Others Off Hand Challenge 9/21/24 - 9/28

[FL22]

I printed the file @FL22 attached to the 1st post. I printer one as Letter & the other as A4. They do indeed print in different sizes. Scaling on both was set to 100% the only setting that was changed was the paper size. I measures the total width of both targets.
Letter 6. 13/16"
A4 7 9/16View attachment 8404View attachment 8405

Thank you @Gramps-Too !!

I will redo mine in the letter size, after all this is a Challenge.

 

[Gramps-Too]

Converted it to a PDF think it's the same size as the one @FL22 originally posted. The outer rings print a little light but may be my printer which keeps telling me it's low on ink.

 

[Gramps-Too]

Thank you @Gramps-Too !!

I will redo mine in the letter size, after all this is a Challenge.

Already done see above post

 

[Florida_Man]

Converted it to a PDF think it's the same size as the one @FL22 originally posted. The outer rings print a little light but may be my printer which keeps telling me it's low on ink.

My OCD is kicking major for the fuzziness haha

I used the image from the initial post and printed with irfanview with these settings


Gramps white ring around 10 is 12mm
Printing the OG image with these settings is 11.5mm

Gramps is left. As I said, I'm just looking to participate.

 

[Florida_Man]

The AA S200 has potential, I just need to practice and take my time haha

 

[Hateful McNasty]

Gamo, irons , 1-1/2" bull( black) standing freehand, 20y, cphp 22

First 5

Next5


I need to be renamed from hateful mcnasty to Bob Weaver ( get it?) .

Added this as well for funs

 

[Hateful McNasty]

Converted it to a PDF think it's the same size as the one @FL22 originally posted. The outer rings print a little light but may be my printer which keeps telling me it's low on ink.

I'm struggling on a clear download ( blurry?) but I stoled your picture with the one outer ring size you wrote on it ..

I just wanted to expand on that with a info box at the corner as a idea to show sizing to check ..

Just for a example to maybe add info to download target page

 

[Gramps-Too]

I'm struggling on a clear download ( blurry?) but I stoled your picture with the one outer ring size you wrote on it ..

I just wanted to expand on that with a info box at the corner as a idea to show sizing to check ..

Just for a example to maybe add info to download target page
View attachment 8421

Sorry for triggering your OCD, was not my intention So I went to Airgun Center and they had the target in PDF format, be for warned it's a large file so it take a bit to load and to get started printing. I was afraid of trying to make it smaller in fear that it would effect @Hateful McNasty's OCD.

Picture of one printed

 

[Hateful McNasty]

Sorry for triggering your OCD, was not my intention So I went to Airgun Center and they had the target in PDF format, be for warned it's a large file so it take a bit to load and to get started printing. I was afraid of trying to make it smaller in fear that it would effect @Hateful McNasty's OCD.

Picture of one printed

View attachment 8424

I got that ocd swinging bud .

I don't understand .. affect me ? All I want is a size of the rings and apparently that's way over your head to do .. as far as I care the ones I draw are all I need anyway and there to a same size everytime ..

If it takes a full letter page target at 20y ( on irons at that ) i just need to stop shooting . Lol.

 

[Hateful McNasty]

My OCD is kicking major for the fuzziness haha

I used the image from the initial post and printed with irfanview with these settings
View attachment 8412

Gramps white ring around 10 is 12mm
Printing the OG image with these settings is 11.5mm

Gramps is left. As I said, I'm just looking to participate.

10 ring is 12mm ? that's near 1/2 inch circle.. (.472")

And still yet all this and not nothing on that black ring size yet ..

Ya, if it's just to participate then why go through all this? Like my hand drawed 1-1/2" circle is all you need to just participate..
Remember it was said not a competition..
Still you'd think everyone would need to use the same size target if not then why do any of this download and print crap ?

Just draw something in a paper and just shoot a group..lol

 

[Hateful McNasty]

I'm out it's all yours to do ...sorry

 

[FL22]

Sorry for triggering your OCD, was not my intention So I went to Airgun Center and they had the target in PDF format, be for warned it's a large file so it take a bit to load and to get started printing. I was afraid of trying to make it smaller in fear that it would effect @Hateful McNasty's OCD.

Picture of one printed

View attachment 8424

Hey Gramps thanks again for your help. Unfortunately the pdf file you provided still doesn’t work for me. But……

Everyone should be able to go here (like I did)

Free Printable Air Rifle Targets (A4, 17cm & 14cm) - The Airgun Centre

Here are some free printable air rifle targets we’ve made for you to use. We’ve made each of them in 3 sizes: A4, 17cm x 17cm and 14cm x 14cm to fit most target units available in the UK. A4 Printable Rifle Targets 17x17cm Printable Rifle Targets 14x14cm Printable Rifle Targets We hope you have […]

www.theairguncentre.com

and see what the target and download and print it.
It’s the A4 size (near the beginning of the list of targets)

 

[FL22]

I'm out it's all yours to do ...sorry

I get what you’re trying to do here. I agree with you that the targets should be the same size as much as reasonably possible, or have measurements so that there is an apples to apples comparison.

So I think it’s for the best if everyone just download
the target from the website that I posted above (post #52) that is its origin.

 

[FL22]

@Hateful McNasty this was downloaded and printed from the website above.

 

[Danman]

See, everyone spending $5 on a 100 pack of Air Venturi targets wasn't such a bad idea after all This is stressing me out, I need some group therapy

 

[FL22]

See, everyone spending $5 on a 100 pack of Air Venturi targets wasn't such a bad idea after all This is stressing me out, I need some group therapy

Yeah, isn’t that what you and I talked about initially?lol

Speaking of “Group Therapy” I plan on shooting targets again, need to tighten up .

Besides the Challenge doesn’t officially start till 9/21.

 

[Gramps-Too]

I got that ocd swinging bud .

I don't understand .. affect me ? All I want is a size of the rings and apparently that's way over your head to do .. as far as I care the ones I draw are all I need anyway and there to a same size everytime ..

If it takes a full letter page target at 20y ( on irons at that ) i just need to stop shooting . Lol.

You don’t have a ruler or measuring device? If you want it measured you measure it. To busy shooting to measure targets

 

[Florida_Man]

Making it a PDF or any other format does not fix the issue of printer settings. Some can print borderless, some cannot.
The key is to have a line in them that can be measured
I did a quick publisher and put in a 1" line
If you prints and its not one inch, you have to adjust your settings.

I'm not saying this is what to be used, but its an easy way to check.

 

[Florida_Man]

Printed

 

[Florida_Man]

I figured I would work this into the hi/lo I am doing here

NE 8 mph Gusts 18mph