What did you do airgun related today?

[Soren Drost]

Picked up my Daystate BlackWolf TAC .177 HP from my Danish RFD Will be at my range later on today

 

[Danman]

Yes, challenge is to cut it in 50 or less. Airguns are supposed to be 7yds off-hand, but I thought that inappropriate for pcps at a minimum. I actually plan to try this again with the Cap at 50yds, so that there's more challenge. (Was open for 22LR at 50yds). As for holding the can in place, string (or old cord in my case) through the can tab and then taped to target box so that it hangs down in front of it.

Thanks, one more question! What is the pellet speed (or fpe) your shooting these challenges at? My S510 (32fpe) and Ghost(53fpe) would absolutely wreck any can on the first shot. Usually it splits them top to bottom....that might be the water inside though too

 

[pan60]

Picked up my Daystate BlackWolf TAC .177 HP from my Danish RFD Will be at my range later on today

View attachment 12450

rip it open : )

 

[Soren Drost]

rip it open : )

Already unpacked and have been at my range earlier

 

[CTAirgunner]

Made an end cap for my CF Shroud system I am building for my Airacuda, the rest of the build can be found here if any of you are interested.

Modifications JTS Airacuda Max .22 Build thread

Mar 27, 2025

Since I shifted hobbies a bit from a year ago I am not in the same financial position to be unloading 10000 dollars on airgun setups lmao hence why I have been looking at budget setups. Well a friend of mine who's moving to a far less restrictive part of the country (so he can go back to PB'ers) did some old school bartering with me and I traded some mechanic work for his JTS Airacuda Max .22 scoped (west hunter 4-16 , not a bad scope actually), air supply setup, case, and ammunition. Win win for me , love using my automotive tools and have been on the fence of which way to go with...

• CTAirgunner
• Replies: 53
• Forum: Airgun Modding And Theory

• 
• 

 

[PapaT]

Thanks, one more question! What is the pellet speed (or fpe) your shooting these challenges at? My S510 (32fpe) and Ghost(53fpe) would absolutely wreck any can on the first shot. Usually it splits them top to bottom....that might be the water inside though too

My Avenger is 25 cal, so 45-50 fpe. I was shooting an empty can, and it still wrecks. I know that LR was still taking 50+ shots for the one(s) I've seent.

 

[CTAirgunner]

Got my custom shroud/barrel setup 80% done.

 

[Florida_Man]

2 shots today. One less squirrel and invasive lizard thanks to my Bullshark 177

Most of the day was devoted to home improvement plumbing projects

 

[PapaT]

2 shots today. One less squirrel and invasive lizard thanks to my Bullshark 177

Most of the day was devoted to home improvement plumbing projects

Most of mine has been housework and work work. Did get my Hornady black bbs in, and email about test barrel band for the Pinty. Might still get a chance to slip away and bb plink a can in the garage, but I suspect I will have to live vicariously for today.

 

[Florida_Man]

Most of mine has been housework and work work. Did get my Hornady black bbs in, and email about test barrel band for the Pinty. Might still get a chance to slip away and bb plink a can in the garage, but I suspect I will have to live vicariously for today.

Same here. This plumbing project already drew blood, so I got that out of the way. Maybe a burn soldering tomorrow..

 

[Danman]

Sitting in Hospital waiting room, (trying to get some meds to get over this sinus infection ) i ordered 3 mags from Maple Customs, a pair of 28mm Wika gauges for the Ghost (aka the money pit), and a swivel fitting for the Hill compressor so the fill line isn't straight up out the filter housing. I instantly feel better

 

[pan60]

get well soon

 

[Farmplinker2]

Hit some cans and the dueling tree.

 

[Billm]

Got my custom shroud/barrel setup 80% done.

View attachment 12461View attachment 12462

Looking good

 

[Billm]

The Accu-Tac arrived today and I had to mount it. I don’t have the Arca rail: so as they say “necessity is the mother of invention”. Not my invention, but it works. $50 vs $215. It’s been windy as usual,so maybe a diy monopod next.

 

[Rusty]

Received 4 tins each of two styles of 177 ammo for all the pistols I need to be shooting.Be Well
Brothers, Rusty .

 

[Grunt64]

I was a bit busy today,lol. first, I replaced an airline on one of my compressors that runs from the air block to the pressure gauge. I had to use a QD because I didn't have the right hose on hand and then I started pallet number 1 of 12 that I will need to build 3, 6x6x6ft hunting blind out of them. I know this doesn't directly have something to do with air guns but i hunt with one.

 

[jps2486]

Today, I'm driving out to my favorite airgun dealer, Trenier Airguns, and pick up some 30 cal AEA pellets for the next match. Of course I'll do some shooting there with Jeff-shooting the bull.

 

[Crosman451]

Sometimes we have time to shoot, sometimes we don’t. Sometimes we only have time to organize or do maintenance.

What did you do airgun related today?

I'm am doing some of my inventory on a few!

 

[Florida_Man]

I took out three agama and a squirrel this weekend. If I could stay up late there have been a few rats. All shots this weekend have been with my 177 Bullshark.