What'cha doing air gun related today?

[JimT66]

Missed a recording opportunity. A small raccoon showed up. I turned off the auto recording while I waited for it to come back into the KZ. I stuck a perfect 25 cal hades head shot. It hit the ground like a ton of bricks and did 3 flops and died right under the place I shot it.
This was several minutes prior. I actually shot it standing on a platform I built above the feeder. It was looking directly at me.
I’ve been trying to catch this one for a month. It makes my neighbors dog go crazy at night.

Great shooting!

 

[Florida_Man]

I was modifying the stock on my P35 so I can adjust the HS without having to remove the stock. While im doing that I discover this. I can’t believe it’s still holding air.

 

[Madhatter]

Are you sure there isn't Orings in side. It looks like it's a end cap for a pressure tube. I have no experience with that rifle so this is just a guess.

 

[Florida_Man]

The regulator screws into the piece on the right with the bleed screw. Then the pressure tube screws in. It’s not a too much of a surprise that it’s bulging. I had it apart a few months ago doing maintenance and looking at the reg. I probably caused the issue.

 

[Soren Drost]

Last trim of the season at my private range

All set out to 200 meters

 

[Florida_Man]

PP700SA and Leshiy are staged for any pests in the backyard.

 

[Florida_Man]

I’ve been using ChatGPT to help tune rifles. Today I shot a string with two pellets in one recording session with a Labradar. I started with HS flush and shot 3 of each pellets, then increased HS by a half turn and repeat. With my reg pressure the 18.13gr is a 4 turn and FTT are 4.5-5 turns.
I already tuned the rifle on my own before this and it’s exactly where I landed. It’s not rocket science, I just like having fun with GPT. The bigger project I am using it for is springs to try as replacements in my rifles.
I also plinked a little with the pp700sa and leshiy.

 

[FL22]

I’ve been using ChatGPT to help tune rifles. Today I shot a string with two pellets in one recording session with a Labradar. I started with HS flush and shot 3 of each pellets, then increased HS by a half turn and repeat. With my reg pressure the 18.13gr is a 4 turn and FTT are 4.5-5 turns.
I already tuned the rifle on my own before this and it’s exactly where I landed. It’s not rocket science, I just like having fun with GPT. The bigger project I am using it for is springs to try as replacements in my rifles.
I also plinked a little with the pp700sa and leshiy.

I don’t suppose you could use it to help me find this spring’s dimensions/specifications .

Daystate Wolverine Safety Button Spring Part No. D3RWSABUSP​

It’s part number 25 in the exploded parts diagram.

 

[PapaT]

Did some 880 plinking at 20 yards while cleaning the yard of its fall foliage and burning them off. Happiness is fall, football, fire, and backyard airgunning.

 

[Madhatter]

Finally got the regulator to stop leaking out the vent hole. There was a couple of hairs across the Oring in between the Oring and the regulator body. It's really hard to keep hair out of things I work on in the house. We have 7 dogs and a cat.

 

[Florida_Man]

I don’t suppose you could use it to help me find this spring’s dimensions/specifications .

Daystate Wolverine Safety Button Spring Part No. D3RWSABUSP​

It’s part number 25 in the exploded parts diagram.

I tried and it can’t find any documented measurements. Did you try a Bic pen spring cut to size yet, or a Bic lighter if it’s smaller

 

[FL22]

I tried and it can’t find any documented measurements. Did you try a Bic pen spring cut to size yet, or a Bic lighter if it’s smaller

That’s the next step. It’s probably gonna be the lighter. This spring is tiny, I ordered a 45 assorted piece spring kit supposedly “small” sizes from Amazon and nothing was even close.

Thanks for looking .

 

[Florida_Man]

Windy and gusty, so I took the time to try and learn it. I also shot some strings with JSB and AEA 18's

 

[Soren Drost]

My view on a cold Sunday afternoon for a couple of hours

 

[Madhatter]

Shot my impact after finally getting it to stop leaking. Even though I removed the scope after reinstalling it it was still right on.

 

[Dogowski]

My view on a cold Sunday afternoon for a couple of hours

View attachment 17441

View attachment 17442

Very nice view Soren! I just love the fall but dispise winter. Lol

 

[Soren Drost]

Very nice view Soren! I just love the fall but dispise winter. Lol

I do have a gas heater out here and that works a charm in cold weather, but remember that I am a Viking descendant

 

[Florida_Man]

Hades to the dome this morning

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Danman]

Windy here yesterday! Last evening i shot this squirrel in the act as he was planting the neighbors walnuts on my property . 25Yards offhand. Weight in this configuration? 12 pounds on the dot. The bipod is staying on now, use it for filling, bench, and not a problem for offhand shots when folded up.

 

[Florida_Man]

Hades to the dome this morning

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

A little left, but 25 cal is forgiving.