Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Ghost Ghost Comments

Hapo

HAM Specialist
86
201
HAM Points
394.50
...I could not find a thread to attach these comments to...the thing I like the most and the thing I like the least aboot the Ghost...

...I don't feel the need to comment upon all the other things aboot the Ghost here...methinks that would be redundant...

A: what I like:

...after sitting unused for several months my Ghost HP .22 appears to have maintained its first shot velocity and point of impact as well as air pressure...

...in its initial state of tune this was not the case...it had been tuned to a very low level...the first shots were a little slow after the rifle sat for a while...Hapo no like...

...after receiving advise here, I tuned the gun for more power with heavier pellet...it was easy...

...this was sort of a test...now Hapo like...

B: what I don't:

...while I very much appreciate the compact and solid design of the Ghost magazines it is unfortunate that there no way to see how many shots are left w/o removing the magazine and I often end up shooting an empty rifle...that tends to suk...

...the magazines for the $600 Benjimen Cayden accommodate both issues, eh...
 
Last edited:
...I could not find a thread to attach these comments to...the thing I like the most and the thing I like the least aboot the Ghost...

...I don't feel the need to comment upon all the other things aboot the Ghost here...methinks that would be redundant...

A: what I like:

...after sitting unused for several months my Ghost HP .22 appears to have maintained its first shot velocity and point of impact as well as air pressure...

...in its initial state of tune this was not the case...it had been tuned to a very low level...the first shots were a little slow after the rifle sat for a while...Hapo no like...

...after receiving advise here, I tuned the gun for more power with heavier pellet...it was easy...

...this was sort of a test...now Hapo like...

B: what I don't:

...while I very much appreciate the compact and solid design of the Ghost magazines it is unfortunate that there no way to see how many shots are left w/o removing the magazine and I often end up shooting an empty rifle...that tends to suk...

...the magazines for the $600 Benjimen Cayden accommodate both issues, eh...
Good list! I agree on the cold shot thing, a non issue in both my pcps but my blinking TX has 2 or 3! 🙄 low cold shots before she's on point. (Since it's not the gun I reach for to quickly deal with a pest that's ok...sort of..). Trigger on my 👻 has an excellent pull weight, I had prepped myself so much to mod the trigger and was almost sad when I realized there was no need to mess with it. It has waaaaay less drop shooting Mrds @ 975 than my S510 shooting 18.13 @ 880 beyond 50Yards which is what I bought it for. Polished the barrel and changed the mediocre oem grip for a Fab Defense and loving it!
Only thing I really didn't like?.... the price😂
 
...while I very much appreciate the compact and solid design of the Ghost magazines it is unfortunate that there no way to see how many shots are left w/o removing the magazine and I often end up shooting an empty rifle...that tends to suk...

same with the wifes BRK Concept probably the same magazine?
almost alway have that shot of just air. and air is valuable rather you have a hand pump a compressor of haveing a tank filled.
maybe plugging the pellet slot for shot 11 is the ticket?
 
same with the wifes BRK Concept probably the same magazine?
almost alway have that shot of just air. and air is valuable rather you have a hand pump a compressor of haveing a tank filled.
maybe plugging the pellet slot for shot 11 is the ticket?
The Ghost mags have one cool feature: mag has an offset machined spacing on the last pellet slot. When u go to load another pellet and it's empty mag free spins a tad longer and makes a metallic wrap (metal on metal) sound so you'll know it's empty. Still don't clue in to it and when you go to slide the lever forward to chamber the round you won't be able to as the pin probe will strike the offset spot on the mag. Super cool feature my S-510 doesn't have. Only way to shoot it empty is to not load the mag all the way.
 
The Ghost mags have one cool feature: mag has an offset machined spacing on the last pellet slot. When u go to load another pellet and it's empty mag free spins a tad longer and makes a metallic wrap (metal on metal) sound so you'll know it's empty. Still don't clue in to it and when you go to slide the lever forward to chamber the round you won't be able to as the pin probe will strike the offset spot on the mag. Super cool feature my S-510 doesn't have. Only way to shoot it empty is to not load the mag all the way.
Lol
I would never hear short I just listening for it and then I would be thinking of or concintrating on something else and mis it
when your designing things you dont always think everything and its easy to say wow why didnt they think of this or that but I would bet had it come up they would have.
it would could no more money to not machine that last whole but they most likey was going for getting the most they could out of the magazine.
then ones its made it because a bit of an expense to make the change
 
Good list! I agree on the cold shot thing, a non issue in both my pcps but my blinking TX has 2 or 3! 🙄 low cold shots before she's on point. (Since it's not the gun I reach for to quickly deal with a pest that's ok...sort of..). Trigger on my 👻 has an excellent pull weight, I had prepped myself so much to mod the trigger and was almost sad when I realized there was no need to mess with it. It has waaaaay less drop shooting Mrds @ 975 than my S510 shooting 18.13 @ 880 beyond 50Yards which is what I bought it for. Polished the barrel and changed the mediocre oem grip for a Fab Defense and loving it!
Only thing I really didn't like?.... the price😂
Where did you buy your Fab Defense grip?
 
...I could not find a thread to attach these comments to...the thing I like the most and the thing I like the least aboot the Ghost...

...I don't feel the need to comment upon all the other things aboot the Ghost here...methinks that would be redundant...

A: what I like:

...after sitting unused for several months my Ghost HP .22 appears to have maintained its first shot velocity and point of impact as well as air pressure...

...in its initial state of tune this was not the case...it had been tuned to a very low level...the first shots were a little slow after the rifle sat for a while...Hapo no like...

...after receiving advise here, I tuned the gun for more power with heavier pellet...it was easy...

...this was sort of a test...now Hapo like...

B: what I don't:

...while I very much appreciate the compact and solid design of the Ghost magazines it is unfortunate that there no way to see how many shots are left w/o removing the magazine and I often end up shooting an empty rifle...that tends to suk...

...the magazines for the $600 Benjimen Cayden accommodate both issues, eh...
For the magazine you can paint a line on the last pellet hole...I had to do this with my Huntsman because it will cock and shoot on an empty cylinder. That can cost you points in FT 😎

Tony P.
 
For the magazine you can paint a line on the last pellet hole...I had to do this with my Huntsman because it will cock and shoot on an empty cylinder. That can cost you points in FT 😎

Tony P.
I've thought about doing that to both my pcp mags😅 I would etch or mark a 3 on the 3rd last pellet slot (not counting if one in chamber) you can look where your at instead of guessing!
Where did you buy your Fab Defense grip?
Yeah good luck finding that in Canada🤣 The secret? Aztec Armory. Life saver company in Arizona that ships gun parts you CANT get up here and they deal with all the exporting crap, bless em. Price was good too! PS the catch? They only make 1 shipment to Canada per month. I waited almost 2 months for mine. Worth it!
 
I've thought about doing that to both my pcp mags😅 I would etch or mark a 3 on the 3rd last pellet slot (not counting if one in chamber) you can look where your at instead of guessing!

Yeah good luck finding that in Canada🤣 The secret? Aztec Armory. Life saver company in Arizona that ships gun parts you CANT get up here and they deal with all the exporting crap, bless em. Price was good too! PS the catch? They only make 1 shipment to Canada per month. I waited almost 2 months for mine. Worth it!
Thanks for mentioning Aztec Armory, looks like they have some cool stuff we need. 👍
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top