- Last edited:
- Replies: 9
Last edited:

The Red Panda Bench air rifle is the first model to be available from Karma Airguns. Pyramyd is accepting pre-orders now with an estimated in-stock date of 11 September 2024.
In fact – as HAM readers will know from our 2024 IWA OutdoorClassics show report – apart from the Red Panda Bench, there’s a forthcoming Red Panda PRS. In addition, there’s also a future Karma SLS model that will be available in Standard and Compact versions.
Of course many HAM readers know of the prototype Karma Red Panda that was shot with great success by Thayne Simmons in 2023. Thayne won the 100 yards benchrest competitions at the 2023 Rocky Mountain shoot, the Pyramyd Air Cup and Extreme Benchrest. That is, the three big annual US airgun-shooting competitions.
This production Red Panda Bench air rifle incorporates extensive engineering enhancements compared to Thayne’s award-winning prototype. It will be available in four calibers. These are .22, .25, .30 and .357 cal. Power levels are up to 180 Ft/Lbs, as we see in the following table.
| .22 Cal | .25 Cal. | .30 Cal | .375 Cal | |
|---|---|---|---|---|
| Max. Muzzle Energy | 100 Ft/Lbs | 120 Ft/Lbs | 150 Ft/Lbs | 180 Ft/Lbs |
| Magazine capacity | 18 | 16 | 13 | 11 |
| Max. shots per fill | 220 | 150 | 75 | 40 |
| Pellet Barrel twist rates | 1 in 17.7 | 1 in 17.7 | 1 in 24 | 1 in 28 |
The Red Panda Benchwill be available with a choice of pellet and slug barrels. The initial products being listed by Pyramyd carry the pellet barrel.
The Picatinny optics rail incorporates a 30 MOA cant, in line with the long-range shooting expectations for this gun. There’s also a bubble level at the rear to ensure repeatable, cant-free alignment when shooting.
As can be deduced from the photograph above, the Red Panda Bench design incorporates two regulators (hence the three pressure gauges). These regulators are externally-adjustable.
There’s also an externally-adjustable transfer port and hammer spring. The HPA cylinder has a capacity of 600 cc and a maximum fill pressure of 310 bar (4,496 PSI).
As can be seen from the photograph below, the two-stage match trigger has much potential for adjustment, too.
The stock is equipped with the expected adjustable cheekpiece and butt pad. It’s also possible to adjust the length-of-pull.
Up-front, the forearm features long M-LOK accessory rails for adding items such as shooting weights, bipods, and more.
Of course, a dedicated benchrest gun is going to be heavy. This Red Panda weighs-in at 16.8 Lbs, plus scope. The overall length is 42 Inches and the barrel length 28 Inches.
Karma Airguns has put together an introductory video on the Red Panda Bench. This gives a lot more information.
No-one would expect this to be a “bargain-basement” air rifle. However the price of $2,350.00 seems competitive for what’s on offer with this soon-to-be-available new air rifle.
Karma Red Panda Bench PCP Air Rifle, Pellet Barrel 0.22
The post The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air appeared first on Hard Air Magazine.
