Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

New Western Wrangler PCP Air Rifle

New Western Wrangler PCP Air Rifle

The new Western Wrangler PCP air rifle is a “slug first” gun with a 1-in-16 Inch twist rate barrel that shoots heavy pellets well, too. It’s a model that will attract attention for a number of reasons…


Western Wrangler PCP Air Rifle Highlights​


New Western Wrangler PCP Air Rifle


Available in .22 caliber, the Wrangler is specified for a maximum of 65 Ft/Lbs in .22 caliber. That’s serious power and explains the recommendation for using heavy ammo!

The second highlight about the Wrangler is the price. It’s selling at just $1,495.99 at Airguns of Arizona at the time of writing.

Highlight three is that it is equipped as standard with a sub MOA barrel. This US-manufactured barrel is machined with cut rifling for high accuracy. It’s a solid 15mm diameter and is mounted in a “free floating” configuration, secured at the breech only.

New Western Wrangler PCP Air Rifle



Western Wrangler PCP Air Rifle Ammo Focus​


Given that the Wrangler requires a diet of heavy ammo, it’s important to examine how heavy that ammo can be.

As the caliber remains constant, the main way to achieve heavier airgun ammunition is to increase the length. So we matched the Wrangler with some 40 Grain H&N Heavy Slugs.

At 11 mm long, these are the longest slugs I have in the Hard Air Magazine ammo dump. As we can see below, they just fit into the Wrangler’s magazine. I definitely wouldn’t want to go any longer/heavier!

Western Wrangler PCP Air Rifle HighlightsWestern Wrangler PCP Air Rifle Highlights


However, the Wrangler’s single shot tray provides much greater ammo length potential. Now we have a whopping 17.5 mm available. This surely will be sufficient for any slug or pellet length that we can imagine. That length would likely be sufficient for a 60 Grain slug!

Also visible in the photograph is the transfer port power adjuster lever.

New Western Wrangler PCP Air Rifle



Western Wrangler PCP Air Rifle Scope And More​


The Wrangler’s compact breech means that a relatively short riflescope is likely to be a good choice. We mounted a Western Airguns 4-16 x 44 FFP scope to the top Picatinny rail. This has a “Christmas Tree” MOA reticle and focuses down to 10 Yards. The result was a very satisfactory pairing with the Wrangler.

HAM-Wrangler-2.jpg


Below, there’s a two-stage trigger with manual – “paddle type” safety.

HAM-Wrangler-8.jpg


Up-front we find the pressure gauge and covered fill probe port. The muzzle is threaded for the installation of a dedicated airgun silencer, where legal. There’s a knurled cover over the threads.

HAM-Wrangler-7.jpg


At the rear, there’s a vertically-adjustable rubber buttpad. The buttstock incorporates a spacer that can be removed if it is desired to reduce the length of pull.

HAM-Wrangler-9.jpg


There’s a short Picatinny rail underneath the stock’s forend. This provides plenty of space for mounting a bipod – such as the Leapers UTG Goliath that we see here.

HAM-Wrangler-6.jpg


Additional short vertical Picatinny rails are located in front of the receiver. This enables lasers, led lights and similar to be mounted if desired.

HAM-Wrangler-10.jpg


All-up weight including the mounted scope is 11 Lbs 2 Oz. So the Wrangler is not a lightweight choice. It certainly feels substantial!

New Western Wrangler PCP Air Rifle


Buy From Airguns Of Arizona
Western Wrangler PCP Air Rifle
​


The post New Western Wrangler PCP Air Rifle appeared first on Hard Air Magazine.
 
So who owns the “Western” brand? As other stated above; the design and parts are unmistakenly BRK (the Compatto model)
What are they trying to accomplish? Marketing?

Seems a bit like what somebody did with the Snowpeak AP900, and they called it the “Air Ventury Alpha”. Or the models of the brand “Barra”, which are 1:1 copies of Snowpeak models (well no “copies” as they are in fact produced by Snowpeak as well…) and the Umarex Zelos comes to mind as well…
 
So who owns the “Western” brand? As other stated above; the design and parts are unmistakenly BRK (the Compatto model)
What are they trying to accomplish? Marketing?

Seems a bit like what somebody did with the Snowpeak AP900, and they called it the “Air Ventury Alpha”. Or the models of the brand “Barra”, which are 1:1 copies of Snowpeak models (well no “copies” as they are in fact produced by Snowpeak as well…) and the Umarex Zelos comes to mind as well…
No, there’s a difference: the Barra and Air Venturi Alpha are both rebrands or OEM products and neither are marked “Made in the USA”. A lot of products are not made by the company whose name is on the product. Snowpeak is considered an Original Equipment Manufacturer (OEM), the majority of their products are sold under other brand names, usually with custom specs. The issue would be if one of these companies brought in a Snowpeak product made in Asia and stamped it with “Made in the USA”. Simply changing “Made” to “Assembled” and keeping the type size the same would possibly remedy it. But, only if the majority of the rifle was assembled in the USA. The FTC takes it serious and applies a $53,000 fine for every item sold and every instance of it being advertised by anyone. That equates to a $530,000 fine for selling 10 rifles. If two dealers advertise it on their website, that’s another $106,000 fine. The interesting part to me, is that I posted previously that AOA was clearing the BRK Compatto out for $600.
 
Sure, I see the resemblance. I was the first one to create a thread and say it. But I think it’s also fair to say that if you’re going to compare it to a Compatto, you should say on steroids or it’s big brother from another mother 🤣. Seriously, the disparity between the two is massive in every way that I can tell.

Does it really matter that it resembles a discontinued BRK Airgun? Not to me, I purchased one primarily because it was in stock and the cost with a HAM discount versus advertised power appealed to me.

