Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air

Last edited:
1724279190338.png

The Red Panda Bench air rifle is the first model to be available from Karma Airguns. Pyramyd is accepting pre-orders now with an estimated in-stock date of 11 September 2024.

In fact – as HAM readers will know from our 2024 IWA OutdoorClassics show report – apart from the Red Panda Bench, there’s a forthcoming Red Panda PRS. In addition, there’s also a future Karma SLS model that will be available in Standard and Compact versions.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air


Of course many HAM readers know of the prototype Karma Red Panda that was shot with great success by Thayne Simmons in 2023. Thayne won the 100 yards benchrest competitions at the 2023 Rocky Mountain shoot, the Pyramyd Air Cup and Extreme Benchrest. That is, the three big annual US airgun-shooting competitions.

This production Red Panda Bench air rifle incorporates extensive engineering enhancements compared to Thayne’s award-winning prototype. It will be available in four calibers. These are .22, .25, .30 and .357 cal. Power levels are up to 180 Ft/Lbs, as we see in the following table.

.22 Cal.25 Cal..30 Cal.375 Cal
Max. Muzzle Energy100 Ft/Lbs120 Ft/Lbs150 Ft/Lbs180 Ft/Lbs
Magazine capacity18161311
Max. shots per fill2201507540
Pellet Barrel twist rates1 in 17.71 in 17.71 in 241 in 28

The Red Panda Benchwill be available with a choice of pellet and slug barrels. The initial products being listed by Pyramyd carry the pellet barrel.

The Picatinny optics rail incorporates a 30 MOA cant, in line with the long-range shooting expectations for this gun. There’s also a bubble level at the rear to ensure repeatable, cant-free alignment when shooting.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air


As can be deduced from the photograph above, the Red Panda Bench design incorporates two regulators (hence the three pressure gauges). These regulators are externally-adjustable.

There’s also an externally-adjustable transfer port and hammer spring. The HPA cylinder has a capacity of 600 cc and a maximum fill pressure of 310 bar (4,496 PSI).

As can be seen from the photograph below, the two-stage match trigger has much potential for adjustment, too.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air


The stock is equipped with the expected adjustable cheekpiece and butt pad. It’s also possible to adjust the length-of-pull.

Up-front, the forearm features long M-LOK accessory rails for adding items such as shooting weights, bipods, and more.

Of course, a dedicated benchrest gun is going to be heavy. This Red Panda weighs-in at 16.8 Lbs, plus scope. The overall length is 42 Inches and the barrel length 28 Inches.

Karma Airguns has put together an introductory video on the Red Panda Bench. This gives a lot more information.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

No-one would expect this to be a “bargain-basement” air rifle. However the price of $2,350.00 seems competitive for what’s on offer with this soon-to-be-available new air rifle.

Karma Red Panda Bench PCP Air Rifle, Pellet Barrel 0.22
image-100159921-13713383



The post The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air appeared first on Hard Air Magazine.
 
Last edited:
I would love to read an article on Karma, the company. Who exactly are they, who designs them, where are they built and with what materials? Stuff like that. It's great that it just showed up on the scene winning everything, kind of like RusBear did with his own gun, but I want to know if it's just a bunch of cnc machines on autopilot, or really into it airgunners, making these things. Maybe it doesn't matter, just so long as the owner is really into it, ok, who's that? A holding company or an indivdual in it for the long term? Also, and I know Thane already won the triple crown with this thing, but if these are the same people making AEA guns, I would like to hear alot about the magazines. If the magazine is good enough to be used in competition, and it's made by the same people, why don't they fix the magazines in all of their other guns? Maybe the information is out there and I haven't stumbled upon it yet. If anybody has a link, please share it.
 
That's good to know. I still think that it is spooky for new companies to show up and not have an owner or a frontman to tell everybody (who's business they want) who they are, what is their plans, and all the other info that would influence me to give them my money, over somebody else. Ed was there for Edgun, Fred was there for FX, Scout's owner is out and about, AAA finds the time to post occasionally, RTI showed up as a group. I understand that there is a language gap for some, but too often there is just a curtain that they don't want you to look behind. Like it or not, we are in the information age and people want the info, better to get out in front of it, than to leave it to somebody else. These airguns, at this level, are mostly just luxury item toys, not needed at all and expensive, you'd think that they''d put more effort into selling them, kind of like what FX does. Love'em or hate'em, excellent marketing and they are quick to respond to change, I think they never sit still. Some people love that crazy frenetic energy and others don't, but everyone likes to be kept in the loop.
 
