What'cha doing air gun related today?

[Hateful McNasty]

If that was directed at me, no need.
I also like Hateful's posts.

My post was simply indicating that those who sit amongst us, push the products etc should also give our feedback to the sponsors.

I kinda hope my negative point outs are seen by whoever in these companies ..

I thinking all that sales pitching and endorsement reviews and all is why things are how it is or they feel to get away with it.

Some sites you say something negative and you can be repremsnded or baned or post edited / removed cause you said something about a sponsor / contributor. All they want or allow is the same fluffy sugar coating and applauds that keep promoting the turd of a product. How dare you not ..

Matter of fact a guy posted on just that at his agn post/ thread ...

Lol

 

[Spinach]

all these companies know what they are order for specs wht cant they just include that when they sell a gun? or post in on their website its not brain surgery they know what the o-rings are.
not all of us live where we can just go down the road and get the stuff.
i have to mail order anything i need. and i have no clue as to what the sizes i would need are?
and i should not have to spend hrs trying to serch the internet and figure it just just to have messed up and got the wrong ones and wate for more. i say thats bull shlt.
thats just me and my two cents on the matter.

I've waited over 6 months for Daystate/brk parts. Ordered direct from Daystate.

I kinda hope my negative point outs are seen by whoever in these companies ..

I thinking all that sales pitching and endorsement reviews and all is why things are how it is or they feel to get away with it.

Some sites you say something negative and you can be repremsnded or baned or post edited / removed cause you said something about a sponsor / contributor. All they want or allow is the same fluffy sugar coating and applauds that keep promoting the turd of a product. How dare you not ..

Matter of fact a guy posted on just that at his agn post/ thread ...

Lol

All valid and fair comments, surely those with the fingers already in the pie could simply help with some o ring sizes.

Beneath their sponsorship grade?

 

[FL22]

If that was directed at me, no need.
I also like Hateful's posts.

My post was simply indicating that those who sit amongst us, push the products etc should also give our feedback to the sponsors.

Spinach, absolutely not. I think sometimes we forget that the whole world could be looking at this forum even if they’re not a member, they could be a guest. Sometimes I say things in very broad strokes but everyone’s unique perspective can interpret meaning. I always welcome anyone asking me, What do you mean by that? I know I can be ambiguous, sometimes intentionally.

 

[Florida_Man]

Brocock has the diagrams on their website...... But they don't have a table to show what the numbers indicate....

 

[Spinach]

I'm happy to read broad strokes etc.
That's my style.

My comment was simply to clarify I have no issues with Hateful.

We also need to be aware and honest with ourselves when liking the subtly sponsors posts. As you say, the whole wide world could be reading and believing.

 

[Florida_Man]

I emailed Brocock to try and get the information from them. They have been great to deal with in the past.

 

[Danman]

It is a huge problem with this sport/hobby 100%. I got my Hill hand pump story around here somewhere....To my door, shipping etc about $400 . The main o-ring lasted a few months (moderate use) no big deal I get it, it's alot of pressure. Yeah good luck finding that o-ring BIGGGG SECRET. Long story short can't get it, can only get the rebuild kit so I got em locally. Would it kill them to: 1 include o-ring size or 2 include some spares. Can't imagine my $2/3K pcps down for an o-ring but we all know....that day will come.

 

[Danman]

I've waited over 6 months for Daystate/brk parts. Ordered direct from Daystate.

All valid and fair comments, surely those with the fingers already in the pie could simply help with some o ring sizes.

Beneath their sponsorship grade?

That's why I love SUB12. Often posts sizes. Marno on his vids did as well. BIG LIKE FROM ME!!!

 

[Florida_Man]

Brocock Concept Lite 22 update
When i took the rifle apart I increased the reg pressure a little to get the velocity up on 18gr pellets. I've found that the FX 18 gr pellets show up in better shape then the 15.9 gr.

The hammer spring tension screw is not like one I have used before. The threads are on the piece that hold the stock to the receiver. It is incapable of "maxing out" because it will screw through the available threads then be loose behind the hammer. I had to put a little tension by pulling the cocking lever and turn it back out to catch the threads.
I was trying to max it out then count back turns to have an idea with tuning.
Its difficult to measure from the minimum HS because the screw sits inside the folding stock unit. I decided to just use calipers to record my HS settings.

From flush at the rear it takes 8 turns to get near where the rifles needs to be, so again the caliper method works a lot better.

 

[Florida_Man]

I'm really considering a huma reg tester. I like data.

	Velocity	FPE
1	887​	31.6	250 bar
2	882​	31.3
3	882​	31.3
4	882​	31.3
5	881​	31.2
6	882​	31.3
7	880​	31.1
8	879​	31.1
9	879​	31.1
10	881​	31.2
11	879​	31.1	200 bar
12	879​	31.1
13	881​	31.2
14	876​	30.8
15	879​	31.1
16	880​	31.1
17	876​	30.8
18	879​	31.1
19	879​	31.1
20	878​	31.0
21	881​	31.2
22	878​	31.0
23	879​	31.1
24	877​	30.9
25	877​	30.9
26	882​	31.3
27	881​	31.2	155 bar
28	879​	31.1
29	877​	30.9
30	877​	30.9
31	882​	31.3
32	881​	31.2
33	878​	31.0
34	877​	30.9
35	873​	30.6
36	871​	30.5
37	867​	30.2
38	863​	29.9

 

[Florida_Man]

First 34 shots

 

[Danman]

I'm really considering a huma reg tester. I like data.

	Velocity	FPE
1	887​	31.6	250 bar
2	882​	31.3
3	882​	31.3
4	882​	31.3
5	881​	31.2
6	882​	31.3
7	880​	31.1
8	879​	31.1
9	879​	31.1
10	881​	31.2
11	879​	31.1	200 bar
12	879​	31.1
13	881​	31.2
14	876​	30.8
15	879​	31.1
16	880​	31.1
17	876​	30.8
18	879​	31.1
19	879​	31.1
20	878​	31.0
21	881​	31.2
22	878​	31.0
23	879​	31.1
24	877​	30.9
25	877​	30.9
26	882​	31.3
27	881​	31.2	155 bar
28	879​	31.1
29	877​	30.9
30	877​	30.9
31	882​	31.3
32	881​	31.2
33	878​	31.0
34	877​	30.9
35	873​	30.6
36	871​	30.5
37	867​	30.2
38	863​	29.9

Right in the sweet spot for those pellets! I guess last 2/3 dropping off reg then?

 

[Luis Leon]

Plinking cans at 102 yards with my Pathfinder XR after work…

 

[Florida_Man]

Right in the sweet spot for those pellets! I guess last 2/3 dropping off reg then?

This rifle doesn't show a clear point that happens like other rifles I've had. I think around 30-32

 

[Florida_Man]

I’m going to try out a marauder pistol lower on my 2250 build

 

[Florida_Man]

I put a DonnyFL QD on my Concept

 

[Chief55]

Can you hear me now? Put the Koi on my Eagle Claw carbine. Wow, double muffled, no report at all, just a little ping and the pellet hit. That was fun.

 

[Hateful McNasty]

Can you hear me now? Put the Koi on my Eagle Claw carbine. Wow, double muffled, no report at all, just a little ping and the pellet hit. That was fun. View attachment 5685

I'd see eagle claw and think fishing hooks not pcp gun ..lol. Looks good .

 

[Florida_Man]

I’m been shooting my Concept Lite and CZ200 Hunter. Paper target and steel rat.

 

[Florida_Man]

And I pulled out the Bullshark and it’s shooting knockout 10 gr mlk3 well.