Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Unicorn Season

Still on the hunt. I have decided that I want a slug shooter for long range targets. I don't have one and I know it would be fun. I am leaning heavily to .22 because I don't want to throw heavier slugs down range. A 34gr slug shot at, or near 85fpe is my revised goal. I wanted 40gr for 100fpe but that's not likely without going straight to high end guns, or a larger caliber at higher power. For a time when everyone thinks that we have so many choices, the choices narrow down real quick when you actually look for a specific thing. These Unicorns are indeed proving to be a fantasy. If I just decide to bag the hunt, I am pretty sure that I would end up with an Airmaks at this point, on the high end, they seem to check the most of my boxes. Other than that, this has become an ambush hunt, with me camped out in the classified section.
 
Still on the hunt. I have decided that I want a slug shooter for long range targets. I don't have one and I know it would be fun. I am leaning heavily to .22 because I don't want to throw heavier slugs down range. A 34gr slug shot at, or near 85fpe is my revised goal. I wanted 40gr for 100fpe but that's not likely without going straight to high end guns, or a larger caliber at higher power. For a time when everyone thinks that we have so many choices, the choices narrow down real quick when you actually look for a specific thing. These Unicorns are indeed proving to be a fantasy. If I just decide to bag the hunt, I am pretty sure that I would end up with an Airmaks at this point, on the high end, they seem to check the most of my boxes. Other than that, this has become an ambush hunt, with me camped out in the classified section.
Yikes, yeah powerful slug gun definitely narrows it down a ton! Happy hunting....hmmm you already have a gauntlet right?
 
I have a gen 1 Gauntlet, but that is only a 32fpe gun. Pushing a .25 isn't that bad, .30 and up are easy, but pushing a .22 over 80fpe is tough. I really don't want to go down the FX rabbit hole. The AirMaks Krait X tube version, or the Katran NX, use CZ barrels, no choke, nice. The Krait is probably better for me because of the length, but I really like the simpleness of the Katran. I was out shooting all my pcp's today using my tripod and once setup the long guns are really nice and stable. The whole point though was to find a cheaper gun and shine/transform a turd, not buy top tier, and I don't know if that's possible at this point. Even all of the AEA guns, in .22 caliber, don't come with barrels over 24". If the Challenger bullpup 30" came in .22 then power would be easy, but of course, no dice. I might just have to re-think everything. The Barra 250z is probably capable of shooting the 20ish grain slugs with enough oomph to be intersting if pushed. I might just wait for a refub and do that. I have had excellent luck with re-furbs. Luckily, I am in no rush, nor do I have a specific need, so I can take my time and play it smart, even if the whole thing sounds stupid to do.
 
I have a gen 1 Gauntlet, but that is only a 32fpe gun. Pushing a .25 isn't that bad, .30 and up are easy, but pushing a .22 over 80fpe is tough. I really don't want to go down the FX rabbit hole. The AirMaks Krait X tube version, or the Katran NX, use CZ barrels, no choke, nice. The Krait is probably better for me because of the length, but I really like the simpleness of the Katran. I was out shooting all my pcp's today using my tripod and once setup the long guns are really nice and stable. The whole point though was to find a cheaper gun and shine/transform a turd, not buy top tier, and I don't know if that's possible at this point. Even all of the AEA guns, in .22 caliber, don't come with barrels over 24". If the Challenger bullpup 30" came in .22 then power would be easy, but of course, no dice. I might just have to re-think everything. The Barra 250z is probably capable of shooting the 20ish grain slugs with enough oomph to be intersting if pushed. I might just wait for a refub and do that. I have had excellent luck with re-furbs. Luckily, I am in no rush, nor do I have a specific need, so I can take my time and play it smart, even if the whole thing sounds stupid to do.
Yeah it's hard enough with the premium guns to find a winner in .22 pushing beefy slugs accurately!🧐 That new Snipe gun isn't all that cheap but it seems a good platform for slugs!? I'm after about 55-65Fpe with my Ghost pushing slugs and no way is that gonna be cheap, luckily im also in no huge rush (want it for this coming spring). Agreed on the long guns being more pleasant to shoot...I own zero compacts myself!😆 There was a Ghost on a tripod in one of @hameditors photos from the Daystate/Brk booth a while back with a honking slug barrel on it...., was the most gorgeous Brk I ever saw🤩 I'm not anti FX per se but a used bare bones 600mm Dynamic in .22 would be a fun gun, and there's definitely some improvements to be had on it.
 
Yeah, I am not anti FX either, especially the older ones with solid barrels. I really prefer solid heavy barrels for some reason. I love how solid my Paradigm barrel is, it's incredible for an airgun.
 
Some guys build out avengers in .22 and push some seriously high power numbers. But I doubt when it's all said and done it's still a cheap gun🤔 @Wizard714 has a .22 Avenger thread here on Ham....that gun is craazzzzy!
Holy $h!t Danman! I just checked out the Wizard714 thread you linked. Yeah, I know exactly where he's coming from. Fun is where you find it, or make it, and if you want an investment buy gold not airguns.
 
Holy $h!t Danman! I just checked out the Wizard714 thread you linked. Yeah, I know exactly where he's coming from. Fun is where you find it, or make it, and if you want an investment buy gold not airguns.
Yeah his gun made my Ghost run and hide lol. Slap on some bolt ons, do some custom internal work and the sky may just be the limit. I wouldn't say it's the cheaper route that's for sure though😅
 
Well, my winter project gun will be the Barra 250z .22. Not quite the power level I was hoping to find but interesting enough in a lot of ways.

