Search results

Done! 👍😀

Consider not using the baffles and shroud at all. I’m working on a 177 Marauder project for Field Target use and the goal is repeatable and ultimate accuracy. I’m using a slip-on Donny FL adaptor and 3D printed moderators, that are the result of working with Old Spook for 2-1/2 years. The...

Actually, the new design dome pellets, shoot quite well in some rifles I own. They are clean, consistent and accurate, and I don’t throw away a notable portion of the tin because they’re dented.

I had a beautiful classic Leshiy in blue, which originally showed up with a standard 22 caliber barrel. I set the trigger up with a spring plunger and it was a hoot of fun! Later I bought a longer 25 caliber barrel and shroud setup, which I used for coyote hunting. Yes, it was lethal, with head...

That explains why we’re still waiting for the hammer/spring assembly for the 2021 Challenger. Parts must have been shipped to AR. 🤔😀

If you’re interested, try a moderator designed and made by Old Spook. Nice quality, really pays attention to detail and they are accurate. I’ve been working with him since early 2022 as a pseudo, consulting Engineer, plus doing thousands of rounds testing of prototype moderators. And for the...

I’ve been a member almost since the beginning, but thank you anyhow. 👍😀

Try the JTS 21.5gr, semi-dome, at anywhere between 900 to 950 ft/sec. My Ghost really likes this pellet.

Years ago I purchased a barrel band that looked much like the stock Marauder barrel band, except it was threaded with 3 holes, symmetrically around the shroud circumference area and included 3, plastic tipped set screws for each hole. The barrel band is installed just like the stock one and I...

Yes, same here. Apply a small amount of CA glue and shove the magnet tightly back into place.

My only complaint is, the rifle is loud at ear level. Has a noticeable loud snap, pretty much regardless of caliber or power level. I actually wear an ear plug in the right ear. Have done a lot to try and improve this issue. Changed pellet probes, breech seals, barrels, power settings and more...

Yes, you are biased, but well deserved. After putting over 10,000 rounds through this little treasure, I can confidently say, good job!

Check Donny FL for an adapter that will screw directly to the end of the Challenger barrel. As for a moderator or very effective air stripper, contact Old Spook on many of the public forums. In fact, I’ll contact him and forward a direct link to this thread. Here is my Challenger with some eye...

Take a look at the UTG Compact, 4-16.

Great video. Thank you!

In the past two years I purchased 3 Wika gauges. One was DOA and would not register any pressure, the other lasted about 1 month and began venting/leaking and the third is still working. No, I didn’t return the 2 failed ones. They were made into hanging targets to be shot at offhand. I get some...

Omega Turbo compressor and definitely worth the money. 168 hours and had one issue which we repaired readily. Operates quietly and fills quickly, but not too fast as to generate excessive heat due to compression.

I have a Leshiy 2, purchased new in 30 caliber x 350mm barrel, in early January 2022, then later bought a .22 x 350mm barrel and 2, .22 mags. The rifle was also originally bought with the 300cc bottle, Huma Mod50 moderator and an extra 30 caliber mag. All well worth the extra money. The rifle...

The force is strong to buy one!

I’ve tested the new 10.5’s extensively and they are definitely NOT the same pellets. Different look to them, cleaner, notably higher BC and much improved accuracy.