That's good to know. I still think that it is spooky for new companies to show up and not have an owner or a frontman to tell everybody (who's business they want) who they are, what is their plans, and all the other info that would influence me to give them my money, over somebody else. Ed was there for Edgun, Fred was there for FX, Scout's owner is out and about, AAA finds the time to post occasionally, RTI showed up as a group. I understand that there is a language gap for some, but too often there is just a curtain that they don't want you to look behind. Like it or not, we are in the information age and people want the info, better to get out in front of it, than to leave it to somebody else. These airguns, at this level, are mostly just luxury item toys, not needed at all and expensive, you'd think that they''d put more effort into selling them, kind of like what FX does. Love'em or hate'em, excellent marketing and they are quick to respond to change, I think they never sit still. Some people love that crazy frenetic energy and others don't, but everyone likes to be kept in the loop.
I totally agree with you on companies being transparent and available. Skout has been the best example of this in my limited experience. I also understand they can't share the secret sauce even though it's ketchup and mayo. :)

I've purposely steered away from other higher brands for their limited support and secrecy on specs.
 
View attachment 7860

The Red Panda Bench air rifle is the first model to be available from Karma Airguns. Pyramyd is accepting pre-orders now with an estimated in-stock date of 11 September 2024.

In fact – as HAM readers will know from our 2024 IWA OutdoorClassics show report – apart from the Red Panda Bench, there’s a forthcoming Red Panda PRS. In addition, there’s also a future Karma SLS model that will be available in Standard and Compact versions.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air


Of course many HAM readers know of the prototype Karma Red Panda that was shot with great success by Thayne Simmons in 2023. Thayne won the 100 yards benchrest competitions at the 2023 Rocky Mountain shoot, the Pyramyd Air Cup and Extreme Benchrest. That is, the three big annual US airgun-shooting competitions.

This production Red Panda Bench air rifle incorporates extensive engineering enhancements compared to Thayne’s award-winning prototype. It will be available in four calibers. These are .22, .25, .30 and .357 cal. Power levels are up to 180 Ft/Lbs, as we see in the following table.

.22 Cal.25 Cal..30 Cal.375 Cal
Max. Muzzle Energy100 Ft/Lbs120 Ft/Lbs150 Ft/Lbs180 Ft/Lbs
Magazine capacity18161311
Max. shots per fill2201507540
Pellet Barrel twist rates1 in 17.71 in 17.71 in 241 in 28

The Red Panda Benchwill be available with a choice of pellet and slug barrels. The initial products being listed by Pyramyd carry the pellet barrel.

The Picatinny optics rail incorporates a 30 MOA cant, in line with the long-range shooting expectations for this gun. There’s also a bubble level at the rear to ensure repeatable, cant-free alignment when shooting.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air


As can be deduced from the photograph above, the Red Panda Bench design incorporates two regulators (hence the three pressure gauges). These regulators are externally-adjustable.

There’s also an externally-adjustable transfer port and hammer spring. The HPA cylinder has a capacity of 600 cc and a maximum fill pressure of 310 bar (4,496 PSI).

As can be seen from the photograph below, the two-stage match trigger has much potential for adjustment, too.

The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air


The stock is equipped with the expected adjustable cheekpiece and butt pad. It’s also possible to adjust the length-of-pull.

Up-front, the forearm features long M-LOK accessory rails for adding items such as shooting weights, bipods, and more.

Of course, a dedicated benchrest gun is going to be heavy. This Red Panda weighs-in at 16.8 Lbs, plus scope. The overall length is 42 Inches and the barrel length 28 Inches.

Karma Airguns has put together an introductory video on the Red Panda Bench. This gives a lot more information.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

No-one would expect this to be a “bargain-basement” air rifle. However the price of $2,350.00 seems competitive for what’s on offer with this soon-to-be-available new air rifle.

Karma Red Panda Bench PCP Air Rifle, Pellet Barrel 0.22
image-100159921-13713383



The post The Red Panda Bench Air Rifle Is Coming Soon At Pyramyd Air appeared first on Hard Air Magazine.
There are a few typos in the chart.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top