Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

What'cha doing air gun related today?

I wanted to practice hold over/under today with minimal support. I took my .177 break barrel and sat in my shooting chair with only my knees to steady up. I tossed out an old vitamin bottle and a pellet tin about 25to 30 yds away. My B/B is sighted in for 10.5 pellets. To challenge myself I used 7.6 CPHP’s. It definitely was a challenge but a great way to get some practice in. It’s fun when each hit changes the range again. Oh well…the trials of time on my hands. Stay well all👍🙏😉
 
I got my new 250z .25 all setup this morning and ready for initial testing. Things did not go smoothly. :(

I was shooting the first shots at 15yds to get my optic dialed-in before moving to my 50yd range. At that close distance shots always go through the same hole with about any rifle I have ever had. Not this time! Impacts were moving around wildly!

Long story short, the JTS 29.63gr were clipping on the last baffle before exiting the suppressor! The clipping knocked a 1/4" chunk right out of the baffle! The suppressor is the Heartland Whisper GL in .25 caliber.

I switched over to my STO Falx suppressor and no clipping occurred.

The two suppressors are about the same length and same diameter. The noticeable difference is the hole through the Falx is larger than the hole through the WhisperGL even though both were sold as .25 caliber???

I just sent a message to Heartland asking for advice and what my options are to fix the WhisperGL?

Shameless bump!

I just wanted to report that Heartland responded instantly to my contact about the clipping issue with the WhisperGL suppressor. He's sending me out a replacement core in .30 caliber first thing in the morning at no additional charge! Can't beat that kind of 'customer support'! :cool:
 
I got my new 250z .25 all setup this morning and ready for initial testing. Things did not go smoothly. :(

I was shooting the first shots at 15yds to get my optic dialed-in before moving to my 50yd range. At that close distance shots always go through the same hole with about any rifle I have ever had. Not this time! Impacts were moving around wildly!

Long story short, the JTS 29.63gr were clipping on the last baffle before exiting the suppressor! The clipping knocked a 1/4" chunk right out of the baffle! The suppressor is the Heartland Whisper GL in .25 caliber.

I switched over to my STO Falx suppressor and no clipping occurred.

The two suppressors are about the same length and same diameter. The noticeable difference is the hole through the Falx is larger than the hole through the WhisperGL even though both were sold as .25 caliber???

I just sent a message to Heartland asking for advice and what my options are to fix the WhisperGL?

Nice catch. Good thing is you didn't chase your point of impact and frustrate yourself. Hope they do right by you.
 
Changed out batteries to see if that would fix my chrono woes (it did!) Shot about 35-40 shots from the Pinty Nightfall Mk2 FDE with my new AEA 18.3gr pellets. One random low reading really opened the SD up, but most of the shots maintained a pretty good average. Oh yeah, also tested some new features (for me) in Bill's Airgun Fun site!20261120_153605.webp
 
I'm dinkin' around with a couple little things on my new 250z .25 today. No shooting today (so far) . Right now I'm on here as I'm letting some thread binding (no thread locker) glue(s) setup. Locking some pins down that like to move when the rifle is fired. Also, binding-up the hammer adjuster plug and the sleeve that adjuster plug fits into.

I like to get all the little stuff squared-away before I really start working on the tune. :)
 
While watching college football in my hobby room, I couldn't resist working more with my second 250z in .25 caliber.

I was curious just how much difference in velocity the aftermarket C88 plenum (14cc) for the 250z would make vs the stock rifle with all other things staying the same?

I haven't settled-in on a pellet or tune yet with the .25 so I used pellets I have on hand to experiment with. I used the FX 25.4gr because a have a mostly full tin not being used.

My starting regulator pressure is set at 1750psi so the results below are based on that reg. setting.

250z .25 W/FX 25.4gr and stock 15cc plenum - 882fps (avg. 20-shots)

250z .25 W/FX 25.4gr and C88 added 14cc Plenum (29cc total) - 912fps (avg. 20-shots)

So all things being equal with the rifle..., adding the extra 14cc plenum raised the velocity 30fps.

Now I am curios to learn whether the velocity gain will be linear as I turn the regulator up or down??? Any guesses?
 
I've got to get the shroud on my hatsan 135 clocked correctly. When I removed it to check the muzzle I wasn't as careful as I should have been when tighting down the nut that holds the shroud to the barrel. I was using a red dot at the time so it wasn't important. I think the red dot died. So now I need to make sure the iron sights are good.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top