Others Need help with an ID

[Johnney]

I got a Scott tank a couple weeks ago and got a valve from amazon to change it out with. The info I was given from the seller was not good. The one I got was smaller than I need. But I’m not sure if there is an adaptor or I need a whole new valve. Can someone try to help?
The one on the left is 5/8-18

 

[Madeintheuk]

airtanksplus has adapters to help. The valve you got looks like an M18 for a standard pcp bottle. Not an scba.
You also have the option of getting a fill station to fit the factory valve with a cga347 fitting. That’s what I use, and have multiple scba tanks I can use the same fill station on.

 

[Johnney]

airtanksplus has adapters to help. The valve you got looks like an M18 for a standard pcp bottle. Not an scba.
You also have the option of getting a fill station to fit the factory valve with a cga347 fitting. That’s what I use, and have multiple scba tanks I can use the same fill station on.

Thank you!

 

[Johnney]

I just ordered the m18. See how this one goes.

 

[Madeintheuk]

I just ordered the m18. See how this one goes.

The M18 is not what you need. The threads on the factory valve are larger. Unless you’re looking for an adapter.

 

[Johnney]

The M18 is not what you need. The threads on the factory valve are larger. Unless you’re looking for an adapter.

An adaptor would work also.

 

[Johnney]

Stikman arrived and is working great. PSA if you don’t have one, get the dead head fitting.
Thanks for the info