The paint scheme, and how much I want to paint, are going to be racking my brain for a while. I want to see my shots so I am going to put my Alpha 6 on it. Up until now, I don't remember ever painting a scope, but I am seriously considering painting it, the receiver and pic rail, everything.

I am first going to figure out how to securely bed-in and cutomize an Arca Swiss rail on the bottom of the gun, leaving access for all the controls and guages. I really really like JB Weld, and through bolting, so it will end up solid anyway.

This should be fun.
 
Well, my winter project gun will be the Barra 250z .22. Not quite the power level I was hoping to find but interesting enough in a lot of ways.

The paint scheme, and how much I want to paint, are going to be racking my brain for a while. I want to see my shots so I am going to put my Alpha 6 on it. Up until now, I don't remember ever painting a scope, but I am seriously considering painting it, the receiver and pic rail, everything.

I am first going to figure out how to securely bed-in and cutomize an Arca Swiss rail on the bottom of the gun, leaving access for all the controls and guages. I really really like JB Weld, and through bolting, so it will end up solid anyway.

This should be fun.
Nice choice, shoot it a ton before tearing into it for a base line! Should be real nice on your tripod....pray tell, what is an Alpha 6? The Scope?
 
Well, my winter project gun will be the Barra 250z .22. Not quite the power level I was hoping to find but interesting enough in a lot of ways.

The paint scheme, and how much I want to paint, are going to be racking my brain for a while. I want to see my shots so I am going to put my Alpha 6 on it. Up until now, I don't remember ever painting a scope, but I am seriously considering painting it, the receiver and pic rail, everything.

I am first going to figure out how to securely bed-in and cutomize an Arca Swiss rail on the bottom of the gun, leaving access for all the controls and guages. I really really like JB Weld, and through bolting, so it will end up solid anyway.

This should be fun.
Looking forward to see how this gun comes along. The Barra 250Z is already a proven accurate shooter and i can't wait for some pics of this project! Keep us informed during the process brother.
 
Nice choice, shoot it a ton before tearing into it for a base line! Should be real nice on your tripod....pray tell, what is an Alpha 6? The Scope?
After I check it for basic function, and determine it's not damged, ....there goes the warranty! It's never going anywhere, and I'll fix whatever goes wrong. It is a project gun first, I'll see about it's shooting character after I do the work that I'm going to do anyway, there's no going back. All you guys, with your stats will be my baseline. I have had pretty good luck so far, I'll see if it holds.

I have been checking ballistic profiles generated from data from various reviews and it looks like 20gr slugs are going to be the weight to use. Dana Webb has already determined that his gun does best with the 20.2gr NSA so that is where I'll start for sure.

An Aimsport Alpha 6, is a scope born of legend, by one of the most controversial posters in the past eight or so years over at AGN. Love him or hate him, he was knowledgable and found good deals. The Alpha 6 was determined by him, relentlessly, as the best deal going in optics. A lot of us bought one and tried it. At the time, I think he was right, and it still is a very good scope. Now, I would say that it would be hard to pick a best deal scope, so many are good. Anyway, I have one, and it's going to be getting a permanent home.
 
I have been thinking lately, with all the discussions about market shifts and people losing interest, that a problem for me has been the diversion away from what I really liked when I started down the PCP rabbit hole. My thing wasn't about spending some money, buying the best, and shooting lights out with the best of them. Not at all. I wanted just to be able to get close to top performance on the cheap, by, you guessed it, modding the hell out of the cheaper less qc'd airguns. I found that this was totally doable, but not cheap. In the end I ended up spending more money on a cheaper gun. So, I thought, well that wasn't very smart, then I decided to buy my "grail "gun, fine, I love it, but that's it isn't it? On reflection, I actually had more fun getting the deplorables to work, than actually using guns that just do, out of the box. I have fixed several springers and pcp's and the process and the results are more satisfying than just buying great. I like the hobby and the guns, not just shooting them. I am going back to working on the cheap guns (even if it actually costs me more in the end) because that's what I like to do. I am back on the hunt for that Unicorn of a cheap gun that I can bring right up to top accuracy, just for the hell of it. I haven't given this that much thought yet, but it's going to be something fun to do, and it's all on me.
I'm not really built like you are, but then again I've built a 1911 to match grade accuracy from scratch so I get it. I dig that you own it. Honest about the cost, and all. I hope other air gunners read this, and take note when they talk about the up front cost of other guns. 👍
 
After I check it for basic function, and determine it's not damged, ....there goes the warranty! It's never going anywhere, and I'll fix whatever goes wrong. It is a project gun first, I'll see about it's shooting character after I do the work that I'm going to do anyway, there's no going back. All you guys, with your stats will be my baseline. I have had pretty good luck so far, I'll see if it holds.

I have been checking ballistic profiles generated from data from various reviews and it looks like 20gr slugs are going to be the weight to use. Dana Webb has already determined that his gun does best with the 20.2gr NSA so that is where I'll start for sure.

An Aimsport Alpha 6, is a scope born of legend, by one of the most controversial posters in the past eight or so years over at AGN. Love him or hate him, he was knowledgable and found good deals. The Alpha 6 was determined by him, relentlessly, as the best deal going in optics. A lot of us bought one and tried it. At the time, I think he was right, and it still is a very good scope. Now, I would say that it would be hard to pick a best deal scope, so many are good. Anyway, I have one, and it's going to be getting a permanent home.
Pumacarl, while in search of a "cheap unicorn", might I suggest a Beeman Raider, In .25 cal? A very basic, but decent pcp rifle with a real wooden stock? Just a fwiw though.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top