Others Off Hand Challenge 9/21/24 - 9/28

[Florida_Man]

Mine was probably set to “fit to page”
I always color inside the lines

 

[pan60]

Just show / state a " official" measure.. that easy to see and understand .. it's this or it's wrong kinda thing .. no guess work . Everything /one got a standard same size .

View attachment 8370
Then I guess if someone went to CRT diversity schools they can't read a tape or math anyway ..lol.

if everyone prints a PDF at 100% not a image we should all have the same size what I post was a copy of the PDF that had already been post I just moved it so we all had the same target

 

[Danman]

if everyone prints a PDF at 100% not a image we should all have the same size what I post was a copy of the PDF that had already been post I just moved it so we all had the same target

Yeah but it won't print....trust me I tried File was waaaay to big. @FL22 alerted me to that thankfully or I would have died trying....Or the printer would have

 

[Danman]

“Scar Face” HW95
Score 74/75 ?
Standing shooting off hand
View attachment 8283View attachment 8284

Just noticed your two 10 ring hits....lol almost identical to mine Good shooting! Fighting the natural inclination to rest your arm on something to brace was the hardest part for me Near the end I timed my swaying and pulled the trigger as barrel veered towards the bull.

 

[Hateful McNasty]

if everyone prints a PDF at 100% not a image we should all have the same size what I post was a copy of the PDF that had already been post I just moved it so we all had the same target

Ya, maybe . But if you have the 4 sizes you can easy be able to check it to insure it holds true not hope it is ..lol

Total diameter, black size , center. Ring width

Like 6" Target a 3" black part , 1/4" center and ring width 1/4"

Is it that difficult to add or do/ show ?

That way everyone is 100% sure if there able to measure/ read a tape..

Thing what I always find funny is you go to buy or download targets and that info is nowhere to be found in the descriptions.

Seems kinda important to me to insure consistant fairness . Not buy download or bring a lot of all over the place target sizes ..lol.

Even if you give your target to use you should post the ring dimensions so people can check to insure your all on the same level or consistent size for the match or challenge..

Don't ya think ?

How hard ? If this was the target to be used .

Now you can check your copy to be sure there sized right ., right?

 

[Hateful McNasty]

So I print one up to use I can check the f it's the same for the challenge everytime

 

[Florida_Man]

I’m content with a participation medal

 

[Hateful McNasty]

I’m content with a participation medal

I got them made up from something else if you want them .. let's see where or what one to start ???....

How bout this one ?


For myself for this I pat myself on the back a lot

I'll proudly hang that wall paper up and admire it forever

 

[Florida_Man]

I got them made up from something else if you want them .. let's see where or what one to start ???....

How bout this one ?
View attachment 8384

For myself for this I pat myself on the back a lot
View attachment 8388
I'll proudly hang that wall paper up and admire it forever

I like it. I only compete with myself now. I had to give up sim racing because it was becoming a stressor in my life. If I’m not dealing with family or work, whatever I’m doing needs to relieve stress.

Like throwing a ball for this goofball. She crashes into the fence at least once a week haha. A force of nature that demands the world bends to her.

 

[Hateful McNasty]

I like it. I only compete with myself now. I had to give up sim racing because it was becoming a stressor in my life. If I’m not dealing with family or work, whatever I’m doing needs to relieve stress.

Like throwing a ball for this goofball. She crashes into the fence at least once a week haha. A force of nature that demands the world bends to her.

I got one of them


Right now he's occupied with the new baby squirrels venturing out of there nests .. he's already drooling and licking his lips ...lol

Eyes peeled on every limb..

 

[Hateful McNasty]

I like it. I only compete with myself now. I had to give up sim racing because it was becoming a stressor in my life. If I’m not dealing with family or work, whatever I’m doing needs to relieve stress.

Like throwing a ball for this goofball. She crashes into the fence at least once a week haha. A force of nature that demands the world bends to her.

Ya, nothing like a good friend to goof around with ..

 

[pan60]

Yeah but it won't print....trust me I tried File was waaaay to big. @FL22 alerted me to that thankfully or I would have died trying....Or the printer would have

not sure who posted it but I printed it?
anyway the piont being save the targets to a pdf file so everyone gets the same file?
maybe it doesnt matter? I and not a 100% sure but with a pdf at 100% they will all be the same.
just my two cents.

