Panthera FX Bull barrel for Panthera

[Auto1191]

That’s a little disturbing about the Bull Barrels. I’m starting to think that UA may have misinformed me about the Solud Barrel not fitting the Panthera - hopefully so.

The BULL BARRELS are the only BARREL that will fit the Dynamic Platfotm, NO GO FOR THE SOLIDS. IN the video he has a BULL BARRELI will make ! more phone call today , to make sure about the solid barrels, I will also see if their are part # s for solid fitmint .22 & 30 if the solids will work TRUTH BE TOLD

 

[Billm]

Thank you for the information. Hopefully, they will work out the snags with the Bull Barrels. As a side note: I’m getting very good accuracy with the Panthera MKII using the pellet liner and the AEA pellets and slugs at 135bar, at around 960fps. My point being: all is not lost while we wait for the elusive Bull Barrels. If the Bull Barrel really improves the accuracy/consistency of the Panthera MKII, it will just mean that a very good shooting air rifle will become an exceptional air rifle for the price.

 

[Solo1]

Now here’s a barrel change on a panthera mki but this is the stock barrel for the mkii also

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Note the transfer port which is the same as the port shown in the solid barrel pic from fx

 

[Auto1191]

Thank you for the information. Hopefully, they will work out the snags with the Bull Barrels. As a side note: I’m getting very good accuracy with the Panthera MKII using the pellet liner and the AEA pellets and slugs at 135bar, at around 960fps. My point being: all is not lost while we wait for the elusive Bull Barrels. If the Bull Barrel really improves the accuracy/consistency of the Panthera MKII, it will just mean that a very good shooting air rifle will become an exceptional air rifle for the price.

That's great I had my reg at 135 Bar as well, do you have a slight ping when firing . & are you using the 50.5 graim pelltets. Pellets are great, don't fall down the rabbit hole with slugs.

 

[Auto1191]

Now here’s a barrel change on a panthera mki but this is the stock barrel for the mkii also

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

View attachment 22000
Note the transfer port which is the same as the port shown in the solid barrel pic from fx

I am waiting for return phone call to confirm Barrel fitment in both .22 & 30 cal to help my fellow Panthera owners & put all this grief to bed on the SOLID BARRELS & BULL BARRELS. THIS COULD GET UGLY FX is GREAT @ marketing, BUY this BUY that OH YEA buy this to. I hope I was not mislead about the SOLID BARREL- fitting my PANTHERA to calm myself down , because the BULL BARREL was still not available since it was ordered back in March, still @ the place I purchased the rifle from. I never took ownership yet & it is pre-paid in FULL. I made this purchase solely to have the BULL BARREL on the PANTHERA. I have every right to be Dis gruntled , Is it the end of the WORLD absolutely not I will move on. March 26 2026 the Panthera arrived @ the Dealers door

 

[Solo1]

This is from the fx web site for barrel kits

FX DYNAMIC BARREL KIT​

Configure your FX Dynamic, Panthera, or King to match your exact shooting requirements with a complete barrel kit solution. Select your preferred barrel length featuring the STX Superior liner for optimal accuracy and consistency. The kit includes a caliber-specific probe, a matching plenum optimized for the chosen barrel length, and a dedicated shroud—ensuring balanced airflow, efficiency, and seamless performance.

 

[Billm]

That's great I had my reg at 135 Bar as well, do you have a slight ping when firing . & are you using the 50.5 graim pelltets. Pellets are great, don't fall down the rabbit hole with slugs.

I shoot both. But, I mostly shoot the 50.5gr pellets. I mostly hear the hammer.

 

[Auto1191]

I shoot both. But, I mostly shoot the 50.5gr pellets. I mostly hear the hammer.

Your tune must be great

 

[Auto1191]

This is from the fx web site for barrel kits

FX DYNAMIC BARREL KIT​

Configure your FX Dynamic, Panthera, or King to match your exact shooting requirements with a complete barrel kit solution. Select your preferred barrel length featuring the STX Superior liner for optimal accuracy and consistency. The kit includes a caliber-specific probe, a matching plenum optimized for the chosen barrel length, and a dedicated shroud—ensuring balanced airflow, efficiency, and seamless performance.

I think you are on to something for sure ! I went on FX website put my info in 20894 came up , but I think this is the standard Barrel & liner not the SOLID

 

[Billm]

Your tune must be great

I just think that the gun is inherently accurate and could be better without the velocity swings. I shot these two groups yesterday. Same aim point in a 10-15mph crosswind. Slugs and pellets, exact same settings.

 

[Billm]

I just received an apology from Utah Airguns. The SOLID BARREL DOES FIT THE DYNAMIC BLOCK. I’ve attached their text. I apologize for any misinformation that I may have contributed to. Hopefully it’s now a dead issue and no hard feelings.

 

[Auto1191]

I just received an apology from Utah Airguns. The SOLID BARREL DOES FIT THE DYNAMIC BLOCK. I’ve attached their text. I apologize for any misinformation that I may have contributed to. Hopefully it’s now a dead issue and no hard feelings.View attachment 22002

So their is still Hope. I know the feeling I posted some info yesterday but I deleted it because I wasn't 100 % sure. Enjoy your .30 cal looks like your doing well. calm days are always better , but the wind could be challenging @ times

 

[Solo1]

I think you are on to something for sure ! I went on FX website put my info in 20894 came up , but I think this is the standard Barrel & liner not the SOLID

Correct but what i really wanted to show was that everything is the same on the port end as the solid (thick metal and liner)barrel

 

[Solo1]

I just received an apology from Utah Airguns. The SOLID BARREL DOES FIT THE DYNAMIC BLOCK. I’ve attached their text. I apologize for any misinformation that I may have contributed to. Hopefully it’s now a dead issue and no hard feelings.View attachment 22002

No hard feelings Bill i just couldn’t understand why you weren’t getting what i was saying. Like i said too the guys at ua on the phones all seem to be new and aren’t with it yet

 

[Auto1191]

No hard feelings Bill i just couldn’t understand why you weren’t getting what i was saying. Like i said too the guys at ua on the phones all seem to be new and aren’t with it yet

OK these are the part #s .22 700mm SOLID BARREL 22212 & FOR .30 CAL 22220 COMES with TRANSFER PORT. As for the BUU BARRELS I Don't know.

 

[Auto1191]

I just think that the gun is inherently accurate and could be better without the velocity swings. I shot these two groups yesterday. Same aim point in a 10-15mph crosswind. Slugs and pellets, exact same settings.View attachment 22001

No hard feelings @ all. We all are working together to figure it all out. BILLM

 

[Billm]

No hard feelings @ all. We all are working together to figure it all out. BILLM

I apologize again LOL, I did not Sh*t any groups, I shot them

 

[pan60]

I apologize again LOL, I did not Sh*t any groups, I shot them

I was hoping thats what you ment : ) LOL

 

[hameditor]

I apologize again LOL, I did not Sh*t any groups, I shot them

For the first time ever, I edited a post in the HAM Community. It was to change the "i" to an "o" in your post. No apologies necessary, we all make typing mistekes

 

[pan60]

For the first time ever, I edited a post in the HAM Community. It was to change the "i" to an "o" in your post. No apologies necessary, we all make typing mistekes

funny I edited the quote. LOL