Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Others New Western caught my attention

This is going to be one of those good news and bad news stories emphasis on a bad.

I received the Wrangler today 🙂.

View attachment 24251
View attachment 24252

Wait for it…..





😧


View attachment 24247View attachment 24248View attachment 24249View attachment 24250

Wreck it Ralph at FedEx must have been on a rampage.

So as you can see, an obvious impact. The barrel went through the interior box, though it was not visible on the outer shipping box.

I think it’s lost pressure because normally AOA sends them out filled, which makes sense because I can hear parts sliding back and forth in the HPA tube 🤔.

The barrel and the HPA are also scratched up where they were rubbing together, presumably during additional impacts.

🤬😭😂

I did pay extra for shipping insurance anyway….
As you know, this is what I'm always warning people about, the horrors of shipping, it sucks to have the proof show up at your door! It's great that AOA is going to take care of it so quickly. The specs of the gun do look to be pretty damn good! I am really curious how this works out. Good luck!
 
As you know, this is what I'm always warning people about, the horrors of shipping, it sucks to have the proof show up at your door! It's great that AOA is going to take care of it so quickly. The specs of the gun do look to be pretty damn good! I am really curious how this works out. Good luck!

I have started to buy shipping insurance on the more expensive items. It’s a struggle for me, I feel like it’s just giving away money.

AOA is sending out the new one while the damaged one is still on its way back, that’s definitely stepping up 👍👍.

Of course I couldn’t shoot it but it shouldered well for me, my very limited initial impression is a good one. Definitely had a perfect opportunity to get a refund or something else if I didn’t like something about it.

I ordered H&N and Zan slug samples from PA, mostly backordered. But I have some JSB Beasts that should be here approximately the same time the new Airgun arrives.

I need to figure out what scope to use for it, thinking a Midas TAC G2 5-30X56
 
That is cool that the folks at AoA are taking care of you. Something I noticed with other airgun shipments is the lack of barrel support and/or protection there. A simple sleeve on the barrel or packing between the air tank would at least keep the two long flexible parts off from each other. That's cheap insurance for the additional cost incurred from damage.
 
That is cool that the folks at AoA are taking care of you. Something I noticed with other airgun shipments is the lack of barrel support and/or protection there. A simple sleeve on the barrel or packing between the air tank would at least keep the two long flexible parts off from each other. That's cheap insurance for the additional cost incurred from damage.
I had sent an email with pictures before I called, Darren was looking at it while he was talking to me, and at first he thought it was just the scratches on the barrel, and they were willing to replace it if it didn’t clean up. I was like, no, that’s just incidental. The parts that I hear rolling around in the HPA tube are my main concern lol.

He had me cock the rifle and listen to make sure that it wasn’t coming from the hammer spring 😉, I could tell that it wasn’t but never hurts to be sure.
 
I'm very curious about this rifle - it seems like all the ingredients for a nice modestly price airgun if it delivers. I'm sure Dana will have a review out in a few months after some time with it. But I'd like to see a few first impressions and shooting threads or videos.

@FL22 - Did you get a chance to squeeze off the trigger when cocked? Any impressions on trigger feel?
 
- Did you get a chance to squeeze off the trigger when cocked? Any impressions on trigger feel?
No, I only cocked and uncocked it at Darren’s request. When I shouldered it, I did squeeze the trigger without it being cocked.

Because I could tell there was parts rolling around in the HPA tube, I did not want to dry fire it. It still had about 110 bar and I did not want to risk any debris getting into the breach block and potentially causing further damage.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top