Where can I get a box box of O rings to fit most PCP guns

[mike56]

• A moment ago

• 
  
• Add bookmark
• #1

I have crickets, Uragans , vulcans, Veterans, Mutants Hubens, Pistol/rifle.Notos, PP750, and reximex ,, I have the 225 pc sae, and meteric on ring box from fright harbor Nitrile if that means any thing, also 270 pc oc green oring seems to be all sae Bot a box of red o rinds about 250 pc no size markings and onother red box wit a huge selection of O rings on T post,,, The ones the made the day to day fixing my Vulcan ii and my PP750 pistol was a set I bought for my Crickets 15 years ago...
Can I buy a box of many O rings just set up for PCP air guns in there common size with the correct O rings in them, Not all rubber O rings are made the same, Is there a best ONE? I bought some from the O ring store that some one told me about for the barrel of the RTI , I think I bought 50, And I have almost used them all I have 5 barrels for my RTI guns , So 50 was just right,,,, And NO I am not good with a caliper, OK but not good,,,,
I am wide open for suggestions , Lets here them,,,
Mike

 

[BanjomanMI76]

Captain O-Ring is my go to place for O-Rings. I have gone there and gotten what I needed on a couple of air guns (and extra's).

 

[PapaT]

I have heard captain o-ring alot lately. But... following to see what else comes up.

 

[GibsonVair]

Following. I have a lot of o-rings, but missing some I sure could use. I need to not be lazy and just catalog what ones my guns use.

 

[Pumacarl]

Good luck finding a all-in-one solution. I have been looking for years. What I always ended up doing is going to Mcmaster&Carr and ordering the exact ones I needed. After a while you will have quite the collection. I have recently started not even looking at the sizes anymore, I just eyeball close matches. I sealed a gun this way and have no leaks. I don't mind taking my airguns apart and changing orings but I hate shopping.

 

[Farmplinker2]

Good luck finding a all-in-one solution. I have been looking for years. What I always ended up doing is going to Mcmaster&Carr and ordering the exact ones I needed. After a while you will have quite the collection. I have recently started not even looking at the sizes anymore, I just eyeball close matches. I sealed a gun this way and have no leaks. I don't mind taking my airguns apart and changing orings but I hate shopping.

Second for McMaster and Carr.

 

[Solo1]

I got a box of orings off amazon but haven’t had to use it much yet.

 

[mike56]

Thanks guys , I bought a box from the oring store with all the common size for air guns also extra 50 size for the size I have used M1.5x5 , Just a pet peeaze of mine in my Motorcycle work or car to need a part and have order and wait days for it to come in,,,, I do think all air guns need to come with a complete list of O rings it takes,,, We should have be a book or a paper with the complete list of O rings . I do feel more competent taking apart a 300 dollar gun than a 2000 dollar gun, And knowing you have a very competent air gun smith you can send your box of parts to if you screw up real bad ,, Hello ZX10 hope I never have to send the box of parts to you , LOL.
Mike

 

[mike56]

I got the box of orings from the o ring store . Its huge just put it aside , Need to take a few pictures and show how big the box is ...
Mike

 

[Grunt64]

Good luck finding a all-in-one solution. I have been looking for years. What I always ended up doing is going to Mcmaster&Carr and ordering the exact ones I needed. After a while you will have quite the collection. I have recently started not even looking at the sizes anymore, I just eyeball close matches. I sealed a gun this way and have no leaks. I don't mind taking my airguns apart and changing orings but I hate shopping.

I don't know how much longer it will last but, Thats where some AEA air gun owners don't have a problem, I can order every O-ring as a kit thanks to Terry Fox. In 4 years only 1 replaced O-ring, the simpler the design the more dependable.

 

[PapaT]

I don't know how much longer it will last but, Thats where some AEA air gun owners don't have a problem, I can order every O-ring as a kit thanks to Terry Fox. In 4 years only 1 replaced O-ring, the simpler the design the more dependable.

Which is where/why AF owners don't have a problem.

 

[Grunt64]

Which is where/why AF owners don't have a problem.

Those are the only 2 I own, Texan .308 and AEA 357 challenger side lever, very powerful and very simple in design, anything after that just complicates things from a hunting standpoint, example, the new cars have all the bells and whistles, power windows power seats, when the motor goes? that never happens to manual windows of seats

 

[Grunt64]

I got the box of orings from the o ring store . Its huge just put it aside , Need to take a few pictures and show how big the box is ...
Mike

Are they rated for the air pressure you will expose them to? Not all o rings have the same rating