funny thing happend to me

[larry069]

I got a new ultra valve and barrel clamp for my DW so I went to my work bench and installed it , I started to fill it with air and charge the battery and while I was waiting I thought it would fill the mag with some pellets so I got the tin and set it down next to my gun and air compressor I did not have much room and wanted to keep the tin away from the fan on the compressor so I thought where I put it was ok , well I was wrong and when I removed the lid I dropped the foam protector and would you know it the fan sucked it in and shread it to bits in a second, it sucked it in so fast I could not even see it , one second it was there the next gone lol it made it through the gard and sent it all in my compressor ! and the fan kept going like it was no big deal I had to remove the cover and only found one pice of it left the rest gone ! still works like new I got lucky on that one .

 

[Pumacarl]

Nice! At least they're still makng fans like they use to, but yeah, you got lucky with that.

 

[PapaT]

Read this right after moving curtain away from my compressor during fill... glad it's still okay.

 

[dunz]

With my OCD I'd still be searching for the rest of it. Glad it didn't jam things up or melt down inside your compressor. Events like these always freak me out.

 

[Dogowski]

I got a new ultra valve and barrel clamp for my DW so I went to my work bench and installed it , I started to fill it with air and charge the battery and while I was waiting I thought it would fill the mag with some pellets so I got the tin and set it down next to my gun and air compressor I did not have much room and wanted to keep the tin away from the fan on the compressor so I thought where I put it was ok , well I was wrong and when I removed the lid I dropped the foam protector and would you know it the fan sucked it in and shread it to bits in a second, it sucked it in so fast I could not even see it , one second it was there the next gone lol it made it through the gard and sent it all in my compressor ! and the fan kept going like it was no big deal I had to remove the cover and only found one pice of it left the rest gone ! still works like new I got lucky on that one .

I thought things like that only happen to me! Lol

 

[Mike Brown]

Makes me think I should take a close look at the fan on my compressor....I haven't paid that much attention to it's surroundings when I've been airing up the PCP's.

 

[pan60]

With my OCD I'd still be searching for the rest of it.

lol
plus one

 

[Dogowski]

lol
plus one

Me too! Lol

 

[larry069]

you would think a small fan like that would have not been able to suck something in but it does and spins fast, it pulls alot of air in and out and does its job real good at keeping the compressor cool but it is loud