What'cha doing air gun related today?

[Dogowski]

A nice little piece of kit to update my BRK Ghost .177 HP Slug Edition

Thanks a lot Form Rifle Stocks and Jeff Man from Sub12Airgunners

View attachment 11571

Incredible looking man! I love it.

 

[Dogowski]

I also went back to 13gr pellets with my BullShark. It shots KO’s decent, but really likes 13gr pellets.

3 shots at 10m. The circle printed is 3mm

Man that thing is accurate!

 

[Florida_Man]

After working on my PP750 I got my PP700SA mounted with my Pard NV008S and zeroed for a friend who has a rat issue under her chicken coop. She sent a pic to verify where the pellets go in

 

[FL22]

Pellet testing on my BSA Meteor Super .22

 

[Dogowski]

My Taipan has been has having an ongoing issue with ever increasing difficulty in cocking, lubing the pellet probe and the entire cocking assembly seemed to help. The interval between applications, shorter and shorter.

So I had to take the pellet probe assembly out. I thought I was going to have to get new parts because I could not initially get the pellet probe removed.

The owners manual has an exploded view so I was able to see the retaining ring and I had everything removed.

The probe was basically locked up inside of it.

I was finally able to get the probe out and then use a drillbit to clean up the probe housing.

There was a lot of scarring on the probe and I could see it inside the walls of the housing/tube (whatever it’s technically called)

Polished up the probe and housing, everything works perfectly now.

You would think a high end rifle wouldn't suffer from this kind of defect. Glad it was an easy repair!

 

[FL22]

You would think a high end rifle wouldn't suffer from this kind of defect. Glad it was an easy repair!

Me too!! I don’t exactly have the best track record making repairs on my Airguns .

 

[Florida_Man]

I have some work to do. I think I need to tighten the nut Wes added to this block. I had to order some thin wrenches that will be here tomorrow. Didn’t hold air over night.

 

[Florida_Man]

Seeing what my PP750 can do at 10m
These are 7.87gr pellets.
I made a quick target with Excel. 3mm circles.

 

[PapaT]

Got an updated "family photo" and started the great scoping. So far my "og" has its scope back, in better rings, and new P-diddy has scope part of its 3-in-1 combo installed. Debating if I'll add the reflex sight and laser or not. Still need to ring and scope the 3622, full accessorize the Avenger, and scope the anniversary 362. Still torn on that last one...

 

[Dogowski]

Seeing what my PP750 can do at 10m
These are 7.87gr pellets.
I made a quick target with Excel. 3mm circles.

It's dialed in great man!

 

[Florida_Man]

I continued on the target I started yesterday with my PP750. Things were going well, then started to open up. I ran a patch through, still issues. I found the grub screws in the moderator barrel adapter backed out and it was loose. So I applied some blue thread locker and put them back in. I'm letting that cure overnight and I will resume tomorrow.

 

[Farmplinker2]

Plinked some cans, and drooled over the HW30N from an AOA email.

 

[Madhatter]

Not a darn thing! Cold and windy! Cold isn't the problem. 22 mph gusty wind is.

 

[PapaT]

Not a darn thing! Cold and windy! Cold isn't the problem. 22 mph gusty wind is.

We had up to 50 mph gusts yesterday. 25 or less I'd maybe do.

 

[Madhatter]

22 was the constant. The gusts were much higher.

 

[Dogowski]

Not a darn thing! Cold and windy! Cold isn't the problem. 22 mph gusty wind is.

Same here man, 45 mph winds it's just lousy. Bad thing is it's 58 degrees today so it's ideal as far as that goes!

 

[Dogowski]

Amazon is delivering a scope this afternoon so at least I'll get to mount it on one of my rifles. So I'll have something to do airgun related. We're all just itching to get out right guys?

 

[PapaT]

Finished "scoping" the pinty by adding its reflex and laser. Then I put buck rail adapters on the 3622 and topped it with a cvlife 3-9x32. Before I continue scope/accessories palooza, I started playing gun locker tetris to see what and how I'd be able to keep there. They did not design this thing with scoped guns in mind... the 3 pumpers were booted, but found a way to fit the 4 pcps and 2 "springers". Not a perfect solution, but it'll do for now.

 

[Dogowski]

Finished "scoping" the pinty by adding its reflex and laser. Then I put buck rail adapters on the 3622 and topped it with a cvlife 3-9x32. Before I continue scope/accessories palooza, I started playing gun locker tetris to see what and how I'd be able to keep there. They did not design this thing with scoped guns in mind... the 3 pumpers were booted, but found a way to fit the 4 pcps and 2 "springers". Not a perfect solution, but it'll do for now.

It's going to be in the upper 60s today but once again the fire hazard wind warning is putting a damper on shooting any groups. Winds up to 45 mph still, This weather is really wacky this year! I need pcp airgun therapy!!!

 

[Dogowski]

Finished "scoping" the pinty by adding its reflex and laser. Then I put buck rail adapters on the 3622 and topped it with a cvlife 3-9x32. Before I continue scope/accessories palooza, I started playing gun locker tetris to see what and how I'd be able to keep there. They did not design this thing with scoped guns in mind... the 3 pumpers were booted, but found a way to fit the 4 pcps and 2 "springers". Not a perfect solution, but it'll do for now.

Excited to see how your Pinty carbine shoots PapaT! It holds air and scope is mounted, looking forward to your results brother.