Ghost BRK Ghost regulator adjustment video

[DaystateAmerica]

Hello H.A.M community! Below is a video on the BRK Ghost which shows how to adjust the HUMA regulator both up and down. I hope you find the video informative and find that adjusting the regulator is not as intimidating as it may seem.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

- Chris Jensen
Daystate America

 

[Eric Brewer]

Thanks for giving us this video!

 

[Soren Drost]

Very nice AOA and great job, Chris !

 

[EDventure Outdoors]

Great video!

My comment on YouTube: I imagine each model has an optimal min and max regulator setting which would be helpful to know for tuning for pellet weights and FPS.

 

[KodiakJac]

Airguns of Arizona is now advising to never dry fire the BRK Ghost to a fully empty plenum as the Brocock BRK Ghost Official Handbook explains when preparing to adjust the regulator down, but rather dry firing the plenum down to the 50 to 70 BAR range and stopping there to adjust the regulator down. This new procedure will help you avoid a jammed cocking lever resulting from a stuck hammer which can happen when dry firing the plenum to fully empty.

Airguns of Arizona is going to contact Brocock BRK and ask them to modify the BRK Ghost Official Handbook to this new procedure.

 

[tec]

My first couple depressurizings via dry firing did not result in a jammed cocking lever. But I also found that by adjusting the Regulator to max pressure prior to disconnecting the bottle the gun will vent out the bottle connection, and that is how I depressure my rifle now.