Pinty Vanguard guide to disassembly, fixing leaks and adjusting regulator

[non3]

I posted this guide on Airgun Nation:

N/A - Pinty Vanguard guide to disassembly, fixing leaks and adjusting regulator

Overview This is a guide on: disassembling the Pinty Vanguard fixing leaks adjuting regulator This guide has 3 main sections: -disassembly, showing photos at each steps -fixing leaks -adjusting the regulator This is the Pinty Vanguard schematic and part diagram Before reassembly check...

www.airgunnation.com

I wanted to post this guide here too, but there is a limit of 20 images in a post.
@hameditor I am not sure why there is that max 20 images limit.

 

[benj397]

Put it in a pdf and attach it. Or divide it and put in multiple posts.

 

[PapaT]

Great write-up, did your Vanguards leak from the start?

 

[non3]

Great write-up, did your Vanguards leak from the start?

One leaked so fast that it could not be filed. The other one leaked after I shot it 2-3 times.

 

[non3]

Put it in a pdf and attach it. Or divide it and put in multiple posts.

Too much work I already spent 3 hours on the guide.