Personally I would like the Airgun to speak for itself, let everyday Airgunners get the first word. I don’t need or want hype and deal with preorders.


I’d also like to comment on the “Made in USA” debate.
Firstly, we’re all guilty of some bias. The fact is, until they say otherwise, some of us are making an assumption that they’re getting some parts from BRK. I know I made an assumption with the over the barrel HPA tank,(Snowpeak / FX) and I was wrong because of personal bias.

I’ve learned my lesson so I am going to give Western the opportunity to discuss this rifle and manufacturing before passing judgment.
 
Last edited:
So who owns the “Western” brand? As other stated above; the design and parts are unmistakenly BRK (the Compatto model)
What are they trying to accomplish? Marketing?
@MartinT Good question. I could speculate, but I'll refrain. If you pay attention to the main 3 Western Airgun platforms, you may find that all 3 resemble, and are possibly based upon, another manufactuer's pre-existing airgun designs.

I'm intersted to see what the first takers of this Wrangler will think of its performance. Those Brococks were solid. I wonder how Western may have improved the design.
 
Last edited:
No, there’s a difference: the Barra and Air Venturi Alpha are both rebrands or OEM products and neither are marked “Made in the USA”. A lot of products are not made by the company whose name is on the product. Snowpeak is considered an Original Equipment Manufacturer (OEM), the majority of their products are sold under other brand names, usually with custom specs. The issue would be if one of these companies brought in a Snowpeak product made in Asia and stamped it with “Made in the USA”. Simply changing “Made” to “Assembled” and keeping the type size the same would possibly remedy it. But, only if the majority of the rifle was assembled in the USA. The FTC takes it serious and applies a $53,000 fine for every item sold and every instance of it being advertised by anyone. That equates to a $530,000 fine for selling 10 rifles. If two dealers advertise it on their website, that’s another $106,000 fine. The interesting part to me, is that I posted previously that AOA was clearing the BRK Compatto out for $600.

@Billm thank you for your interest in the Western Airguns Wrangler. It is a fantastic rifle, and we are happy that you are asking questions about it and learning what makes it different from anything else currently on the market.

Link: Western Airguns Western Airguns Wrangler - Precharged (PCP)

The Western Airguns Wrangler draws much of its design and functionality from the Brocock Compatto, using many of the same parts imported from England. In fact, the parts arrive as pieces, and all assembly happens here in America. But it is not merely a rebrand. To say that the rifle is English would be deceptive, as there are significant overhauls, modifications, and American-made parts done stateside. The most important part fabricated here in the United States is the barrel, which is the most costly and critical component of the rifle. It is manufactured by SUB-MOA, Western's barrel supplier (SUB-MOA won EBR a couple of years ago, by the way, so it is a fantastic barrel and a generous addition to this platform). The stock extender is manufactured right here in the United States. The Brocock receiver block is heavily modified, remachined, and transformed here in the United States. The Picatinny rail on the top is American-made. The side Picatinny rail block added for extra accessories (a nice touch for hunters) is American-made. The plenum extension, which is also a very critical addition, is American-made. The labeling on the side of the rifle says “Made in USA with Global Components,” and that stands. It would be false advertising to say that it was “Made in England” because the most critical components of the rifle (barrel,plenum, Picatinny rails, and of course the significant transformation Western Airguns machines from the receiver block) constitute a Made in USA with Global Components label. As for the tube and the trigger, they actually come from Italy. If the rifle were entirely made in England, AOA would no doubt be proud of that label as well, for as you know we are also retailers of Daystate and BRK, which represent some of the finest machining in the industry—so we are happy that Western Airguns utilizes parts from their factory. The Western Airguns Wrangler proves to be everything that it is billed to be: an extremely well-made rifle featuring the best available parts made in the United States along with globally sourced components.


We are open 8:30–5:30 for those who want to purchase the Wrangler today. @Billm you can also make an order by calling 480-461-1113 ext 155.

Wrangler 1.webpWrangler 2.webpWrangler 3.webpWrangler 4.webpWrangler 5.webpWrangler 6.webpWrangler 7.webpWrangler 8.webpWrangler 9.webpWrangler 10.webpWrangler 11.webp
 
Nice looking rifle, but a definite violation of

16 CFR Part 323 - MADE IN USA LABELING​

After reading AOA’s response, I researched a little bit and read about “Qualified Claim” at the Federal Trade Commission’s website.

 
@AirgunsofAZ : Thank you for your elaboration! Nice to see that there are numerous updates and improvents on the Campatto platform, so I understand why this is "marketed" (you've clearly shown us in your post there's more than just marketing, a whole bunch of different parts from multiple OEMs to form an upgrade of an original! (a beefed up, improved version so to say!) Logically one can see this indeed as a different brand now!

On the "made in USA": personally I couldn't care less where a piece of equiment is assembled, (as long as it's done properly!) but for Americans it still seems to be a very big deal, so clearly one can use that as a preferential sales argument.
I take it AOA is stakeholder/owner of the Western brand?

Once again thank you for your openness in answering!
 
@AirgunsofAZ : Thank you for your elaboration! Nice to see that there are numerous updates and improvents on the Campatto platform, so I understand why this is "marketed" (you've clearly shown us in your post there's more than just marketing, a whole bunch of different parts from multiple OEMs to form an upgrade of an original! (a beefed up, improved version so to say!) Logically one can see this indeed as a different brand now!

On the "made in USA": personally I couldn't care less where a piece of equiment is assembled, (as long as it's done properly!) but for Americans it still seems to be a very big deal, so clearly one can use that as a preferential sales argument.
I take it AOA is stakeholder/owner of the Western brand?

Once again thank you for your openness in answering!
No. We are the distributor of Western Airguns, but the company is based in Wyoming.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top