Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

New JTS Brawn Air Rifle Now Shipping

1714078530787.webp

Hard Air Magazine readers first learned about the JTS Brawn air rifle in our report from the 2024 SHOT Show. Now it’s available from Pyramyd AIR in .22 caliber, .25 and .30 cal models.

There’s a .177 caliber version also, although Pyramyd tells us that this will likely be available in a month or so.

The JTS Brawn is an extension of the company’s Airacuda platform. Selling for $499.99 – or $529.99 for the .30 caliber version – it’s a competitively-priced addition to the burgeoning PCP air rifle market.

New JTS Brawn Air Rifle Now Shipping


As with the Airacuda Max, the Brawn combines a familiar mix of features. There’s a sidelever action, magazine feed, regulated HPA supply and shrouded barrel.

The specification summary reads as follows:

CaliberMax Shots/FillMax VelocityMag Capacity
.17735980 FPS12 rds
.2235900 FPS10 rds
.2535860 FPS10 rds
.3015830 FPS7 rds

Although the overall length is just 33 Inches, the weight is relatively high at 9 Lbs 5 Oz. That’s an indication of the “all wood and metal” construction of the Brawn. You can see the wooden cheekpiece surrounding the magazine in the photograph below.

New JTS Brawn Air Rifle Now Shipping


Also shown in this photograph is the regulated air pressure gauge on the side of the action. The tube (fill) pressure gauge is located at the front in a rearward-facing location. This gauge can be rotated to be visible from either side, depending if the shooter is right- or left-handed.

Barrel length is 17.2 Inches and there’s a 1/2 x 20 UNF adapter for installing an airgun-specific moderator where legal. Above the barrel is a Picatinny rail for scope mounting.

The manual safety is located inside the guard of the two-stage adjustable trigger, making for easy ambidextrous operation. Filling is achieved through a “standard Foster connector” and the maximum fill pressure is a handpump-friendly 3,190 PSI.

ham-brawn-1


The Brawn is supplied with two metal rotary magazines. It carries a 3-year warranty from the manufacturer.

BUY FROM PYRAMYD​

JTS Brawn Bullpup PCP Air Rifle 0.25​


The post New JTS Brawn Air Rifle Now Shipping appeared first on Hard Air Magazine.
 
View attachment 5963

Hard Air Magazine readers first learned about the JTS Brawn air rifle in our report from the 2024 SHOT Show. Now it’s available from Pyramyd AIR in .22 caliber, .25 and .30 cal models.

There’s a .177 caliber version also, although Pyramyd tells us that this will likely be available in a month or so.

The JTS Brawn is an extension of the company’s Airacuda platform. Selling for $499.99 – or $529.99 for the .30 caliber version – it’s a competitively-priced addition to the burgeoning PCP air rifle market.

New JTS Brawn Air Rifle Now Shipping


As with the Airacuda Max, the Brawn combines a familiar mix of features. There’s a sidelever action, magazine feed, regulated HPA supply and shrouded barrel.

The specification summary reads as follows:

CaliberMax Shots/FillMax VelocityMag Capacity
.17735980 FPS12 rds
.2235900 FPS10 rds
.2535860 FPS10 rds
.3015830 FPS7 rds

Although the overall length is just 33 Inches, the weight is relatively high at 9 Lbs 5 Oz. That’s an indication of the “all wood and metal” construction of the Brawn. You can see the wooden cheekpiece surrounding the magazine in the photograph below.

New JTS Brawn Air Rifle Now Shipping


Also shown in this photograph is the regulated air pressure gauge on the side of the action. The tube (fill) pressure gauge is located at the front in a rearward-facing location. This gauge can be rotated to be visible from either side, depending if the shooter is right- or left-handed.

Barrel length is 17.2 Inches and there’s a 1/2 x 20 UNF adapter for installing an airgun-specific moderator where legal. Above the barrel is a Picatinny rail for scope mounting.

