.22 JTS Pellets

[Soren Drost]

I cannot confirm this but have heard they're produced in the same facility as the qaing yuan pellets?

Thought they were American made ??!?

 

[CTAirgunner]

Thought they were American made ??!?

I don't think that JTS has ever advertised as made in USA.

But...

I could be mistaken

 

[Soren Drost]

I don't think that JTS has ever advertised as made in USA.

But...

I could be mistaken

Not much is Made In America any longer

 

[Spanky]

Has anyone used the 22 grain .22 here yet?

I have some here, I haven’t had a chance to try them yet. I also have a tin of the 21.?? With the clipped domes. I’ll probably try them in my Prophet 1 with the RPB barrel.

 

[GHairgunner]

I have shot both the 22cal 25gr and the 25cal 34gr and have found them to be equal to or better then the similar JSB. The 25cal was great when I slowed it down a bit it came a live. Still working on speeds for the 22 but I was never a fan of the high 900FPS I'm thinking success will land closer to 950-940FPS. Sorting the JTS is easy as 90% of the tin is the same weight and the diameters are very equal. Talked to JTS at RMAC and it would seem their tooling build the pellet is different then JSB. Hopefully their quality continues to remain very high.

 

[Centercut]

I’ve spent some more time with the .22 cal 25.4 grain clones of the JSB RD Monsters. I previously posted they were very good in my initial snap shot evaluation.

I still think they are good, but certainly no better than the equivalent JSBs. I’ve shot them side by side in my .22 Daystate RW HP. What I found was that at 100 yards, out of every ten shots I’d get one an inch or two low. Not a bad flyer, but lower than it should have been. I have shot them on three separate occasions, and have noticed this every time. Oddly enough, the RD Monsters I was shooting were a very good batch and I observed no flyers from them.

And even if the two were equivalent, I’d expect the new kid on the block to come in at a lower price and not match the current champion in price. Not sure of this strategy? They are close enough that my recommendation is to at least give them a try…

 

[BanjomanMI76]

I asked Travis from JTS recently on another forum when the .177 pellets would be available. Soon he said as they are working on some quality issues. After shooting some .22s in my Marauder and Discovery I was impressed and I am sure the ,177s will shoot as effectively.

 

[Hateful McNasty]

China made at European made pricing ?

That can make for a nice profit margin..

Though there all heavy 18+gr $20 for 500 . Ill stick to cphp

 

[Spanky]

Has anyone used the 22 grain .22 here yet?

Finally shot some today, kinda windy. I turn my Prophet down from MRD’s, to a random 890fps. First round dead center, no joke! First ten shots from gun at 52 yards. Very snug loading, skirt seems wide, but impressive so far!

 

[CTAirgunner]

Finally shot some today, kinda windy. I turn my Prophet down from MRD’s, to a random 890fps. First round dead center, no joke! First ten shots from gun at 52 yards.View attachment 1123View attachment 1124

Holy smokes man that is impressive!!!