Others Fusion 2 co2 cartridge problem.

[Blackdiamond300]

For the life of me, I absolutely can't get the gun to pierce both co2 cartridges. It is just the one toward the barrel. Been like this since i bought it. Dont know if it needs broken in or what.

 

[PapaT]

For the life of me, I absolutely can't get the gun to pierce both co2 cartridges. It is just the one toward the barrel. Been like this since i bought it. Dont know if it needs broken in or what.

Try a dime or penny between the cartridges. Not all 12g co2 carts are the same size/shape, and can be enough to prevent piercing. Something I learned from my dad, although I don't remember which brand co2s he said he has to coin between.

 

[Blackdiamond300]

Try a dime or penny between the cartridges. Not all 12g co2 carts are the same size/shape, and can be enough to prevent piercing. Something I learned from my dad, although I don't remember which brand co2s he said he has to coin between.

I had debated the penny trick. Might have to actually do it

 

[CCook]

I’ve put dimes, I’ve put 2 dimes, I’ve tried all manner of things with no consistent success until I just unscrewed the whole tube threw it as far as I could and screwed on an 88 gram bottle and never looked back. I shoot mine nightly now at rats and I can’t tell you how much better it is. Gets almost 200 shots per. I haven’t done the math as far as cost goes and don’t care. The gun is so much better I actually shoot it now. It had sit in the corner for awhile because of this issue.

 

[pan60]

@CCook
Welcome to HAM