The manual safety is located inside the guard of the two-stage adjustable trigger, making for easy ambidextrous operation. Filling is achieved through a “standard Foster connector” and the maximum fill pressure is a handpump-friendly 3,190 PSI.

ham-brawn-1


The Brawn is supplied with two metal rotary magazines. It carries a 3-year warranty from the manufacturer.

BUY FROM PYRAMYD​

JTS Brawn Bullpup PCP Air Rifle 0.25​


The post New JTS Brawn Air Rifle Now Shipping appeared first on Hard Air Magazine.
Anything else heard about this JTS rifle? I am looking at it now, and really liking what I see, but I would feel lot better if anyone has any hands on with it.
 
Rear lever mhaaaa, and that gauge sticking out I thought it was that Diana xr gun ..lol. Well maybe this is the pup model same manufacturer? Ijdk ... Lol
 
Rear lever mhaaaa, and that gauge sticking out I thought it was that Diana xr gun ..lol. Well maybe this is the pup model
That Guage sticking out is my one concern. I don't know how long that would last. Either cracked, or maybe accidentally knocked off. That's why I asking for any hands on experience.
Hateful, I have a thought. This can make everyone here on the page happy, and make you a PCP fan. If you will buy you a Crosman 3622, I have an excellent hand pump I will give you. I only used it a few times and it works perfectly. Now, you will never get a better deal than that.
 
That Guage sticking out is my one concern. I don't know how long that would last. Either cracked, or maybe accidentally knocked off. That's why I asking for any hands on experience.
Hateful, I have a thought. This can make everyone here on the page happy, and make you a PCP fan. If you will buy you a Crosman 3622, I have an excellent hand pump I will give you. I only used it a few times and it works perfectly. Now, you will never get a better deal than that.
I fl22 offered that deal already. The pump though I could fix my vortex rams in the hatsans that gone flat ..lol

( Notice I'm in no hurry to buy a pump even for that ..lol too close to be PCP guy .. oh, then a hatsan probe. ). See PCP does mean pay continue paying .. 😉
 
That Guage sticking out is my one concern. I don't know how long that would last. Either cracked, or maybe accidentally knocked off. That's why I asking for any hands on experience.
Hateful, I have a thought. This can make everyone here on the page happy, and make you a PCP fan. If you will buy you a Crosman 3622, I have an excellent hand pump I will give you. I only used it a few times and it works perfectly. Now, you will never get a better deal than that.
I fl22 offered that deal already. The pump though I could fix my vortex rams in the hatsans that gone flat ..lol

( Notice I'm in no hurry to buy a pump even for that ..lol too close to be PCP guy .. oh, then a hatsan probe. ). See PCP does mean pay continue paying .. 😉
Then I forgot probably the adaptor for the probe to fit the pump connector. See even more pay continue paying .. it never ends with PCP .lol
 
I fl22 offered that deal already. The pump though I could fix my vortex rams in the hatsans that gone flat ..lol

( Notice I'm in no hurry to buy a pump even for that ..lol too close to be PCP guy ..)
You, are hilarious in your obstinance! I read replys looking for your reasons to stay away from pcps. One of these days, you gonna slip up and come to the dark side, even if for the cake, and your air gunning life will change. Hahahahaha. Well, glad I wasn't the only one to offer you a free pump anyway. I figured that might sway you a little bit. Can't say I didn't try anyway
 
I fl22 offered that deal already. The pump though I could fix my vortex rams in the hatsans that gone flat ..lol

( Notice I'm in no hurry to buy a pump even for that ..lol too close to be PCP guy .. oh, then a hatsan probe. ). See PCP does mean pay continue paying .. 😉
Sounds like you need to feed those leaky hatsans some viagra. Are the ones with the gas rams as problematic as I have read?
 
Hateful if my cheap @ss can break down and buy a PCP, anybody can!
And you don't have to abandon springers just cause you have PCPs!
plus one.
I still enjoy my pump guns and still search for them and buy them but not I just clean. em up make em shoot then then toss em in the pump gun collection because when I am going to shoot or hunt it aint with the pump.
: )
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top