What'cha doing air gun related today?

[PapaT]

Love the Buck-Chrony. Nate’s core product is simple great. @NateChrony

I almost grabbed one to replace my misbehaving natechrony.

 

[Florida_Man]

I almost grabbed one to replace my misbehaving natechrony.

Have you tried cleaning it?

 

[PapaT]

Have you tried cleaning it?

No. That could correct one of the issues.

 

[Chief55]

I order everything I need to start Powder Coating my slugs, so they won't lead up my barrel. I also order some more slugs.

 

[Florida_Man]

Finished a tin of FX 10.3 gr last night, started a tin of Benjamin 10.5gr single die
I took two shots at a target 16 yards away and hit 2cm circle twice. Same poi as the FX at that distance

This is with my Krait.

 

[Florida_Man]

Testing Benjamin Single Die with my marked distances for FX10.5, they are spot on.
3 at each bullseye. I started at 30 and in with the body shot, back out head shots.
The red dots on several of the targets is a 6.35mm
A few bad shots on me, and a little breeze moving the targets. But thats life, and I am confident there will be dead agama in this rifles future

 

[Solo1]

Testing Benjamin Single Die with my marked distances for FX10.5, they are spot on.
3 at each bullseye. I started at 30 and in with the body shot, back out head shots.
The red dots on several of the targets is a 6.35mm
A few bad shots on me, and a little breeze moving the targets. But thats life, and I am confident there will be dead agama in this rifles future

Which gun is this?

 

[Billm]

I order everything I need to start Powder Coating my slugs, so they won't lead up my barrel. I also order some more slugs.

I did some powder coating for my .30 Sonoran a few months ago. I didn’t do it for long. I was coating-slugs that I made. I saw an increase in velocity and not much change in accuracy. It was stripping off the powder coating in the barrel. I didn’t do it long enough to really come to any valid conclusion. I hope you see some positive results.

 

[Florida_Man]

Which gun is this?

Standard Krait

 

[Scriv]

Prepping the ladies. .20/.177 respectively.

 

[Scriv]

Sighting in the new springers.

 

[Scriv]

Sighting in the new springers.View attachment 19409

And the new one in .177

 

[Florida_Man]

I shot a string when the reg was at 91 bar. It recovers to that after 30 seconds. 1.5min 92 bar and after a half hour it will be 94-95 bar. It’s still a new reg, so I am hoping it either recovers faster or creeps less or some kind of that in the middle. This is using a digital gauge on the reg.

 

[Pumacarl]

I did some powder coating for my .30 Sonoran a few months ago. I didn’t do it for long. I was coating-slugs that I made. I saw an increase in velocity and not much change in accuracy. It was stripping off the powder coating in the barrel. I didn’t do it long enough to really come to any valid conclusion. I hope you see some positive results

Were/are you guys using the stuff that ZAN is using on their hyperline? Is their stuff proprietary? I have no clue, but I was watching their video on how shooting them cleans your barrel and I was very impressed. Not impressed enough to buy them at their ridiculous price, but impressed none the less. Hopefully somebody over here can do that cheaper. Even at half the price they're charging, I doubt I'd buy them, and I don't have a problem with blowing money on my toys, but there is a limit.

 

[Billm]

Were/are you guys using the stuff that ZAN is using on their hyperline? Is their stuff proprietary? I have no clue, but I was watching their video on how shooting them cleans your barrel and I was very impressed. Not impressed enough to buy them at their ridiculous price, but impressed none the less. Hopefully somebody over here can do that cheaper. Even at half the price they're charging, I doubt I'd buy them, and I don't have a problem with blowing money on my toys, but there is a limit.

I honestly thought they were just powder coating them. But, I haven’t seen one, other than online. Reloaders have been doing it for years with cast bullets. You can try it out for very little expense. It’s non-toxic, doesn’t stink and can be done in your oven or toaster oven with some parchment paper.

 

[Billm]

Were/are you guys using the stuff that ZAN is using on their hyperline? Is their stuff proprietary? I have no clue, but I was watching their video on how shooting them cleans your barrel and I was very impressed. Not impressed enough to buy them at their ridiculous price, but impressed none the less. Hopefully somebody over here can do that cheaper. Even at half the price they're charging, I doubt I'd buy them, and I don't have a problem with blowing money on my toys, but there is a limit.

You can literally do hundreds, if not thousands of slugs for $20-$30.

 

[Pumacarl]

You can literally do hundreds, if not thousands of slugs for $20-$30.

That's what I figured! The price ZAN is charging is crazy. If it is even close to being a fair price then they are not worth producing at all. I like his ammo, but geeze Louise, not that much.

 

[Billm]

That's what I figured! The price ZAN is charging is crazy. If it is even close to being a fair price then they are not worth producing at all. I like his ammo, but geeze Louise, not that much.

I can see how it would reduce the fouling and was easy to clean with a patch. I was worried a little bit about how uniform it was.

 

[Florida_Man]

Installed the mag holder and a new grip.
Topped of some tanks also

 

[Chief55]

I had a lot of fun shooting slugs and pellets at 50 yards from my .22 Condor slug barrel. The 32.4 grain Seneca pellets will shoot a sub-1-inch group at 50 yards going 1052 so you can shoot them and then slugs at 980 without adjusting for speed.