Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Others Zelos Sound levels?

Hylander

HAM Sniper
283
989
Country flag
Has anyone done a decibel test on the Zelos.
Without and with a Moderator?
Also is there an inexpensive meter that is good, I'd like to test my guns, just for curiosities sake.
 
First I have not tested a Zelos and can’t help you there. Inexpensive sound pressure meters are great for general comparisons between your own guns. Unless you spend the money on a lab certified meter, the numbers mean very little between meters. The other issues that you run into are the sound weighting for sampling.. most sub $300 meters only have slow and fast weighting. For measuring airguns you really need impulse weighting which is usually at least four times faster sampling than the “fast” setting on most inexpensive meters. Without the impulse weighting, the loudest sound pressures are already decaying before your meter actually captures a reading. In simple terms: your cheaper meter is not indicating the actual max sound reading. The sound comes and goes before the meter has a chance to pick it up. I still have a cheap meter, because it gives me a rough idea of which rifle/mods work the best for me. But almost every rifle I have tops out at around 110db unmoderated, and all moderate down to around 88db. Those numbers are with a sub 40db ambient noise level. That makes me think that it’s not indicating the true value at either end. The audible difference is perceptible to the ear, but not to the meter. I’m not a sound engineer, so take my post for what it is: non-calibrated opinion. My guess is that the approximate 88db reading is probably mechanical noise of the gun and the meter is no longer picking up the higher levels of the muzzle blast. In my case I bought a cheap one off of Amazon. In most cases, the cheaper ones are probably using the same guts.
 
Over the years, I have spent quite a lot of time investigating sound meters. The net result is that I have not been able to identify a solution to generate consistent, repeatable measurements that we could use for HAM reviews 😢

Now this may not be due to any failing of the noise meter itself. One issue is where the meter is placed relative to the sound source. Another is the amount of noise being reflected from (primarily) hard surfaces like walls, ceilings etc. Yet another may simply be operator error!

Plus there's issues related to background noise, settings etc as outlined by @Billm .

All-in-all, it's not as simple to measure sound as it seem it might be. Not in my experience, anyway. But I'm always willing to learn from other HAMsters who are better at this than me...
 
Over the years, I have spent quite a lot of time investigating sound meters. The net result is that I have not been able to identify a solution to generate consistent, repeatable measurements that we could use for HAM reviews 😢

Now this may not be due to any failing of the noise meter itself. One issue is where the meter is placed relative to the sound source. Another is the amount of noise being reflected from (primarily) hard surfaces like walls, ceilings etc. Yet another may simply be operator error!

Plus there's issues related to background noise, settings etc as outlined by @Billm .

All-in-all, it's not as simple to measure sound as it seem it might be. Not in my experience, anyway. But I'm always willing to learn from other HAMsters who are better at this than

Over the years, I have spent quite a lot of time investigating sound meters. The net result is that I have not been able to identify a solution to generate consistent, repeatable measurements that we could use for HAM reviews 😢

Now this may not be due to any failing of the noise meter itself. One issue is where the meter is placed relative to the sound source. Another is the amount of noise being reflected from (primarily) hard surfaces like walls, ceilings etc. Yet another may simply be operator error!

Plus there's issues related to background noise, settings etc as outlined by @Billm .

All-in-all, it's not as simple to measure sound as it seem it might be. Not in my experience, anyway. But I'm always willing to learn from other HAMsters who are better at this than me...
You could always purchase the Model 821IH-QPR, it’s designed for measuring firearms. It’s only the same price as a nice match PCP or $4000 each. I guess that’s why my $40 meter doesn’t stack up lol.
 
You could always purchase the Model 821IH-QPR, it’s designed for measuring firearms. It’s only the same price as a nice match PCP or $4000 each. I guess that’s why my $40 meter doesn’t stack up lol.
Oh, only $4 Grand! I'll rush out and buy two or three immediately. Thanks for the recommendation :D
 
Well poo,
I was hoping ya'll would say, here is a link to download a free phone app and it would work great.
I guess I'll just keep trusting my ear meter.
 
My experience tells me that sound level measurements are subjective. What one person perceives as "loud" another might consider "backyard friendly." Context also plays a huge role. For example, a "fart" might be considered loud here in Pasadena, but the sound of "a Texan off the back porch" would be totally normal in other places. So, to answer your question, it just depends.
 
In order to keep them from being a step above worthless I think it's important to have something loud as a comparison. In many cases what sounds loud from our shooting position might not even be audible from 40 yards downrange. In my own experience with backyard activities it's the pellet /slug hitting the backstop that causes higher decibel reading than the actual shot.
 
I used a RTA app on my phone before I pitched the DB meter. It was really accurate for free.
I can not remember the name. New phone.
But searching RTA in a app store shows a few free ones.
I tried a free app this morning.
It would not pick up the shot or clapping, only slower noises.
Then it decided to give me a pop up that said your device is infected with porn, so click here to fix.
Uninstalled emedeitly.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top