250Z Max reg pressure for stock components?

[BSJ]

What's the maximum reg. pressure I can realistically expect with the stock components of a .22 250z?

 

[Bladefin]

I'd think that max on the reg isn't what one would be looking for. Too many variables.

Projectile weight and finding the grouping at a psi and hammer setting. I mean you could crank the reg to 3k psi, have it wasting air, be loud as he ll and shoot a buckshot pattern.

 

[airgunnerd]

From a practical perspective, the hammer generally runs out of steam going past 2500 psi in the stock configuration regardless of the hammer spring setting. Power starts to retrograde past that without modifications.

Like Bladefin said, you can certainly physically crank up the regulator past that. Without modifications, you wouldn't see any benefit in doing so.

 

[BSJ]

From a practical perspective, the hammer generally runs out of steam going past 2500 psi in the stock configuration regardless of the hammer spring setting. Power starts to retrograde past that without modifications.

Like Bladefin said, you can certainly physically crank up the regulator past that. Without modifications, you wouldn't see any benefit in doing so.

Just what I wanted to know! Thanks