Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Here’s What Top Quality Riflescope Mounts Look Like

Here's What Top Quality Riflescope Mounts Look Like

Today we’re examining what top quality riflescope mounts look like. There’s endless discussion and articles about “the most accurate” airgun and that extends to “the best” scope and pellets, too. But precision shooting requires a complete system solution: and that solution is only as good as it’s weakest link.

As we examine all the parts of that precision shooting solution, there’s one that is rarely discussed. It’s scope rings (or mounts). Now there are some top quality riflescope mounts available and today we’re looking at this offering from Wolfiek Group. They are available for 30mm and 34 mm diameter tube scopes.

HAM-Mount-10.jpg


First, let’s get price out of the way. These Wolfiek Group one piece scope mounts cost $269.00. Sure, that’s expensive, however it’s in line with the pricing of similar high-end products from other manufacturers. Precision design and manufacturing never was cheap!

Francisco Eizayaga, the Managing Director and founder of Wolfiek Group, is a keen competitor and accomplished airgun shooter. At Extreme Benchrest 2026, I spoke to him about Wolfiek’s One Piece Scope Mounts that were on display there.

Here's What Top Quality Riflescope Mounts Look Like


Francisco explained that he is convinced of the importance of having a good set of scope rings. “Even if your optics are top tier, you won’t get the expected results unless you match them with top quality mounts.” He emphasized to me.

“So in order to provide mounts that live up to the expectations of the most demanding shooter – like me! – Wolfiek Group took it upon ourselves to make them.”

A quality product starts with the packaging. So you’ll find Francisco’s scope mounts packed in a high quality box. The cut foam inner not only looks good, it provides protection against any rough handling in transit to the customer.

HAM-Mount-1.jpg


These Wolfiek mounts are CNC-machined from 7075-T6 Aluminum. Often described as “aircraft grade”, this is one of the highest-grade (and most expensive) Aluminum alloys, providing a strength comparable to some mild steels at around 30% of the weight. A black anodized finish protects the material from any possibility of corrosion.

To enhance suitability for long-range shooting, these mounts have a built-in 30 MOA angle. The attention to detail is such that this is even machined into the underside of the mount body, as we see below.

HAM-Mount-2.jpg


Backed by high-precision machining, the one-piece design offers a guarantee of precise scope alignment onto the Picatinny scope rails present on your air rifle.

Here's What Top Quality Riflescope Mounts Look Like


Another indication of high standards and quality control is that the top and bottom halves of each ring are serialized to each other. (The other pair of this set are marked “0021-1”).

This ensures that the owner – you and me – always have the ring tops mounted against the ring lowers and the right way round. When you’re looking for top quality riflescope mounts, this is the sort of detail you need!

HAM-Mount-5.jpg


We all know how the top halves of cheap scope rings can be – as my Dad used to describe it – “a rattling good fit”. Well, that’s not the case here. The halves fit and align perfectly, both with each other and around the scope tube.

Although the main structure of these Wolfiek mounts is manufactured from 7075-T6 Aluminum, the clamping crossbolt, base and nut are actually machined from stainless steel. Ditto the screws and nuts. That will will provide the most reliable hold on your rifle’s rails, Francisco explained to me.

HAM-Mount-3.jpg


To help prevent cant when shooting, the Wolfiek mounts incorporate a built-in bubble level. The shooter can reference this by a brief glance down at an appropriate point just before firing.

HAM-Mount-4.jpg


And yes, you can see this bubble level when using the mounts – although it’s not so easy to photograph that fact, as we see below!

Here's What Top Quality Riflescope Mounts Look Like


Francisco talked to me about how the Wolfiek mounts are machined to extremely tight tolerances. That ensures superbly smooth surfaces that allow for precise mating between the scope tube and the ring’s base.

Again, that’s difficult to photograph, but let me add that a “finger test” definitely confirms the glass-like surface of the scope contact areas.

HAM-Mounts-7.jpg


Finally, and as you would expect, Wolfiek provides clear specifications for the maximum torque to be applied when using these mounts. It’s 30 Inch-Lbs for the ring screws and 70 Inch-Lbs for the base mounting screws.

So you’ll need a precision torque wrench too, to complete the installation properly. If you don’t already have one, there’s another potential weakest link in the system to be corrected…

BUY FROM WOLFIEK GROUP
One Piece Scope Mounts​


The post Here’s What Top Quality Riflescope Mounts Look Like appeared first on Hard Air Magazine.
 
I have long tried to use quality rings for my scope mounts. Price alone cannot be trusted as my only clue. I've long been using Sportsmatch or BKL duel or single rings. Yet STILL, I've had the rings move to the point of having twice snapped off a stop pin. Both times this happened on my supposedly gentle recoiling TX200. The mounts that I've been using are in the just barely sub $100 range, so certainly not in the same class as these offerings from Wolfiek. Any assistance here will be appreciated. Orv.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top