Murfdurf82
HAM Sniper
Hey folks is there a caliper anyone would recommend for good accuracy. I plan on doing a little porting and don't want to buy something I'm going to regret.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Can you tell us what you intend to measure? Is it - for example - inside diameters of small holes, external diameters, lengths, or all of the above - maybe more?Hey folks is there a caliper anyone would recommend for good accuracy. I plan on doing a little porting and don't want to buy something I'm going to regret.
I like pin gauges also for small internal diameters. I have much more success with them than other methods.I like the small hole gages and a caliper
I am a fan of Starrett or Brown and sharp but there are others that are just fine
for really small hole I use a pin set and you want to thank go no go
you can probably find a import set of gages and even pin set pretty cheap
As a machinist I use pin gauges. Especially with anything I’ll be drilling a hole into.Hey folks is there a caliper anyone would recommend for good accuracy. I plan on doing a little porting and don't want to buy something I'm going to regret.
If you don’t have pin gauges is this absolutely an acceptable alternative and a clever one at that.For small internal diameters I often use drill bits. My brother was a mechanic and I got a pristine, never used, complete, drill index with something like 200 different bit sizes up to 1/2" that I have checked with my Starrett calibers, and they are as marked. Handy to have.
You a machinist in disguise haha?!? You described SOP in the shop I work at. Only difference is we use micrometers for OD’s as calipers aren’t precise enough but for airgun purposes they would work just fine.I like pin gauges also for small internal diameters. I have much more success with them than other methods.
That's all I have ever used.For small internal diameters I often use drill bits. My brother was a mechanic and I got a pristine, never used, complete, drill index with something like 200 different bit sizes up to 1/2" that I have checked with my Starrett calibers, and they are as marked. Handy to have.
We use essential cookies to make this site work, and optional cookies to enhance your experience.