Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

NOE Black Friday Sale

Chief55

HAM Expert
777
3,969
HAM Points
4,574.75
Umarex USA - 20% discount
Country flag
Some of you that are interested in casting bullets may not be aware that NOE has all of their molds on sale for 25% off through 12/01/2024.

I got a .25 - 34 grain dome pellet mold and a .217 - 24 grain dome pellet mold. These molds come with 3 sets of pins so you can actually cast 3 different weight pellets from each mold.
 
Some of you that are interested in casting bullets may not be aware that NOE has all of their molds on sale for 25% off through 12/01/2024.

I got a .25 - 34 grain dome pellet mold and a .217 - 24 grain dome pellet mold. These molds come with 3 sets of pins so you can actually cast 3 different weight pellets from each mold.
What is the accuracy of the pellets? Do you find them to be better then store bought? How is the fouling in the barrel?
 
Some of you that are interested in casting bullets may not be aware that NOE has all of their molds on sale for 25% off through 12/01/2024.

I got a .25 - 34 grain dome pellet mold and a .217 - 24 grain dome pellet mold. These molds come with 3 sets of pins so you can actually cast 3 different weight pellets from each mold.
Link please. I need to look into this for my Taipan, I have been saving used and junk ammo for a while.
 
In that I just purchased the molds I don’t have a clue. They haven’t got here yet. I have read that some people like them. It will depend on the gun and velocity. My guns like heavy pellets. No I don’t expect them to be better than JSBs but I hope they will be good enough for casual plinking and give purpose to the 60+ pounds of lead I have on hand.
 
I own the .22 "Hunter" pellet. From used lead (90% JSB probably) it throws pellets that weigh about 19.6-19.8grains. It takes some finesse to get it to make good pellets but they end up being quite consistent in weight once the temps are figured out. Most .22 barrels that I've tried them with shot them only "okay." The standout was a .22 Red Wolf Standard barrel and it would shoot 3/4" groups @ 55 yards. The other barrels were 1.5" groups at 55 yards. Past that for distance and it only goes downhill.

I was recently sent some of the heavier "Hunter Magnums." What I was sent weighed 23grains and look very much like a .22 Monster RD from JSB, but with a slight meplat.
The 23 grain Magnum Hunters seemed to do better than most of my attempts with the 19.6grain Hunters.
Here are some groups at 53 and 100 yards. The 100 yards were stringing vertically, and seemed to coincide with slightly tighter fitting individuals.

I measured BCs and the actual BC is nowhere near as optimistic as the technical drawing estimates. I don't remember exactly right now but it was something like 0.042. Not any better than the .22/18.13 made by JSB.
Screenshot_20241126-221750.webp

So, my conclusion of both weights of NOE pellets is that they make "okay" hunting or plinking pellets, but don't expect stellar accuracy from them. I kept my 19.6grain Hunter mold, and have enough lead from collected pellets to shoot for the rest of my life (and probably my son's), regardless of what the future holds. I figure if it gets to the point that a guy can't buy lead pellets, I'll be happy to have something to make my own, even if they're not as accurate as what we can buy now.
 
I own the .22 "Hunter" pellet. From used lead (90% JSB probably) it throws pellets that weigh about 19.6-19.8grains. It takes some finesse to get it to make good pellets but they end up being quite consistent in weight once the temps are figured out. Most .22 barrels that I've tried them with shot them only "okay." The standout was a .22 Red Wolf Standard barrel and it would shoot 3/4" groups @ 55 yards. The other barrels were 1.5" groups at 55 yards. Past that for distance and it only goes downhill.

I was recently sent some of the heavier "Hunter Magnums." What I was sent weighed 23grains and look very much like a .22 Monster RD from JSB, but with a slight meplat.
The 23 grain Magnum Hunters seemed to do better than most of my attempts with the 19.6grain Hunters.
Here are some groups at 53 and 100 yards. The 100 yards were stringing vertically, and seemed to coincide with slightly tighter fitting individuals.

I measured BCs and the actual BC is nowhere near as optimistic as the technical drawing estimates. I don't remember exactly right now but it was something like 0.042. Not any better than the .22/18.13 made by JSB.
View attachment 9915

So, my conclusion of both weights of NOE pellets is that they make "okay" hunting or plinking pellets, but don't expect stellar accuracy from them. I kept my 19.6grain Hunter mold, and have enough lead from collected pellets to shoot for the rest of my life (and probably my son's), regardless of what the future holds. I figure if it gets to the point that a guy can't buy lead pellets, I'll be happy to have something to make my own, even if they're not as accurate as what we can buy now.
That is exactly why I bought the molds. It doesn't have to be perfect, just good enough for plinking and spinners as well as just having fun making them. I may also do some powder coating just for fun.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top