else cost me $100Today I am researching the construction of European pellet pouches!
I always though those where cool I just never figured it out would use one. I do tell myself to get one just cause LOLLast 1 of these i got from aoa cause i couldn’t find 1 anywhere else cost me $100
That British pellet pouch is wet molded, and I can't see it clearly enough, but I think it is glued with minimal stiching, I am working on a design for a round pellet pouch with a magnetic clasp "lid" and a belt clip. I am thinking that it can be clipped on a belt, or on the outside of your front pocket, at the same place we all clip our knives.Last 1 of these i got from aoa cause i couldn’t find 1 anywhere else cost me $100
It’s definitely wet molded and probably glued with Barge Cement. It’s very nicely cut and finished and well worth the price. I look forward to seeing your design.That British pellet pouch is wet molded, and I can't see it clearly enough, but I think it is glued with minimal stiching, I am working on a design for a round pellet pouch with a magnetic clasp "lid" and a belt clip. I am thinking that it can be clipped on a belt, or on the outside of your front pocket, at the same place we all clip our knives.
I will post pics of my prototype. Its mostly designed on my software, but will report back!




Field target and hunting is what i use them for. Most all of my guns are set up single shot.Looks good. That was pretty darn quick. I would definitely look at a lanyard option as well. I could be wrong, but I imagine that the idea of hanging it around your neck is that it keeps them close to your rifle and within reach without putting your rifle down. I could be completely wrong on that though. I’ve always thought they were a Field Target thing. Great job.
So, now you have me thinking of your next possible airgun product LOL. I’m sure there’s a market for leather mag holders : singles, doubles, triples. Clip-ons, belt slides etc.. Sorry, I can’t help myself LOL. NOTE to self, no more leather work. These deserve a thread of their own.OK dont laugh. Awl In prototype number uno. I don't find the neck lanyard particularly useful, but I can make one. I like the clip. Iv'e tried it clipped to my pocket, and I could get a pellet out with one hand. It could clip on a belt as well, and I haven't considered other options, but I will contemplate it. This would be useful for the single shot types; springers most likely.
It is simple veg tan leather. ~6oz on the sides and 4oz gusset/top. THe clip is screwed on with chigago studs, and the leather is treated with bees wax. I use a heat gun to melt it into both sides of the leather. Stitched with 1mm Ritza tiger thread in burgundy. The clasp is magnetic and seems to hold well. inside width is about 3/4" and it is about 2.5" diameter on the side pieces. Total OD a little bigger. Oh, and there is only a tiny bit of Barge, which I used to hold the strap snap in place before I stitched it. Note the hardware is hidden. Otherwise all hand stitched.
This is my first one, so once I figure out what will work best, then I can embellish it with better leather, liner, maybe conchos or studs or the like. I can also engrage any graphic on it too.
Let me know what you think! Good, bad or otherwise; got no ego anymore.
View attachment 24342View attachment 24343View attachment 24344View attachment 24346
I appreciate where you’re coming from, but it’s the truth that they all leak eventually. However between an S510 and BRK (I own both) the two newer BRK’s that I own are much, much easier to work on imo.Trying to decide on a DRS, BRK, S510 or a Huntsman and what caliber. Been doing a bit of work at home to help out a friend and make some extra hobby money for myself. I would like to get a high-quality gun that I never would have considered for Christmas this year. I would prefer that it be about 6 pounds or less without a scope. Still don't think I would want to spend more than about $1,700 on one gun. I really would like to have something that would last my lifetime, maybe 10 years if I'm lucky, without leaking or breaking so I am really thinking that maybe a S510 might be the most reliable and best way for me to go. I don't really know in that I have never considered or paid very much attention to any of these high-end guns before because they were all well out of my budget.
Keep an eye on AoA used section as well. They have had some awesome deals on Ghost recently. I had it narrowed down to a FX Impact, a Ghost, or a RAW HW1000x LRT. They seem like the highest rated PCP rifles across the web. If you look at competitions they are always in the top tier. I like the S510 as well, but I want to collect the top ones then I will work my way down the listTrying to decide on a DRS, BRK, S510 or a Huntsman and what caliber. Been doing a bit of work at home to help out a friend and make some extra hobby money for myself. I would like to get a high-quality gun that I never would have considered for Christmas this year. I would prefer that it be about 6 pounds or less without a scope. Still don't think I would want to spend more than about $1,700 on one gun. I really would like to have something that would last my lifetime, maybe 10 years if I'm lucky, without leaking or breaking so I am really thinking that maybe a S510 might be the most reliable and best way for me to go. I don't really know in that I have never considered or paid very much attention to any of these high-end guns before because they were all well out of my budget.
My Falcon FN19 .22 (single shot) is more than 30yrs old and has many thousands of rounds through it. It still has all the original internal o-rings and doesn't leak at all. Only o-rings that have ever failed in the Falcon are the o-rings in the funky fill probe adapter.The only type of airgun I can think that would last 10 years with no problems is a high quality springer. PCPs are always going to leak before 10 years IMHO.

We use essential cookies to make this site work, and optional cookies to enhance your experience.