Others Brocock Commander XR Fill Pressure

[Hvacguy]

Those that have one, what do you fill to? Manual says 200 bar, BRK FAQ says 240 bar, others online say 250 bar.

https://brocock.co.uk/wp-content/uploads/2023/06/BRK-XR-HANDBOOK-2023-.v1.pdf

https://brocock.co.uk/support/#faqs

 

[Hvacguy]

Contacted Brocock, they confirmed 250 bar. The manual is confusing because there's an asterisk saying XR is 200 bar, but apparently there's a just "XR" model

 

[pfddi]

250 is the max although the cf bottle is rated to 300. I usually fill mine no more than 85% of the manufacturer's rating to keep things a bit more on the "conservative" side to avoid unnecessary work on the guns!

 

[Ezana4CE]

Those that have one, what do you fill to? Manual says 200 bar, BRK FAQ says 240 bar, others online say 250 bar.

https://brocock.co.uk/wp-content/uploads/2023/06/BRK-XR-HANDBOOK-2023-.v1.pdf

https://brocock.co.uk/support/#faqs

@Hvacguy I fill my Brocock Bantam Sniper HR to 250 bar. I have also found conflicting info about the fill pressure online.

 

[Luis Leon]

Those that have one, what do you fill to? Manual says 200 bar, BRK FAQ says 240 bar, others online say 250 bar.

https://brocock.co.uk/wp-content/uploads/2023/06/BRK-XR-HANDBOOK-2023-.v1.pdf

https://brocock.co.uk/support/#faqs

I fill my Pathfinder, which is basically a Mini Commander to 250 BAR…

 

[pan60]

I peg my wifes atomic
all the way to the top

 

[Hvacguy]

I peg my wifes atomic
all the way to the top

250 bar you mean?

 

[Luis Leon]

250 bar you mean?

Both my Atomic XRs are topped to 250 BAR as is my Ghost… All four of my BRKs to 250 BAR….

 

[pan60]

250 bar you mean?

I dont have my glasss and I am half blind so I mean the needle as far as it will into the red. no clue what that is because I would have to find a magnifying glass to see it.
when I fist got it I was only going to the green and I was only get 1 magazine and the rep told me to fill it all the way into the red.
so I do.

 

[pan60]

here we go
so I guess it is 250 : )

 

[Ezana4CE]

@Hvacguy I fill my Brocock Bantam Sniper HR to 250 bar. I have also found conflicting info about the fill pressure online.

250 bar is the maximum I fill mine. 220-240 bar is a comfortable range for me. I had a reg issue once. IIRC once the fill pressure was above 240 bar it would push my regulator's set pressure up. I developed a habit of filling below the maxilla pressure even after I installed a new reg.