Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

PCP Went looking for the problem in my Taipan

FL22

Grand HAMster
3,567
12,865
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Country flag
I started having some very concerning accuracy issues with my Taipan Veteran 2, I compared Chrono data, consulted a member and decided that it was time to do some exploring in its internals.

8/25
IMG_3484.webp

Today

IMG_3485.webp

Same ammo and 200 bar fill. I decided to check out the regulator.

IMG_3486.webpIMG_3488.webp

Bottle o-ring was getting pretty close to or was slowly leaking.
IMG_3495.webp
IMG_3489.webp

One of the regulator O-rings was flattened. I replaced them both. A replacement 3 O-ring kit was included with the gun exactly the ones I needed. I made sure to use a digital caliper on the new ones before I installed them, maybe get them cheaper from somewhere else should need arise.

All back together and holding air 👍. IMG_3497.webp

While I had it degassed I also straightened out the bottle to align with the barrel.
 
I started having some very concerning accuracy issues with my Taipan Veteran 2, I compared Chrono data, consulted a member and decided that it was time to do some exploring in its internals.

8/25
View attachment 17815

Today

View attachment 17816

Same ammo and 200 bar fill. I decided to check out the regulator.

View attachment 17817View attachment 17818

Bottle o-ring was getting pretty close to or was slowly leaking.
View attachment 17822
View attachment 17820

One of the regulator O-rings was flattened. I replaced them both. A replacement 3 O-ring kit was included with the gun exactly the ones I needed. I made sure to use a digital caliper on the new ones before I installed them, maybe get them cheaper from somewhere else should need arise.

All back together and holding air 👍. View attachment 17823

While I had it degassed I also straightened out the bottle to align with the barrel.
Great job on the repair man! I'm glad you got her lined up and shooting again.
 
I just wish ALL air gun cane with spesific o-ring size charts size and hardness.
I mean its not like they not now this information. they do put-em in
Fx does nice schematic and parts list. But it took me a while to realize, in the parts list, that they use comma where we merkans use period for the decimal point.

9,3x2,4 made no sense to me.
 
Last edited:
What you using to lube the Internals @FL22? I notice in the one Pic I see some SuperLube....that's a light oil or their grease? Ive been wanting to get that 'reg butter' from @Air Shootist ....but not sure he'd ship it across border...or how much more shipping would cost then the actual product🤨
 
What you using to lube the Internals @FL22? I notice in the one Pic I see some SuperLube....that's a light oil or their grease? Ive been wanting to get that 'reg butter' from @Air Shootist ....but not sure he'd ship it across border...or how much more shipping would cost that the actual product🤨
On o-rings that are internal and in a static mostly undisturbed position I use silicone grease that way it stays in place not puddling inside the gun.

The ones that I will take apart often or receive a lot servicing such as your o-rings used on fill connectors and filters, I use the silicone lubricant.

IMG_3501.webp
 
Last edited:
Zeroed scope started at 25 then went out to 50y winds were 6-15 and rain.

Right side of target upper and lower is just two shots each at 50y. They look okay, but I don’t put much stock in a two shot group for testing purposes.

I also need to put it over the Crono when it’s not raining.

IMG_3505.webp
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top