The American Air Arms EVOL 30 Is Back And Better!

The American Air Arms EVOL 30 PCP air rifle is back and better than ever. It’s in stock now at Airguns of Arizona.

Many Hard Air Magazine readers will be interested to hear that this new EVOL 30 incorporates a “cut rifling” barrel manufactured by Sub-MOA. It’s all about accuracy!

The elegantly-fluted barrel is threaded into a massive lug in the breech block. A chamber insert system is used to ensure the best transition into the rifling.

The Picatinny rail atop the action has an inclination of 25 MOA, for ease of sighting in long-range shooting.

Power output is set at 80Ft/Lbs from the factory, with 35-40 consistent shots available from one fill of the 300cc titanium HPA tube. However up to 100 Ft/Lbs can be achieved if you want to tune the gun appropriately.

Note that this is a pellet gun, being designed to shoot diablos and not slugs.

Importantly, the American Air Arms EVOL 30 PCP air rifle is entirely manufactured in the USA. Every part. Most parts are manufactured in Arizona and the gun is assembled there too!

The buttstock and pistol grip are Mil-spec Magpul components.

The trigger is factory-set for a crisp release at 8 to 10 Oz. There’s also an ambidextrous safety accessibly from both sides of the action.

There’s now an externally-adjustable regulator. This can be adjusted using the screw in the front of the air tube (below). The hammer spring tension can be adjusted also to balance the output.

A forcing cone stripper fits onto to the muzzle to reduce turbulence and the report of the rifle. However, if “backyard friendliness” is a priority, AAA has produced a Moderator adapter with a 1/2 x 20 UNF thread to which a dedicated airgun silencer can be attached. See the photograph below.

Additional 9-shot rotary magazines are also available, if desired.

There’s more information in Jared Clark’s video review below. It’s definitely worth a look!

BUY FROM AIRGUNS OF ARIZONA​

American Air Arms EVOL 30​

The post The American Air Arms EVOL 30 Is Back And Better! appeared first on Hard Air Magazine.

 

[American Air Arms]

I think it looks great! In black that is....the Ham pictures are clearly of the gun unfinished, that was my point. Give me a wood stock any day, but... I always wanted one black airgun too with not a spec of wood on it. My TX and Ghost are 10+ lbs scoped, easy guns to shoot offhand and hold steady....till my arms give out
Man I gotta try a .30 someday!

We made these barrels in two colors - Cerakote Titanium and Cerakote Graphite Black. None are unfinished. The Titanium looks very good in person, especially with the walnut Paradigm; pictures do not do it justice.