I will be posting my attemp here soon started going a new scope on Sister but I found the rings I though I had I did have so I am going to put the old scope back on for now.
LOL
always something

 

[FL22]

if everyone prints a PDF at 100% not a image we should all have the same size what I post was a copy of the PDF that had already been post I just moved it so we all had the same target

I tried doing that but the PDF version will not print for me, so I did what I could.

Just noticed your two 10 ring hits....lol almost identical to mine Good shooting! Fighting the natural inclination to rest your arm on something to brace was the hardest part for me Near the end I timed my swaying and pulled the trigger as barrel veered towards the bull.

Thanks Dan.

I have a routine when plinking, starting standing bracing for a 25y then 50y finally moving to my 25y target for shooting 25y off the hand.

Obviously you have the skills to do it bro.
Maybe make it a routine .

 

[pan60]

I tried doing that but the PDF version will not print for me, so I did what I could.

Thanks Dan.

I have a routine when plinking, starting standing bracing for a 25y then 50y finally moving to my 25y target for shooting 25y off the hand.

Obviously you have the skills to do it bro.
Maybe make it a routine .

can you save the image you have as a pdf?
just thinking out loud.
how did you do the last one

 

[Hateful McNasty]

I guess as long as everyone printer scales everything the same . This new hp printer I got is the worse I ever owned .. it botches everything. Drinks ink like it's free and I got plenty to feed it. It's a print twice cause the first will never be correct ... (Hp2700 series. Worse HP ever). My old hobwas great and you hit print well.. it printed and nice. This one lol. Like pulling wisdom teeth to print anything ..

Anyway just need some specs on the targets to check to see if it's right or needs resizing to be correct .. that's all .

Print one and check . If it's right crank some out . Not crank a bunch to find there wrong sized ..lol.

 

[FL22]

can you save the image you have as a pdf?
just thinking out loud.
how did you do the last one

I got it from one of the other threads here on HAM, and used it extensively. I’m not gonna say who it was as they are super busy professionally and personally.

I have some other targets from that individual, but they just would not have made a good fit for this particular challenge.

So I was hoping to turn to this into more of a collaborative effort among those of us who want to be part of the Challenge.

 

[pan60]

I there there will be more of us participating has time goes on.
I wouldnt worry about but I do think we need to try a round up pdf targets.
maybe someone that know more that I do can make the file smaller? Ilike I said I just copied it from the other thread I just dont know enough about computer to do it. : (

 

[Hateful McNasty]

I got it from one of the other threads here on HAM, and used it extensively. I’m not gonna say who it was as they are super busy professionally and personally.

I have some other targets from that individual, but they just would not have made a good fit for this particular challenge.

So I was hoping to turn to this into more of a collaborative effort among those of us who want to be part of the Challenge.

Ya, but you still not given any measurements to check the target to keep everyone uniform and all..

Kinda like a legal description..lol.

20y on irons I'm using a 1-1/2" bull ( black part .. ) 3" overall . Seems to fit pretty good for that for me ..lol

Same as above but reduced to 3" instead of 6" ..


Thing was s that's not the point . It's have a way so we can check any target we print to all be the same . Not like early one guy full paged and the next guys not so.

Anyway I guess it's over the head on that
You shoot a 6" target I'll shoot a 3". The next guy shoots a 4-1/2" ..lol.

In the end the center of a circle is the center of a circle wether it's 1mm or 1 mile. And the center is what we're all aiming for in the end result ..

 

[FL22]

Ya, but you still not given any measurements to check the target to keep everyone uniform and all..

Kinda like a legal description..lol.

20y on irons I'm using a 1-1/2" bull ( black part .. ) 3" overall . Seems to fit pretty good for that for me ..lol

Same as above but reduced to 3" instead of 6" ..
View attachment 8402

Thing was s that's not the point . It's have a way so we can check any target we print to all be the same . Not like early one guy full paged and the next guys not so.

Anyway I guess it's over the head on that
You shoot a 6" target I'll shoot a 3". The next guy shoots a 4-1/2" ..lol.

In the end the center of a circle is the center of a circle wether it's 1mm or 1 mile. And the center is what we're all aiming for in the end result ..

I can’t measure it till I get home from work, probably Friday.

 

[Gramps-Too]

I printed the file @FL22 attached to the 1st post. I printer one as Letter & the other as A4. They do indeed print in different sizes. Scaling on both was set to 100% the only setting that was changed was the paper size. I measures the total width of both targets.
Letter 6. 13/16"
A4 7 9/16